Workshop Equipment

  • The central locating pin of the drive centre retracts into its body when pressure is applied from the lathe tailstock, leaving the ring of teeth around the circumference to hold the workpiece extremely securely, with clamping pressure spread evenly across the teeth.  The retraction of the locating pin means it cannot split the timber, making it ideal for use with smaller and more delicate work.
    The locating pin tension is adjustable, allowing for lower tension to be set for small, delicate workpieces and higher tension for use with hard woods and large timbers.
    Another key benefit of this design is that the workpiece can be removed from the lathe if required and easily repositioned, using the indentations created by the locating pin and ring of teeth as an accurate guide.
    • The multi-tooth drive centres feature a ring of teeth around the circumference of the tip, with a central drive point to give accurate positioning. This design gives an extremely strong grip, thanks to the many points of contact in the timber, which also minimises the risk of splitting the timber.
    On the multi-tooth drive centre the grip is spread across many small teeth rather than 4 or 6 prongs, it is possible to grip the timber sufficiently just by using the clamping pressure of the lathe tailstock - no need to drive the tips into the wood with a mallet. Another benefit of this design is that your work can be removed from the lathe and accurately repositioned, using the centre point and ting of teeth as an accurate guide. These drives also give a fantastic grip to paper-joint wood blanks, as the ring of teeth grip on many points across the drive’s circumference across both sections of wood on either side of the joint. The 32 mm diameter drive centre is ideal for holding side-grain bowl blanks. It is also suitable for holding natural-edged bowls between centres, particularly if seated inside a 32 mm diameter recess, for extra support from the recess walls. The 16 and 22 mm drive centres are ideal for holding spindle work.  
  • Out of stock
    The Record Power PT310 is a compact yet extremely accurate, powerful and easy to use heavy-duty planer thicknesser. It has been designed to offer serious home users a high performance solution for accurate dimensioning of timber. One of the key features of the PT310 is its parallel table lift design. Changeover from planing to thicknessing mode is fast and easy - simply loosen the cam action table locks and lift the entire table assembly, including the fence, in one movement.
    For a smooth, superior finish, the cutter block has 3 knives and the outfeed roller is rubber coated to reduce marking of the timber as it is fed from the machine. Easy to use, powerful and accurate, the PT310 gives professional performance and results in a compact and cost effective package.
           
  • Large capacity, bench top planer thicknesser.
    • 10'' Planing Capacity
    • 10'' x 5'' Thicknessing Capacity
    • Aluminium Tables To Minimise Weight
    • Extruded Guide Fence For Accuracy
    • Tilting Fence With Twin Guides
    • Rubber Coated Feed Rollers
    • 100mm Diameter Chip Extraction Outlet
    The largest in Charnwoods' bench top machines, still light enough to move off the bench when not in use. The capacity is increased to allow 10" x 5" timber to be accurately dimensioned. The planing beds are precision ground aluminium and the guide fence is a rigid aluminium extrusion which can be tilted and locked at any angle up to 45 degrees when required. The steel thicknessing bed has an extension arm on the outfeed side and is supported in each corner by chain driven adjusting screws. Once the height is set, rubber coated feed rollers pass the timber through the high speed cutter block leaving a beautiful finish with no roller marks. The redesigned dust hood now has a quick action clamp to allow faster removal when changing between Planing and thicknessing modes. The hood fits onto the thicknessing bed during planing operations and is then moved over the top when thicknessing. As a safety feature a location sensor detects that the dust hood has been correctly fitted before allowing the motor to run. Supplied with re-grindable knives, 100mm diameter dust extraction outlet, blade setting tool, 4 adjustable rubber feet, 2.0m power cable and UK 3 pin plug.        
  • A compact and portable planer thicknesser.
    • 8'' Planing Capacity
    • 8'' x 5'' Thicknessing Capacity
    • Aluminium Tables To Minimise Weight
    • Extruded Guide Fence For Accuracy
    • Tilting Fence With Twin Guides
    • Rubber Coated Feed Rollers
    • 100mm Diameter Chip Extraction Outlet
    Light enough to move off the bench when not in use and yet tough enough to produce 8" x 5" timber into flat and dimensioned pieces. The planing beds are precision ground aluminium and the guide fence is a rigid aluminium extrusion which can be tilted and locked at any angle up to 45 degrees when required. The steel thicknessing bed has an extension arm on the outfeed side and is supported in each corner by chain driven adjusting screws. Once the height is set, rubber coated feed rollers pass the timber through the high speed cutter block leaving a beautiful finish with no roller marks. The redesigned dust hood now has a quick action clamp to allow faster removal when changing between Planing and thicknessing modes. The hood fits onto the thicknessing bed during planing operations and is then moved over the top when thicknessing. As a safety feature a location sensor detects that the dust hood has been correctly fitted before allowing the motor to run. Supplied with re-grindable knives, 100mm diameter dust extraction outlet, blade setting tool, 4 adjustable rubber feet, 2.0m power cable and UK 3 pin plug.        
    • The design of the 6-prong drive centres offers an enhanced grip to timber using the principle of opposing tooth profiles. The central point of the tool secures the drive centre in place, the six teeth around it grip the timber securely and the opposing tooth pattern ensures the wood fibres are pulled together to reduce the chance of splitting. Having two more teeth than the traditional 4-prong drive centres, they are ideal for use on hardwoods and larger pieces of wood.
    The grip is spread across 6 prongs, it is possible to grip the timber sufficiently just by using the clamping pressure of the lathe tailstock - no need to drive the tips into the wood with a mallet. Another benefit of this design is that your work can be removed from the lathe and accurately repositioned, using the centre point and ting of teeth as an accurate guide. These drives also give a fantastic grip to paper-joint wood blanks, as the ring of teeth grip on many points across the drive’s circumference across both sections of wood on either side of the joint. The 32 mm diameter drive centre is ideal for holding side-grain bowl blanks. It is also suitable for holding natural-edged bowls between centres, particularly if seated inside a 32 mm diameter recess, for extra support from the recess walls. The 16 and 22 mm drive centres are ideal for holding spindle work.  
  • This live centre kit gives woodturners a huge amount of flexibility, allowing for a wide range of work to be undertaken. The finely engineered live centre body features two sealed-for-life bearings for faultless, smooth performance. The high-precision manufacture ensure that the tips are a perfect fit in the live centre body and a rubber O-ring holds them in place securely. The tips are easily removed from the lathe tailstock using the supplied knockout bar. In addition to the many operations the tips make possible, the live centre body itself can be used to carry out long hole boring – with no tips fitted, it acts as a ring centre to support the workpiece and the body is fully bored to accept the standard 5/16” (8 mm) long hole boring augers.

    Coronet Falcon Interchangeable Live Centre Traditional Tip

    This traditional design features a 60º tip, to give effective penetration into the workpiece, supporting large timbers well. It is ideal for use on spindle work and can also be used to support headstock-mounted bowls and larger vessels from the tailstock. Internal support can be given to pre-bored timbers with bores from 1 to 43 mm in diameter, across the full range of the live centre cone taper.

    Coronet Falcon Interchangeable Live Centre Detail Tip

    This elongated single-point tip gives greater access to the workpiece at the tailstock - ideal for removing the bottoms of bowls, creating small dowels and much more. The tip is angled at 90º rather than the traditional 60º, ensuring the load is spread across a larger area, reducing the chance of splitting small, delicate workpieces.

    Coronet Falcon Interchangeable Live Centre Multi-Tooth Tip

    This multi-tooth live centre tip features a ring of teeth around the circumference, with a central drive point to give accurate positioning. This design gives an extremely strong grip, thanks to the many points of contact in the timber, which also minimises the risk of splitting the timber.

    As the grip is spread across many small teeth rather than 4 or 6 prongs, it is possible to grip the timber sufficiently just by using the clamping pressure of the lathe tailstock.

    Another benefit of this design is that your work can be removed from the lathe and accurately repositioned, using the markings created in the timber by the centre point and ring of teeth as an accurate guide.

    This tip also gives a fantastic grip to paper-joint wood blanks, as the ring of teeth grip on many points across the drive’s circumference across both sections of wood on either side of the joint.

    It makes an ideal partner to the range of Coronet Hawk Multi-Tooth Drive Centres, allowing timber to be held securely at both ends of the lathe quickly, easily and accurately.

    Coronet Falcon Interchangeable Live Centre Pen Turning Tip

    The pen turning tip is a game-changer for pen turners. Rather than use the screw at the tailstock end of the pen mandrel to secure the pen blanks, mechanisms and spacers in place, the pen turning tip simply slides over the mandrel and registers against the spacers. Tailstock clamping pressure is then used to secure the pen components in place between the headstock and tailstock.

    This method means that no pressure is applied to the mandrel itself, eliminating the risk of bowing the mandrel which can cause the final pen to have uneven wall thickness, which in turn stops the pen’s components aligning correctly. Using the pen tip will help you create the most accurate and well-made pen possible. In addition, this method is fast, easy and secure, making it a great time-saving operation for prolific pen turners.

  • This ring centre features two high quality sealed-for-life bearings, giving extremely smooth rotation. The ring design gives a larger area of contact than a traditional live centre for an increased grip. This makes it ideal for supporting small or brittle timbers and works very well with paper-jointed blanks, giving a strong grip to both pieces of timber either side of the joint. Another great advantage of this design is that workpieces can be removed and refitted to the lathe accurately, thanks to the positive location of the centre point and ring, which can be used for easy registration.
  • This live centre features two high quality sealed-for-life bearings, giving incredibly smooth rotation and the 60º point is optimised to give the best grip possible from a single point of contact. It is ideal for use on spindle work and can also be used to support headstock mounted bowls and larger vessels from the tailstock.
  • Out of stock
    This Planer Thicknesser is perfectly suited to the discerning woodworker who expects professional, reliable performance from a solid and durable machine but doesn’t have the space or budget for a larger industrial machine. Heavy duty cast iron tables give this machine a degree of accuracy not found elsewhere on machines of this capacity or price bracket - infeed table is easily and accurately adjusted using the robust lever and clear depth scale. In addition, the PT107 also boasts an outfeed table adjustment facility, meaning truly exact calibration can be achieved to ensure superior accuracy when planing. For easy, rapid conversion to thicknessing mode, the hood is a large, steel one-piece swinging design. The thicknessing table is supported by a substantial central column, giving plenty of support to even the heaviest workpieces. To aid the thicknessing of particularly difficult stock, a clutch is provided on the thicknessing feed to allow removal of stock if jamming occurs. This also means that the thicknesser can be disengaged when not in use to save wear and tear on internal parts.        
  • The Record Power RSBG8 Bench Grinder has a long-established reputation for robustness and reliability, making it the perfect choice for the home workshop. This new and upgraded machine has an industrial-inspired design with a heavy-duty motor and offers improved power, stability and performance. It features fully adjustable tool rests with solid locking mechanisms to give optimum support. The cast iron base and sturdy body reduce vibration to give the smooth operation that is essential for successful and accurate sharpening. Rubber feet also dampen vibration whilst ensuring the grinder does not move during use. The wide body of the machine further increases stability and minimises the load on the bearings for increased life. The 40 mm white stone is ideal for giving a fine finish, particularly to HSS turning tools, while the more coarse grey stone is perfect for rougher grinding and shaping. In addition, the spark guard of the white wheel features a magnifying lens to aid fine sharpening. The build quality and reliability of this grinder is significantly higher than some of the more common and cheaper machines which generally have lower powered motors and are substantially lighter. Record Power grinders are designed to give many years of service and replacement stones are readily available should the original ones become worn out, a sure sign of the robustness of these machines.        
  • The DS300 is a superbly built and heavy duty disc sander; a real workhorse that will provide years of reliable service in the workshop. Featuring a cast iron body, disc and table, this machine is more than capable of withstanding heavy sanding tasks. The powerful motor provides plenty of power and torque to easily handle large sections of timber and the dynamically balanced disc ensures smooth operation. This machine is in a different league to other disc sanders. When seen in action, the build quality and performance speak for themselves.
  • The BM16 is a compact bench mounted morticer, introducing new levels of accuracy, ease of use and industrial features at an affordable price. The table is finely ground cast iron and moves smoothly and effortlessly front to back and side to side on machined dovetail slides. To ensure unsurpassed accuracy, the slides are fully adjustable using the easily accessible gib strips. An important feature of the table is the heavy and solid clamp, the likes of which are usually only seen on more industrial machines, which holds workpieces extremely securely, ensuring no movement during operation. The clamp is also repositionable, allowing a wide range of timber sizes to be accommodated. Movement of the chisel is similarly smooth and accurate, with a gas spring and dovetail slides, which feature adjustable gib strips, allowing cuts to be made with ease and precision. To further increase accuracy and speed of use, the BM16 also features sideways movement stops as well as vertical movement stops. These stops allow the depth and width of mortices to be set in order to achieve consistent results again and again.
  • The SC1 and SC2 are the first mini-chucks on the market to offer woodturners a premium-quality solution for those who regularly turn small, intricate items - bringing the world-renowned quality of the SC3 and SC4 to the mini-chuck market. The SC1 works in conjunction with a separately available insert, which means it can be used across a wide variety of lathes with different thread sizes, with a simple change of insert. It also makes a perfect partner to the SC4 chuck, as the inserts are a universal fit between both chucks. It also has a very compact 53.5 mm (2”) diameter body - giving easier access around the workpiece making it ideal for the turning of very small items. Insert must be bought separately.
  • The SC1 and SC2 are the first mini-chucks on the market to offer woodturners a premium-quality solution for those who regularly turn small, intricate items - bringing the world-renowned quality of the SC3 and SC4 to the mini-chuck market. The SC2 is a direct-thread chuck and features a larger diameter body than the SC1, at 63.5 mm (2 1/2”), giving larger holding capacities than the SC1.
  • This faceplate ring is ideal for holding small to medium sized bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 40 mm jaw set which comes with both the SC1 and SC2 Mini Chucks. Diameter: 68 mm  
  • These jaws are perfect for drilling pen blanks, eliminating the need for a drill press and offering much more accurate results because the deep grip to all four sides ensures excellent holding power. Drilling on the lathe means the feed speed of the drill bit is under complete control, so a superior finish can be achieved on a wide range of materials. These jaws are also useful for working on small finials and similar projects, as in addition to their strong grip, the work piece is moved forward from the chuck to allow greater access.   SC1 Contraction Spigot: 14 - 20 mm Contraction Square: 14 - 24.5 mm SC2 Contraction Spigot: 14 - 20 mm Contraction Square: 14 - 26 mm
  • Another of the most popular jaws for full size chucks – these are also ideal for smaller chuck projects too. We have set the range of these bodies to be compatible with most tea light holder designs (on either body) as well as many salt or pepper pot designs and these offer an excellent expansion grip for many projects. The end of the jaw
    is dovetailed so can be used on its own as a delicate grip – or the jaw can be inserted full length using the back jaw face as a register and providing wall support to prevent the workpiece being knocked from a dovetail only grip. The dovetail at the end provides additional security in expansion mode.
    SC1 Expansion: 39 - 47.5 mm Contraction Spigot: 6 - 14.5 mm Contraction Square: 4.5 - 12 mm SC2 Expansion: 39.5 - 60 mm Contraction Spigot: 6 - 26 mm Contraction Square: 4.5 - 25 mm
  • These jaws are able to hold the smallest work pieces. The convex internal radius on each jaw is designed to avoid damage to small and fragile work. It allows the user to get very close to support thin work as safely as possible. It also allows good access to work close to the base of a work piece without the tool fouling on the jaws. For maximum support always ensure the workpiece features a spigot long enough to be supported along the full length of the jaws’ internal surface.   SC1 Contraction Spigot: 4 - 11.5 mm Contraction Square: 4 - 11.5 mm SC2 Contraction Spigot: 4 - 25.5 mm Contraction Square: 4 - 25.5 mm
  • Regent Variable Speed Lathe is the largest lathe in the exclusive range of Coronet lathes from Record Power and is ideal for the woodturner who regularly needs the power, stability and capacities necessary for very large scale work. It is supported by large and heavy integral cast iron legs to give ample protection from vibration while turning out of balance timbers. The overall heavy-duty construction of the machine, along with the finely engineered and machined components make this lathe a pleasure to use.
     
  • Part of the exclusive range of Coronet lathes from Record Power, the Envoy is perfect for the woodturner who regularly needs the power, stability and capacities necessary for large scale work. Designed as a natural progression from the Coronet Herald, it is supported by large and heavy integral cast iron legs to give ample protection from vibration while turning out of balance timbers.
    The overall heavy-duty construction of the machine, along with the finely engineered and machined components make this lathe a pleasure to use.
     
  • Adds 525 mm to the between-centres capacity of the Coronet Envoy and Coronet Regent.
     
  • The cast iron outrigger for the Coronet Envoy and Coronet Regent allows for the full capacity of the lathe to be used when turning bowls with the head swivelled.
     
  • With 28 LED bulbs mains powered, Charnwood's magnetic base light is ideal for any situation where better lighting is required. The flexible arm is 370mm long and is fixed onto a magnetic base that can be turned on and off allowing the LED light to be securely attached to any steel or cast iron base. With 28 LED lights it produces better light than many with the added advantage of emitting very little heat. There is a seperate on / off switch for the LED light and it runs off a standard 240v, 13amp socket and comes complete with a 1.2m cable. Ideal for use with;
    • Bandsaws
    • Lathes
    • Pillar drills
    • Scroll Saws
    • Underpinners

     Specification

    Number of LEDs 28
    Brightness 180 Lumens
    Shaft Length 370mm
    Weight 1.4kg
    Rating Trade
    Warranty 1 Year
  • Record Power's powerful work lamp is a perfect addition to any workshop. The long flexible neck allows it to be positioned to illuminate even the most hard-to-reach areas and get rid of troublesome shadows, giving a clear view of the work in progress. To further increase the lamp’s flexibility, a sliding collar on the lamp head allows either a spotlight or floodlight beam to be created. The strong magnetic base and magnetic side clip mean the light can be secured virtually anywhere on a machine. Powered by either standard AA batteries or a USB rechargeable lithium battery, this lamp gives hours of uninterrupted use and is ideal for a wide variety of machines such as scroll saws, bandsaws, sharpening machines, lathes and many more.
    Includes:
    • Magnetic base
    • Magnetic side clip
    • AA and Lithium battery holders
    • Micro USB-A cable
  • This brand new lathe from Record Power represents the culmination of many decades of expertise in the manufacture and supply of superior woodturning lathes. Developed with the help of professional woodturners and keen hobbyists, Record believe they have produced a world-class machine for woodturners of all levels. Thanks to a number of innovative design solutions the capabilities, features and performance of the Herald far exceed anything a machine of this size has been capable of before - It brings top-end professional performance at a fraction of the size and cost of comparable heavy-duty machines.
    To reflect the Record Power heritage in a modern context, the look of the lathe incorporates the elegant and balanced curves of the earlier Coronet series in a more streamlined and efficient form. As well as looking great, the Herald feels great - the excellence of engineering, ergonomics and quality manufacturing can be felt throughout, making the lathe a pleasure to use whilst delivering rock solid performance.
     
  • Tubular leg stand for the Coronet Herald.
  • Adds 407 mm extra capacity between centres to the Coronet Herald lathe.
  • To fit the Coronet Herald, giving extra height when mounted to a bench or leg stand.
  • With a cast iron table at the heart of this compact machine it is designed to offer those with limited space or budgets a real bandsaw with sensible capacity and performance, as an alternative to lightweight hobby machines. The BS250 should not be confused with the lightweight hobby machines available in the market at a similar price. It shares the same essential build qualities as its larger cousins – strong steel frames, dynamically balanced bandwheels, cast iron tables and an induction motor. It has been designed to offer the user with space restrictions a serious machine in compact form. The machine can be bench mounted or fitted to the optional stand and wheel kit, providing great flexibility in a tight space.    
  • Record Sabre-250 10" Bandsaw, by taking the most relevant features from the existing SABRE series and applying them to the BS250, Record believe they have produced the best benchtop bandsaw available on the market below £400 / €500. In addition, the capacities, power and performance upgrades, combined with the unique SABRE features now found on this machine, make it a real contender in the general purpose floor-standing bandsaw category when combined with the BS250-AW stand and wheel kit. In this configuration it has quality and features well ahead of many of the lower cost floor-standing machines available in the market. The end result is a premium-quality, affordable bandsaw which retains the compact size of the BS250 while offering improved capacities, usability, accuracy and performance.    
  • This stand and wheel kit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis.
  • Faceplates

    £14.99£43.99
    Faceplates are the ideal tool for mounting larger or heavier work, for turning across the grain. This cast iron faceplate is precision machined on external faces to a tolerance of 1/1000th of an inch for each inch of radius and CNC turned for exceptional accuracy and balance. It features concentric circular grooves to aid the centralising of smaller workpieces. 
  • Drive Centres

    £14.99£27.49
    Designed to hold wood securely without splitting, this drive centre gives superior hold. The opposing tooth profiles mean that as they enter the wood, the fibres are pushed together rather than apart, holding the timber together.
  • Counterbore/Piloted Drives

    £33.66£36.84
    1” diameter 4 prong head. Head relieved behind flutes to prevent binding. Supplied with inter-changeable point, pilot and hex key.
  • Live Centres

    £21.99£32.99
    A good quality tailstock live centre is an essential accessory when turning between centres. Unlike traditional stationery centres, a live centre rotates with the wood, eliminating burning and increasing hold. All Record Power live centres feature high quality bearings to give long life and resist pressure during use. Sealed for life bearings ensure reliable, long lasting operation.
  • Rotating centre with 5/16” bore for long hole boring. Based around a standard duty configuration. Also useful for spindle turning when there is a danger of a centre point splitting the stock. Set comprises: Hollow rotating centre, nose cone for use as standard centre, centring rod.
  • Skip tooth pattern to suit BS250 & Sabre 250. Also fits RSBS10, Clarke CBS335, Nutool HBS14
  • The BS300E is a great all rounder perfectly specified for the medium sized workshop where a range of duties will be required.
    Featuring a solid fence, vital for accurate ripping, which has a heavy extrusion mounted on a cast iron base and fixed to a solid steel bar for maximum rigidity and support. This is based on an industrial Startrite design and much more solid than other fences at this level. The machine also features a solid double trunnion fence mount to provide rigid table support and one-handed table tilt on a smooth rack and pinion. Adding to the structural integrity of the BS300E are the cast iron bandwheels which are fitted with precision ground rubber tyres to provide a flywheel effect for smooth cutting. A solid blade tension indicator is fitted to the rear of the machine to allow for easy setup. The BS300E is also supplied with a basic wheel kit as standard.
  • The wheel kit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis.
  • Woodturners drill chuck, supplied with chuck key.  
     
     
  • Skip tooth pattern to suit BS300E. Also fits Startrite 301S/301E, Poolewood 1402, Scheppach Basato 3
  • Out of stock
    An ideal workhorse for the busy workshop where power and generous capacity are required but budget and space do not allow a bigger machine. This features an open legstand, often requested by our users as it provides greater stability and can be used with an optional pedal style wheelkit. A basic wheelkit is provided as standard. The bandwheels are cast iron and dynamically balanced with precision ground, crowned rubber tyres usually only found on much more expensive industrial machines – the flywheel effect of the cast iron wheels improves cutting performance and speeds. Our tables are some of the largest in their category and a one piece cast double trunnion has been designed to provide even greater support and rigidity. The rip fence is the strongest and most industrial in its category with a chromed fence and the mount machined from a single piece of cast iron. The extrusion itself is a heavy section to provide rigidity and accuracy.  
  • A wet stone sharpening system with a range of jigs and accessories and is also an extremely useful tool for general household tasks, such as the sharpening of knives, gardening tools and many other items. Included in this package is the WG250/K Diamond Trueing Tool, an essential accessory to ensure the outer diameter remains concentric and the sharpening surface perfectly flat. For more details and to see a video click on more info button.
  • Included with the machine are a range of essential tools and jigs, not only making this package fantastic value for money but also allowing accurate sharpening straight from the box. A full range of optional jigs and accessories are available which are compatible with the 12 mm bar system of the Record Power WG250. The WG200 features smooth and responsive variable speed. The torque can also be adjusted, enabling heavier grinding without fear of the stone or honing wheel slipping under pressure.        
  • Out of stock
    This package contains all the sharpening jigs needed for woodturning tools and offers excellent value for money.   Contains: WG250/A Gouge Jig WG250/B Short Tool Jig WG250/I Tool Rest Jig WG250/N Profiled Leather Honing Wheel          
  • The ProEdge Deluxe system includes a skew jig, a standard gouge jig, a fingernail profiler and three different belts in addition to the basic system.
  • The Robert Sorby ProEdge takes all the guesswork and effort out of sharpening all your woodworking, woodturning tools. The ProEdge has an abrasive belt which is a quick and efficient method of putting a keen edge on each and every tool. The cool running belt avoids any overheating. The ProEdge comes complete with aluminium oxide and zirconium belts. The ProEdge requires no complex assembly - it can be plugged in and used straight from the box.
  • This robust material is designed to handle the demands of all steels. Not strictly ‘grit sizes’ these belts are built using brick and pyramid abrasive shaping. The highest 3000 ‘grit’ size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels.
  • Outside caliper with fine adjustment for measuring spindle diameters when turning between centres.
  • Outside caliper with fine adjustment for measuring spindle diameters when turning between centres.
  • This hardwearing material is a great choice for profiling and re-profiling damaged tools. The heavier 60 grit option is an efficient choice for removing plenty of material, while the finer 120 grit will provide a satisfying finish. Great longevity and highly practical.
  • Applied to a buffing mop the honing paste creates a highly polished finish on any steel.
  • Out of stock
    The pigtail mandrel is used to mount the Buffing Mop to the ProEdge sharpening system.
  • Out of stock
    The buffing mop gives that extra fine edge.
  • Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset.
  • The new DML320 lathe offers fantastic value for money, being compact and powerful yet with very generous capacities for a medium sized lathe, giving woodturners the chance to own a high quality variable speed machine at an unbeatable price. The solid cast iron bed, tailstock and headstock offer superb stability, even when turning items at the limits of the lathe’s considerable capacities. At the heart of this machine is the high quality electronic variable speed function, giving smooth and responsive speed change at the turn of a dial, with a highly accurate digital speed readout. The 3 pulley system ensures excellent torque across the full range of speeds and is powered by a high quality and vibration-free motor. The DML320 is also capable of reverse turning, ideal for achieving a perfect finish 
when sanding.        
  • Out of stock
    Featuring a spiral twist, these plain end HSS blades can cut in any direction without the need to turn the workpiece. This is particularly useful for projects that are too big for the throat depth of the scroll saw. They also allow for pieces to be cut with the bevel running in the same direction all round. 0.8 mm wide, 0.34 mm thick, 40 TPI.
  • These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 20 TPI.
  • These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 15 TPI.

Title

Go to Top