-
Wire type hose clamp for securing hose to machinery or fittings. For use with matching diameter hose. -
Plastic Bracket for Wall Mounting Hose. For use with 100mm diameter hose, or smaller, the wall hanging bracket will allow you to fix a hose line to the wall or ceiling. Comes complete with fixing screws and raw plugs. -
This handy product allows you to join two other fittings together without having to use hose. i.e. Joining a 100Y Y-Piece onto a 100E Elbow. The sleeve is tapered internally so there is no need for hose clamps. -
Flexible PU (Polyurethane) durable hose with transparent wall and copper coated, high tensile steel wire. Ideal for wood dust and chip extraction. Available by the metre in different diameters. Manufactured in Great Britain! -
4 Piece Stepped Hose Reducer, consists of 4 pieces which can be joined and used as a single reducer or split to give a variety of options. The fittings are all tapered so a millimetre each way should be OK to give decent fit. Can be used to reduce from 100mm diameter hose down to;1 2 3 4 Outside Diameter 68 45 40 35 Inside Diameter 62 40 34 28 -
Replacement paper filter bags for use with Record Power high filtration extractors. -
This tapered quick connector will give a simple push fit onto most 100mm diameter dust extraction outlets. Ideal for moving an extractor between several machines with 100mm outlets. It can be moved from table saw to bandsaw to planer in seconds. The other end of the fitting has a threaded design which screws into the inside of our 100FLEX 100mm diameter hose. 100QC is for 100mm diameter hose only. Please note: The 100QC has a right handed thread and is therefore suitable for right handed hoses as supplied by Charnwood. Other hose manufacturers may use a left hand thread. -
Connecting an extractor to a machine is no longer a struggle with this easy fit cuff on the end of the hose. It glides effortlessly onto any 100 mm outlet. -
Out of stock
Trend AIR PRO Airshield Pro Respirator Kit With 8hr Battery Suitable for use when machining MDF. The Air/Pro has been Approved to new standard BS EN 12941. Battery powered respirator for use with all woodworking applications. New features include: Combination face-seal and hood to improve protection. Motor positioned away from the sensitive area of the forehead to reduce noise and irritation. Strategic component distribution ensure optimum centre of gravity is achieved for balance and comfort. Twin filters with efficiency of 98%, more than double the Airshield MK1. Audible low battery warning. Removable 8 hour Ni-MH battery. -
This plastic connector can be used for stepping up or down in hose sizes. It can also be used for connecting a hose line to machinery with a different sized outlet. -
Six replacement paper motor filter bags for CamVac extraction machines. -
Replacement for the main filter on Record Power high filtration dust extractors. -
A plastic dust collector hood with a wide mouth at one end and a round hose connection at the other. Suitable for use with standard 100mm diameter flexible hose. You may need a hose clamp to secure the hose to the round end (100HC). Ideal for Collecting dust and chips from small lathes, sanding discs or any other machinery which did not originally come supplied with a purpose made dust collection point.
If being used with a multiple branch hose system, a shut off gate (100G) can be attached using a sleeve (100SL) to join the two parts together. A hose can be attached to the other end of the gate and secured with a clamp (100HC).Charnwood DH410 Specification Mouth Opening 410mm x 320mm Hose Connection 100mm Diameter Depth 260mm -
A plastic dust collector hood with a wide mouth at one end and a round hose connection at the other. Suitable for use with standard 100mm diameter flexible hose. You may need a hose clamp to secure the hose to the round end (100HC). Ideal for Collecting dust and chips from small lathes, sanding discs or any other machinery which did not originally come supplied with a purpose made dust collection point.
If being used with a multiple branch hose system, a shut off gate (100G) can be attached using a sleeve (100SL) to join the two parts together. A hose can be attached to the other end of the gate and secured with a clamp (100HC).Charnwood DH250 Specification Mouth Opening 250mm x 110mm Hose Connection 100mm Diameter Depth 230mm -
When more than one hose branch is being used, it is advisable to close off all the inactive lines using these gates to ensure maximum airflow along the active line. These aluminium blast gates are far stronger than the plastic ones and are therefore more suitable to a trade or professional environment. The centre plate simply slides between the open and closed position and can be locked in position. The blast gate has two 100mm (4") connections. Our 100mm hose can be connected directly and secured with a hose clamp, 100HC. Blast gates can be attached directly to a 100mm diameter outlet on a machine using a tapered joining sleeve, 100SL. Gates are also commonly attached to a splitter (T-Branch or Y-Branch) using a tapered joining sleeve. You can mount the gate wherever is the most convenient position. -
Out of stock
Elipse P3 Replacement Filter Kit is a pair of replacement filters for the Elipse P3 half face mask. Surpassing the European standard EN143 by achieved 99.98% filtration at 0.3 micron. It is therefore ideal for woodturners and woodworkers, giving complete protection, even when sanding. Can be used with Elipse models SPR501, SPR502 & Integra SPR406 Made in the UK. -
Manufactured in the UK, the filter is made of EU4 grade, non-woven, thermally bonded polyester fibres. It has a 'G4 arrestance rating of 90%', the filters are very easy to replace. As a general rule-of thumb filters should be regularly checked and replaced every 6-12 months. -
Clear waste bag to fit the CamVac GV286W Compact Wall Mounted Extractor series of machines. -
Out of stock
The Elipse range of respirators are made in Great Britain. The mask body is made from TPE (Thermo Plastic Elastomer) a flexible material which is designed to fit the contours of the face to provide a tight seal. The filter material is known as HESPA (High Efficiency Synthetic Particulate Airfilter). Together they provide absolute protection for woodworkers. The Elipse P3 has the highest classification for a particulate filter. Surpassing the European standard EN143 by achieved 99.98% filtration at 0.3 micron. It is therefore ideal for woodturners and woodworkers, giving complete protection, even when sanding. The twin filter arrangement consists of a light weight half face mask that is comfortable to wear for long periods of time. The low profile filters provide an unobstructed field of vision. Two adjustable elastic straps securely fasten the mask to the wearer. The two strap system allows the wearer to quickly put the mask on and off the face, whilst still wearing it around the neck. Can be worn with glasses ,without causing any steaming, and other PPE safety products including visors and helmets. It is perfect for everyday use by hobby and professional users. Other applications include metalworking, welding and stonemasonry. The Elipse P3 provides protection against dust particles, metal fumes (smoke), asbestos, oil and water mists, vapours, bacteria and viruses. Replacement filters are easily fitted. -
When more than one hose line has been set up, it is advisable to close off all the inactive lines using these gates to ensure maximum airflow along the active line. Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm hose only. -
Y-Branch: To split a hose line into two branches when creating multiple connections. Three hose clamps are required to fasten the hoses securely. 100Y for use with 100mm hose only -
Planet Full Face Visor is ideally suited for woodturners and DIYers. It protects your eyes and face from woodshavings, dust, and low energy objects. Simply tighten the adjuster on the headband to get the best fit. Spare visors are also available (FV424V). The optical class Lens visor is made from clear acetate. It measure 320 x 190 mm with a nominal thickness of 1.15 mm. The visor is anti-fog (N). Recommended for protection from impact by low-energy, high-velocity particles. Full Face Yellow Visor Complete: FV424/SS/Y Visor Only: FV424V Yellow Browguard Only: FV424YV -
100 to 57 mm reducer, for use with bench machines or power tools. -
Y connector for use in 100 mm diameter workshop dust extraction systems to reduce down to 63 mm. 100 x 100 x 63 mm. -
Self supporting extraction port and hose, ideal for woodturning, 660mm in length. This is an official LOC-LINE® product, the original and best modular hose. Suitable for 2.5" systems. -
T shaped branch: To split a hose line into two branches when creating multiple connections. Sometimes the T shape is an advantage when creating a hose network, however the airflow is not as efficient as with the Y shaped branch. -
Joining splice used to join two lengths of 100mm diameter hose together, for example when a run of over 10 metres in length is required. Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm diameter hose only. -
2.5 metres of flexible hose for use with 2.5" diameter systems. -
This extremely flexible dual-purpose adaptor can be used either as a stepped power tool adaptor or to create a bespoke dust extraction port. If the dust producing machine has no extraction port, this adaptor can be attached using the four screw holes in the flange, allowing a suitable hose to be connected to it. The adaptor can also be used to connect directly to a 2.5" diameter extraction system and the stepped profile be adjusted to suit the port of the power tool. -
- Respiratory protection to BS EN12941:1999 to cover all dusts generated when working in hard and softwoods, ply, MDF and other timber-based materials.
- Simple to swap over, the filters ensure you are always guaranteed full protection from harmful dusts.
- Filter efficiency 98% with a minimum laboratory protection factor of 50.
- Filters allow clean, unrestricted airflow as you work for maximum comfort and work efficiency.
