Workshop Equipment

  • This hardwearing material is a great choice for profiling and re-profiling damaged tools. The heavier 60 grit option is an efficient choice for removing plenty of material, while the finer 120 grit will provide a satisfying finish. Great longevity and highly practical.
  • Long series sawtooth Forstner cutter Long series forstner bit (inch), sawtooth pattern, particularly suited for cutting down the grain. Long series - all sizes are a minimum of 150mm long, will produce over-lapping holes, resharpenable.  
  • Record Power's powerful work lamp is a perfect addition to any workshop. The long flexible neck allows it to be positioned to illuminate even the most hard-to-reach areas and get rid of troublesome shadows, giving a clear view of the work in progress. To further increase the lamp’s flexibility, a sliding collar on the lamp head allows either a spotlight or floodlight beam to be created. The strong magnetic base and magnetic side clip mean the light can be secured virtually anywhere on a machine. Powered by either standard AA batteries or a USB rechargeable lithium battery, this lamp gives hours of uninterrupted use and is ideal for a wide variety of machines such as scroll saws, bandsaws, sharpening machines, lathes and many more.
    Includes:
    • Magnetic base
    • Magnetic side clip
    • AA and Lithium battery holders
    • Micro USB-A cable
  • Record SC3 Chuck Package is lighter and more compact than the SC4, making it ideal for use on any lathe, particularly small to medium sized machines and is still compatible with the full jaw range. The compact design reduces load on the lathe spindles and bearings and gives good access to smaller work pieces. The large jaw slides offer unrivalled strength and holding power that cannot be found in other chucks of this size.
    Supplied complete with the deep wood screw, 50 mm standard jaws and 2” faceplate this package offers unrivalled value.
  • Chuck Insert to fit the Record Power SC1 Mini Chuck and SC4 Professional Geared Scroll Chuck only.
  • Woodturners drill chuck, supplied with chuck key.  
     
     
  • These jaws are fantastically effective for drilling pen blanks. They eliminate the need for a drill press and offer much more accurate results and the deep grip to all four sides ensures incredible holding power. Drilling on the lathe means the feed speed of the drill bit is under your complete control, meaning a superior finish can be achieved on a wide range of materials. These jaws are also useful for working on small finials and similar projects as in addition to their strong grip, the work piece is moved forward from the chuck, allowing greater access. Contraction Square: 10 - 26 mm Contraction Spigot: 11 - 20 mm Expansion: 35 - 64 mm
  • Record have increased the capacity of their larger remounting jaws, whilst ensuring they can still clear the bed of lathes with the popular 12” swing capacity and are capable of holding 275 mm (10 3/4”) diameter bowls in contraction mode. Remounting jaws are incredibly popular due to their flexibility. They work in both contraction and expansion modes and can be fitted behind other jaw sets to create bespoke set-ups to make turning more efficient. The soft stoppers are designed to hold without causing damage, making them ideal for remounting finished or partly finished objects for further work.
  • Long series sawtooth Forstner cutter Long series forstner bit (mm), sawtooth pattern, particularly suited for cutting down the grain. Long series - all sizes are a minimum of 150mm long, will produce over-lapping holes, resharpenable.  
  • Record SC4 Professional Geared Scroll Chuck Package with no insert is perfect for the demanding woodturner, being capable of holding large work pieces yet possessing the precision and compactness to handle more delicate work. This model features an enclosed back with full indexing plate and has pinions driven by a long ball ended hex key to make access easy, even when large work pieces are mounted. This chuck is an insert model which means it is easily future proofed against upgrades and can be used on multiple lathes, even if they have different spindle threads (additional optional inserts required).
    Supplied complete with the deep wood screw, 50 mm standard jaws, 2” faceplate this package offers professional performance at an exceptionally affordable price.
    Please order SC4 chuck insert to suit your lathe  
  • Drive Centres

    £14.99£27.49
    Designed to hold wood securely without splitting, this drive centre gives superior hold. The opposing tooth profiles mean that as they enter the wood, the fibres are pushed together rather than apart, holding the timber together.
  • Skip tooth pattern to suit BS250 & Sabre 250. Also fits RSBS10, Clarke CBS335, Nutool HBS14
  • Records' new pin jaws have been improved by squaring the external shoulder to allow workpieces to properly register against the back of the jaws. This is ideal for use in expansion, to grip tubes in work pieces such as pepper or salt grinders. We have also reduced the internal diameter to 9 mm, making it ideal for making finials or lace bobbins - Thereby increasing its versatility. This set is ideal for miniature turning and to grip workpieces internally without excessive damage or marking. Expansion: 28 - 45 mm Contraction Spigot: 9 - 28 mm Contraction Square: 7 - 27 mm
  • With 28 LED bulbs mains powered, Charnwood's magnetic base light is ideal for any situation where better lighting is required. The flexible arm is 370mm long and is fixed onto a magnetic base that can be turned on and off allowing the LED light to be securely attached to any steel or cast iron base. With 28 LED lights it produces better light than many with the added advantage of emitting very little heat. There is a seperate on / off switch for the LED light and it runs off a standard 240v, 13amp socket and comes complete with a 1.2m cable. Ideal for use with;
    • Bandsaws
    • Lathes
    • Pillar drills
    • Scroll Saws
    • Underpinners

     Specification

    Number of LEDs 28
    Brightness 180 Lumens
    Shaft Length 370mm
    Weight 1.4kg
    Rating Trade
    Warranty 1 Year
  • This robust material is designed to handle the demands of all steels. Not strictly ‘grit sizes’ these belts are built using brick and pyramid abrasive shaping. The highest 3000 ‘grit’ size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels.
  • Stems

    £12.98
    This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9"as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available in ½", ⅝", ¾", ⅞", 1", 25mm, 28mm and 30mm diameters to fit most popular lathes. The same stems are compatible with the Precision Boring System.
  • The parabolic flute design clears the chips quickly. Precise when boring into end grain. Packed in reusable tubes with euro slot.
  • Skip tooth pattern to suit BS300E. Also fits Startrite 301S/301E, Poolewood 1402, Scheppach Basato 3
  • Remounting jaws are incredibly popular due to their flexibility. They work in both contraction and expansion modes and can be fitted behind other jaw sets to create bespoke setups to make turning more efficient. The soft stoppers are designed to hold without causing damage, making them ideal for remounting finished or partly finished objects for further work. Expansion: 95 - 215 mm Contraction Spigot: 59 - 170 mm Contraction Square: 53 - 154 mm
  • Out of stock
    These nylon jaws are designed specifically to be cut with standard turning tools. They can be easily shaped to create bespoke jaws to fulfil exacting requirements and offer excellent grip without marking the work piece. Diameter: 118 - 140 mm Depth: 26 mm
  • Featuring a specialised dovetail profile, these jaws are ideal for turning large bowls, green timber and hollow vessels. They combine the profile of our previously popular 100 mm dovetail jaws with a deep body and internal teeth to improve versatility. The outer dovetail jaws are ideal for large bowls or platters, particularly when gripping onto a spigot and the deep internal toothed body is ideal for large spigots of large hollow vessels. Expansion: 94 - 114 mm Contraction Spigot: 76 - 95 mm Contraction Square: 54 - 74 mm
  • Forstner Extension bar shank

    £30.06£31.75
    Forstner Extension bar shanks  are available in two sizes, to suit Planet's long series saw tooth forstners: 3/8" collar /200mm long Forstner Extension Bar. For sizes 3/8" to 2" 1/2" collar /280mm long Forstner Extension Bar. For sizes 2 1/4" to 4"  
  • These jaws are able to hold the smallest work pieces. The convex internal radius on each jaw is designed to avoid damage to small and fragile work. It allows the user to get very close to support thin work as safely as possible. It also allows good access to work close to the base of a work piece without the tool fouling on the jaws. For maximum support always ensure the workpiece features a spigot long enough to be supported along the full length of the jaws’ internal surface.   SC1 Contraction Spigot: 4 - 11.5 mm Contraction Square: 4 - 11.5 mm SC2 Contraction Spigot: 4 - 25.5 mm Contraction Square: 4 - 25.5 mm
  • The SC1 and SC2 are the first mini-chucks on the market to offer woodturners a premium-quality solution for those who regularly turn small, intricate items - bringing the world-renowned quality of the SC3 and SC4 to the mini-chuck market. The SC2 is a direct-thread chuck and features a larger diameter body than the SC1, at 63.5 mm (2 1/2”), giving larger holding capacities than the SC1.
  • Faceplates

    £14.99£43.99
    Faceplates are the ideal tool for mounting larger or heavier work, for turning across the grain. This cast iron faceplate is precision machined on external faces to a tolerance of 1/1000th of an inch for each inch of radius and CNC turned for exceptional accuracy and balance. It features concentric circular grooves to aid the centralising of smaller workpieces. 
  • Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset.
  • The SC1 and SC2 are the first mini-chucks on the market to offer woodturners a premium-quality solution for those who regularly turn small, intricate items - bringing the world-renowned quality of the SC3 and SC4 to the mini-chuck market. The SC1 works in conjunction with a separately available insert, which means it can be used across a wide variety of lathes with different thread sizes, with a simple change of insert. It also makes a perfect partner to the SC4 chuck, as the inserts are a universal fit between both chucks. It also has a very compact 53.5 mm (2”) diameter body - giving easier access around the workpiece making it ideal for the turning of very small items. Insert must be bought separately.
  • Live Centres

    £21.99£32.99
    A good quality tailstock live centre is an essential accessory when turning between centres. Unlike traditional stationery centres, a live centre rotates with the wood, eliminating burning and increasing hold. All Record Power live centres feature high quality bearings to give long life and resist pressure during use. Sealed for life bearings ensure reliable, long lasting operation.

Title

Go to Top