-
Panga Panga is extraordinary in its rarity as it is only found, in commercially viable quantities, inMozambique. Its dark colours, with rich parenchyma bands brings a touch of the exotic to finished pieces. The heartwood is dark chocolate brown with paler broad bands. At 880kg/m3 the heartwood is extremely durable. It sands and finishes well. -
Six replacement paper motor filter bags for CamVac extraction machines. -
This practical new guide to pen and pencil turning, featuring 15 step-by-step projects. Pens from fine and rare timbers to acrylics and polymer clays, the possibilities are endless. Perfect for beginners to the lathe as well as more advanced turners, all the basic techniques and information needed for getting started are covered. From blank preparation to turning, sanding, polishing and assembling, everything is explained clearly and in jargon-free terms. -
Self-centring design. Unique support and threaded rod design for accurate drilling. Holds and centres pen blanks up to 1-1/2 inch square. Quick and easy set up. -
Out of stock
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 7mm, 8.5mm, 9.5mm & 10mm pens. -
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 7mm pens.
-
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 8.5mm, 9.5mm & 10mm pens. -
Out of stock
NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit -
Out of stock
NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit
-
includes: 3 x long series HSS tin coated drills: 6.8, 6.9 & 7mm, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x 7mm pen kits, cones and spacers to suit most sizes of pen kit -
includes: 3 x long series HSS tin coated drills: 6.8, 6.9 & 7mm, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x 7mm pen kits, cones and spacers to suit most sizes of pen kit
-
Features:- Fine control of heat and precise handling of the burning head, variable heat, up to 1100º C.
- The pen (for handpiece) has a cool running and lightweight handle which remains comfortable even after many hours of use.
- Writes quickly and as fluently as a fountain pen.
- Cost effective replacement points.
- The ability to shape your own points from specialist wire with the supplied fine wire, perfect for fine detailed burning. Thicker wire is available, ideal for enhancing bird or stick carving.
-
- Designed for use with the Peter Child Pyrography machine: two pen flexibility at the flick of a switch.
-
Pewter pot pourri lid approx 80mm diameter. -
Pink ivory wood dries slowly and doesn't split easily due to its high oil content. Its attractive colouring makes it ideal for carving, turning, inlay work and even musical instruments. -
Planet Full Face Visor is ideally suited for woodturners and DIYers. It protects your eyes and face from woodshavings, dust, and low energy objects. Simply tighten the adjuster on the headband to get the best fit. Spare visors are also available (FV424V). The optical class Lens visor is made from clear acetate. It measure 320 x 190 mm with a nominal thickness of 1.15 mm. The visor is anti-fog (N). Recommended for protection from impact by low-energy, high-velocity particles. Full Face Yellow Visor Complete: FV424/SS/Y Visor Only: FV424V Yellow Browguard Only: FV424YV -
5 plastic presentation boxs. Each with a clear plastic lid & red pad, complete with protective sleeve.
-
Out of stock
While this resin has been manufactured to resist scratching and resistance to marking from heat sources we must stress this resin will still mark if sharp items are moved across the surface or hot items are placed on the surface.
As with all casting products, we stress that customers should purchase a small amount to perform initial tests to ensure suitability for their project and requirements.
Pigmentation Epoxy pigments are the recommended system to colour this resin however the polyester range of pigments will also work. Please read the Technical and Safety Data sheets prior to use. We recommend small scale testing to ensure compatibility before using at full scale. Cold Weather Notice Cooler temperatures in the UK and Ireland around mid-autumn to mid spring are not ideal conditions for water clear epoxy systems, this can increase the chances of crystallisation in the resin (this can occur at room temperature depending on circumstances, it is however much less common). Appearance can differ depending on the degree of crystallisation, from small lumps sitting on the surface to a hazy/milky white appearance, extreme cases the contents may completely solidify. Crystallisation occurs due to a phase change from liquid or solid similar to that of water turning to ice, fortunately it is easily reversed by warming the epoxy component to 60°c. Ensure any crystals are completely removed as remaining crystals can act as a seed causing the crystals to form again quite quickly. Lab results show the heating cycle to remove crystals can be repeated on multiple occasions before beginning to suffer from any losses in resin properties. We recommend keeping the resin system at a good room temperature at all times where possible, ensure to clean the lids and bottle necks of containers with isopropyl alcohol / acetone allowing the solvent to evaporate before replacing the lid.Product Data Units Mix Mix Ratio Weight 100 : 50 Hardness ShoreD 80 - 85 Viscosity (25°C) mPa.s 600 - 900 Density (25°C) g/cm3 1.09 – 1.13 Pot life (200g, 25°C) Mins 25 - 30 Cure Time (200g, 25°C) Hours 24 Full Cure (25°C) Days 7 Recommended Casting Thickness mm 1 - 5 -
The Robert Sorby ProEdge takes all the guesswork and effort out of sharpening all your woodworking, woodturning tools. The ProEdge has an abrasive belt which is a quick and efficient method of putting a keen edge on each and every tool. The cool running belt avoids any overheating. The ProEdge comes complete with aluminium oxide and zirconium belts. The ProEdge requires no complex assembly - it can be plugged in and used straight from the box.
-
Out of stock
The buffing mop gives that extra fine edge. -
This hardwearing material is a great choice for profiling and re-profiling damaged tools. The heavier 60 grit option is an efficient choice for removing plenty of material, while the finer 120 grit will provide a satisfying finish. Great longevity and highly practical. -
The cutter holder is a great and inexpensive sharpening accessory. Being double ended it allows the turner to hold comfortably almost every Robert Sorby tool tip without the fear of catching fingers on a sharpening belt or grinding wheel.
-
Applied to a buffing mop the honing paste creates a highly polished finish on any steel. -
The abrasive honing wheel that can be shaped to allow honing of gouge flutes, especially useful for the woodcarver. -
The honing wheel arbor mounts the Honing Wheel to the ProEdge sharpening system. -
The long grind jig helps you create three different fingernail profiles on bowl and spindle gouges. -
Out of stock
The pigtail mandrel is used to mount the Buffing Mop to the ProEdge sharpening system. -
Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset. -
The skew jig is for accurate sharpening of woodturning skew chisels. -
Out of stock
The standard gouge jig allows easy sharpening of all standard ground woodturning gouges. -
This robust material is designed to handle the demands of all steels. Not strictly ‘grit sizes’ these belts are built using brick and pyramid abrasive shaping. The highest 3000 ‘grit’ size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels. -
The woodworking chisel jig accurately ensures a straight cutting edge on any woodworking chisel.
