This tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibres to produce a burnished finish. The tapered profile reduces the risk of binding in the cut. This features a new and unique cutting profile with a blade profile of 2mm. The long bevel has a milled flute which is the cutting face. When parting off, this causes the tip to cut at a shear cutting angle of 45 degrees, producing a finish without equal from a parting tool.
Robert Sorby 1/16″ Fluted Parting Tool (2mm)
£63.35
Out of stock
Out of stock
Description
This tool has a milled flute running along the bottom edge, creating two sharp spurs at the cutting face. These sever the fibres to produce a burnished finish. The tapered profile also reduces the risk of binding in the cut. This features a radically new and unique cutting profile with a blade profile of only 2mm. The long bevel has a milled flute which is the cutting face. The small bevel is the sharpening face. When parting off, this unique arrangement causes the tip to always cut at a shear cutting angle of 45 degrees, producing a finish without equal from a parting tool, virtually eliminating the need for sanding.
Additional information
| Weight | 341 g |
|---|
