-
Wire type hose clamp for securing hose to machinery or fittings. For use with matching diameter hose. -
Plastic Bracket for Wall Mounting Hose. For use with 100mm diameter hose, or smaller, the wall hanging bracket will allow you to fix a hose line to the wall or ceiling. Comes complete with fixing screws and raw plugs. -
This handy product allows you to join two other fittings together without having to use hose. i.e. Joining a 100Y Y-Piece onto a 100E Elbow. The sleeve is tapered internally so there is no need for hose clamps. -
Flexible PU (Polyurethane) durable hose with transparent wall and copper coated, high tensile steel wire. Ideal for wood dust and chip extraction. Available by the metre in different diameters. Manufactured in Great Britain! -
4 Piece Stepped Hose Reducer, consists of 4 pieces which can be joined and used as a single reducer or split to give a variety of options. The fittings are all tapered so a millimetre each way should be OK to give decent fit. Can be used to reduce from 100mm diameter hose down to;1 2 3 4 Outside Diameter 68 45 40 35 Inside Diameter 62 40 34 28 -
Replacement paper filter bags for use with Record Power high filtration extractors. -
This tapered quick connector will give a simple push fit onto most 100mm diameter dust extraction outlets. Ideal for moving an extractor between several machines with 100mm outlets. It can be moved from table saw to bandsaw to planer in seconds. The other end of the fitting has a threaded design which screws into the inside of our 100FLEX 100mm diameter hose. 100QC is for 100mm diameter hose only. Please note: The 100QC has a right handed thread and is therefore suitable for right handed hoses as supplied by Charnwood. Other hose manufacturers may use a left hand thread. -
Connecting an extractor to a machine is no longer a struggle with this easy fit cuff on the end of the hose. It glides effortlessly onto any 100 mm outlet. -
This plastic connector can be used for stepping up or down in hose sizes. It can also be used for connecting a hose line to machinery with a different sized outlet. -
Six replacement paper motor filter bags for CamVac extraction machines. -
Replacement for the main filter on Record Power high filtration dust extractors. -
A plastic dust collector hood with a wide mouth at one end and a round hose connection at the other. Suitable for use with standard 100mm diameter flexible hose. You may need a hose clamp to secure the hose to the round end (100HC). Ideal for Collecting dust and chips from small lathes, sanding discs or any other machinery which did not originally come supplied with a purpose made dust collection point.
If being used with a multiple branch hose system, a shut off gate (100G) can be attached using a sleeve (100SL) to join the two parts together. A hose can be attached to the other end of the gate and secured with a clamp (100HC).Charnwood DH410 Specification Mouth Opening 410mm x 320mm Hose Connection 100mm Diameter Depth 260mm -
A plastic dust collector hood with a wide mouth at one end and a round hose connection at the other. Suitable for use with standard 100mm diameter flexible hose. You may need a hose clamp to secure the hose to the round end (100HC). Ideal for Collecting dust and chips from small lathes, sanding discs or any other machinery which did not originally come supplied with a purpose made dust collection point.
If being used with a multiple branch hose system, a shut off gate (100G) can be attached using a sleeve (100SL) to join the two parts together. A hose can be attached to the other end of the gate and secured with a clamp (100HC).Charnwood DH250 Specification Mouth Opening 250mm x 110mm Hose Connection 100mm Diameter Depth 230mm -
When more than one hose branch is being used, it is advisable to close off all the inactive lines using these gates to ensure maximum airflow along the active line. These aluminium blast gates are far stronger than the plastic ones and are therefore more suitable to a trade or professional environment. The centre plate simply slides between the open and closed position and can be locked in position. The blast gate has two 100mm (4") connections. Our 100mm hose can be connected directly and secured with a hose clamp, 100HC. Blast gates can be attached directly to a 100mm diameter outlet on a machine using a tapered joining sleeve, 100SL. Gates are also commonly attached to a splitter (T-Branch or Y-Branch) using a tapered joining sleeve. You can mount the gate wherever is the most convenient position. -
Manufactured in the UK, the filter is made of EU4 grade, non-woven, thermally bonded polyester fibres. It has a 'G4 arrestance rating of 90%', the filters are very easy to replace. As a general rule-of thumb filters should be regularly checked and replaced every 6-12 months. -
Clear waste bag to fit the CamVac GV286W Compact Wall Mounted Extractor series of machines. -
When more than one hose line has been set up, it is advisable to close off all the inactive lines using these gates to ensure maximum airflow along the active line. Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm hose only. -
Y-Branch: To split a hose line into two branches when creating multiple connections. Three hose clamps are required to fasten the hoses securely. 100Y for use with 100mm hose only -
100 to 57 mm reducer, for use with bench machines or power tools. -
Y connector for use in 100 mm diameter workshop dust extraction systems to reduce down to 63 mm. 100 x 100 x 63 mm. -
Self supporting extraction port and hose, ideal for woodturning, 660mm in length. This is an official LOC-LINE® product, the original and best modular hose. Suitable for 2.5" systems. -
T shaped branch: To split a hose line into two branches when creating multiple connections. Sometimes the T shape is an advantage when creating a hose network, however the airflow is not as efficient as with the Y shaped branch. -
Joining splice used to join two lengths of 100mm diameter hose together, for example when a run of over 10 metres in length is required. Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm diameter hose only. -
2.5 metres of flexible hose for use with 2.5" diameter systems. -
This extremely flexible dual-purpose adaptor can be used either as a stepped power tool adaptor or to create a bespoke dust extraction port. If the dust producing machine has no extraction port, this adaptor can be attached using the four screw holes in the flange, allowing a suitable hose to be connected to it. The adaptor can also be used to connect directly to a 2.5" diameter extraction system and the stepped profile be adjusted to suit the port of the power tool. -
When running hose around the workshop, it is sometimes easier to use an elbow at the corners rather than run the flexible hose around. Two 100mm hose clamps are required to fasten the hoses securely. For use with 100mm diameter hose only. -
Sale!
This new air filter features two stage filtration with pocket filters to provide filtration down to 1 micron. It has 3 speeds and a timer function so you can leave the unit to run for a period after you have finished in the workshop. Both of which can be applied by remote control, which is included with the machine. Also supplied with mounting hooks and chains.
-
Out of stock
The CGV336 offers an impressive 55 litre capacity whilst also being very compact. In addition to wood dust and chippings, it can tackle workshop debris, nails, and many other types of waste with ease and features the CamVac triple filtration system for effective treatment of fine particles. The cyclonic neutral vane theory technology draws the waste into the drum with great force and directs it around the outside edge, keeping the filters cleaner and allowing the waste to fall to the bottom of the drum.The lid features an acoustic outlet for the motor - When the optional hose is fitted, the sound of the motor can be directed away from the machine, greatly reducing noise in the workshop.Now includes ZAMV 2 Metres of 100 mm Dust Extraction Hose and DX100X Easy-Fit Cuff -
Replacement cloth drum filter bag for the CamVac GV386 Large Extractor series of machines.
