-
Planet Full Face Visor is ideally suited for woodturners and DIYers. It protects your eyes and face from woodshavings, dust, and low energy objects. Simply tighten the adjuster on the headband to get the best fit. Spare visors are also available (FV424V). The optical class Lens visor is made from clear acetate. It measure 320 x 190 mm with a nominal thickness of 1.15 mm. The visor is anti-fog (N). Recommended for protection from impact by low-energy, high-velocity particles. Full Face Yellow Visor Complete: FV424/SS/Y Visor Only: FV424V Yellow Browguard Only: FV424YV -
Sale!
The best looking single stage dust collector to hit the market in years. Sleek design and power to match. No more fumbling with a steel band to mount your lower bag, the bflux comes with a patented Snap-Band that makes changing the bag a breeze. Unlike most 1HP units the bflux feels solid & has a low dB rating. The horizontal dust chute provides optimum airflow & can swivel 180 degree to make the 4 inch outlet face downwards. -
Eye protection to EN166, 167, 168. (Medium protection against high speed particles) -
- Respiratory protection to BS EN12941:1999 to cover all dusts generated when working in hard and softwoods, ply, MDF and other timber-based materials.
- Simple to swap over, the filters ensure you are always guaranteed full protection from harmful dusts.
- Filter efficiency 98% with a minimum laboratory protection factor of 50.
- Filters allow clean, unrestricted airflow as you work for maximum comfort and work efficiency.
-
Replacement paper filter bags for use with Record Power high filtration extractors. -
Manufactured in the UK, the filter is made of EU4 grade, non-woven, thermally bonded polyester fibres. It has a 'G4 arrestance rating of 90%', the filters are very easy to replace. As a general rule-of thumb filters should be regularly checked and replaced every 6-12 months. -
This compact 36 litre machine is ideal for general maintenance in smaller premises and workshops. In addition to wood dust and chippings, it can tackle workshop debris, nails, and many other types of waste with ease and features the CamVac triple filtration system for effective treatment of fine particles. The cyclonic neutral vane theory technology draws the waste into the drum with great force and directs it around the outside edge, keeping the filters cleaner and allowing the waste to fall to the bottom of the drum.The lid features an acoustic outlet for the motor - When the optional hose is fitted, the sound of the motor can be directed away from the machine, greatly reducing noise in the workshop.Now includes ZAMV 2 Metres of 100 mm Dust Extraction Hose and DX100X Easy-Fit Cuff -
Designed to fit all of the CamVac CGV286 Compact Extractors and CGV336 Medium Extractors, this high quality caster set allows easy transportation of the machine around the workshop. -
Six replacement paper motor filter bags for CamVac extraction machines. -
Clear waste bag to fit the CamVac GV286W Compact Wall Mounted Extractor series of machines. -
Flexible PU (Polyurethane) durable hose with transparent wall and copper coated, high tensile steel wire. Ideal for wood dust and chip extraction. Available by the metre in different diameters. Manufactured in Great Britain! -
Wire type hose clamp for securing hose to machinery or fittings. For use with matching diameter hose. -
Joining splice used to join two lengths of 100mm diameter hose together, for example when a run of over 10 metres in length is required. Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm diameter hose only. -
This handy product allows you to join two other fittings together without having to use hose. i.e. Joining a 100Y Y-Piece onto a 100E Elbow. The sleeve is tapered internally so there is no need for hose clamps. -
When running hose around the workshop, it is sometimes easier to use an elbow at the corners rather than run the flexible hose around. Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm diameter hose only. -
Y-Branch: To split a hose line into two branches when creating multiple connections. Three hose clamps are required to fasten the hoses securely. 100Y for use with 100mm hose only -
T shaped branch: To split a hose line into two branches when creating multiple connections. Sometimes the T shape is an advantage when creating a hose network, however the airflow is not as efficient as with the Y shaped branch. -
When more than one hose branch is being used, it is advisable to close off all the inactive lines using these gates to ensure maximum airflow along the active line. These aluminium blast gates are far stronger than the plastic ones and are therefore more suitable to a trade or professional environment. The centre plate simply slides between the open and closed position and can be locked in position. The blast gate has two 100mm (4") connections. Our 100mm hose can be connected directly and secured with a hose clamp, 100HC. Blast gates can be attached directly to a 100mm diameter outlet on a machine using a tapered joining sleeve, 100SL. Gates are also commonly attached to a splitter (T-Branch or Y-Branch) using a tapered joining sleeve. You can mount the gate wherever is the most convenient position. -
Plastic Bracket for Wall Mounting Hose. For use with 100mm diameter hose, or smaller, the wall hanging bracket will allow you to fix a hose line to the wall or ceiling. Comes complete with fixing screws and raw plugs. -
Connecting an extractor to a machine is no longer a struggle with this easy fit cuff on the end of the hose. It glides effortlessly onto any 100 mm outlet. -
Y connector for use in 100 mm diameter workshop dust extraction systems to reduce down to 63 mm. 100 x 100 x 63 mm. -
100 to 57 mm reducer, for use with bench machines or power tools. -
Out of stock
A plastic dust collector hood with a wide mouth at one end and a round hose connection at the other. Suitable for use with standard 100mm diameter flexible hose. You may need a hose clamp to secure the hose to the round end (100HC). Ideal for Collecting dust and chips from small lathes, sanding discs or any other machinery which did not originally come supplied with a purpose made dust collection point.
If being used with a multiple branch hose system, a shut off gate (100G) can be attached using a sleeve (100SL) to join the two parts together. A hose can be attached to the other end of the gate and secured with a clamp (100HC).Charnwood DH410 Specification Mouth Opening 410mm x 320mm Hose Connection 100mm Diameter Depth 260mm -
Out of stock
A plastic dust collector hood with a wide mouth at one end and a round hose connection at the other. Suitable for use with standard 100mm diameter flexible hose. You may need a hose clamp to secure the hose to the round end (100HC). Ideal for Collecting dust and chips from small lathes, sanding discs or any other machinery which did not originally come supplied with a purpose made dust collection point.
If being used with a multiple branch hose system, a shut off gate (100G) can be attached using a sleeve (100SL) to join the two parts together. A hose can be attached to the other end of the gate and secured with a clamp (100HC).Charnwood DH250 Specification Mouth Opening 250mm x 110mm Hose Connection 100mm Diameter Depth 230mm -
4 Piece Stepped Hose Reducer, consists of 4 pieces which can be joined and used as a single reducer or split to give a variety of options. The fittings are all tapered so a millimetre each way should be OK to give decent fit. Can be used to reduce from 100mm diameter hose down to;1 2 3 4 Outside Diameter 68 45 40 35 Inside Diameter 62 40 34 28 -
This plastic connector can be used for stepping up or down in hose sizes. It can also be used for connecting a hose line to machinery with a different sized outlet. -
2.5 metres of flexible hose for use with 2.5" diameter systems. -
Self supporting extraction port and hose, ideal for woodturning, 660mm in length. This is an official LOC-LINE® product, the original and best modular hose. Suitable for 2.5" systems. -
This extremely flexible dual-purpose adaptor can be used either as a stepped power tool adaptor or to create a bespoke dust extraction port. If the dust producing machine has no extraction port, this adaptor can be attached using the four screw holes in the flange, allowing a suitable hose to be connected to it. The adaptor can also be used to connect directly to a 2.5" diameter extraction system and the stepped profile be adjusted to suit the port of the power tool.
