-
Out of stock
Crowns heavy duty Scrapers 1 1/2" 38mm x 3/8" 10mm help keep vibration to a minimum. -
Out of stock
Basswood is an ideal wood for woodcarvers and whittling. Its soft, fine, even texture makes it easy to work with, while its pale inconspicuous colour doesn't distract from the carved patterns of the finished product. It can take stain and polishes without difficulty. -
No more ground finger ends, just bolt on your turnmaster tips to aid with sharpening. -
6mm hook and straight mini carbide set. Excellent carbide tools for boxes and small hollow forms. Bars are made from stainless steel for strength. The hook is forged to shape with the cutter tipped slightly downwards for easy controlled cutting. Max depth is recommended as no more than 5-6" deep for this set. -
The Sovereign Extension is a useful addition to the range of accessories. Custom-made during the development of the new Sovereign sets. This 4" extension adds length to any Sovereign handle. NOTE: a threaded coupler is required. -
Holds tips and cutters securely allowing easy sharpening of small and difficult to grasp attachments. -
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Perfect for the smaller piece. Related Products: This cutter is designed for use with the following tools:-
- Midi Multi-tip Hollowing Tool (RS100KT and RS100)
-
-
Sovereign Collet - pilot bored -
Sovereign Threaded Coupler, this handy accessory allows the turner to easily customise handle length. Use to join handles together. -
Sharpening: Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.2 -0.4 microns Hardness: 62 RC Material: M2 HSS Related Products: These cutters are designed specifically for the TurnMaster -
Related Products: This cutter is designed for use with the following tools: Midi Multi-tip Hollowing System (RS100KT, RS100) RS2000 Deep Hollowing System The Robert Sorby small tear drop cutter provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of small bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports traditional scraping and shear scraping techniques. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. -
The round is a general purpose cutter for the rapid removal of material inside and outside bowls and hollow forms. It works equally efficiently on spindle work. The detail point offers an excellent choice for roughing down square stock to round and for creating fine detail, while the square is useful for generating square shoulders on tenons. It is also excellent for spindle work. Both the square and round cutters deliver an extremely fine finish that requires little or no sanding when the TurnMaster is switched to shear scraping mode. Manufactured with the highest quality micro grade tungsten carbide these cutters will provide incredible durability and endurance. Sharpening: Use a diamond file or diamond plate flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a diamond belt or on a grinding wheel using diamond or other high density abrasive material. Sharpens to: 0.7 microns Hardness: 90 RC Material: micro grade tungsten carbide Related Products: These cutters are designed specifically for the TurnMaster -
Related Products: These cutters are designed for use with the following tools: Medium tear-drop scraper (RS200C) to suit Multi-tip Hollowing System (RS200KT, RS200) Large tear-drop scraper(RS213C) to suit RS2000 Deep Hollowing System The Robert Sorby medium tear drop cutter, like its big brother (Large Teardrop RS213C) provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports traditional scraping and shear scraping techniques. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the 472 cutter holder to reshape the profile on the Robert Sorby ProEdge or on a grinding wheel. -
The Splay tool can be used as a skew chisel, a box scraper, a shear scraper and also for detail work on spindles. -
Sale!
Another 'Crown' special, the Wedge tool is 'user friendly'. Superb for making coves on spindle work and finish cuts on both faceplate and spindle projects. It also provides a smooth finish when making goblets. A recent innovation, the Splay Tool can be used as a Skew Chisel, a Box Scraper, a Shear Scraper and also for detail work on spindles. -
Sale!
Designed in conjunction with the professional British woodturner, Albert Harrison, this tool is excellent for cleaning out small boxes and goblets, giving an extremely clean finish. -
Crown Spindle Gouges are their range of milled regular English gouges, are available in their range to suit all requirements for Spindle work. -
Record Power Spindle Gouges these are ideal general-purpose spindle tools, ideal for producing beads, coves and sweeping profiles across a wide range of projects. -
These tools are made specifically for producing rings that are captured by the workpiece and feature a double bevel which results in only one tool being necessary to complete a ring. -
Out of stock
The slim blade allows for a very fine parted section to be achieved. This is especially useful when grain match after parting is required. e.g. parting a lid from its box. The blade is 1¼" deep giving strength to such a thin section which eliminates flex and vibration. -
Crown Round Nose Scrapers are perfect for achieving a smooth finish after shaping has been completed by other tools. -
Crown Square End Scrapers are ideal for finishing both flat bottomed and convex projects. The square blade can also be shaped by the user to suit their own requirements. -
Crown Parting Tools are a range of parting tools to suit all projects. -
Crown Standard Skews are part of the range of skew chisels that are one of the most comprehensive available worldwide. -
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed. Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle sticks and other spindle projects. -
Crown Beading & Parting Tool form part of the range of parting tools to suit all projects.
-
Crown's H.S.S. Shallow flute 'Detail' Gouges are ideal for cutting coves and beads. The shallow flute permits a smoother cut and gives less vibrations due to more metal being under the flute. -
Used on bowls and platters to create smooth flowing curves.
-
Record Power Domed Scrapers (round-nose scrapers) feature a left-hand sweep to the grind, which allows them to be used on the insides of bowls with ease. Ideal for removing gouge marks and general smoothing work. -
Specially developed to allow the blade to move more easily along the tool rest than normal rectangular shaped chisels. -
Recognised as being amongst the best available worldwide, Crown Bowl Gouges have the edge and balance needed for the finest projects. -
Record Power Parting Tools mainly used for parting the finished workpiece from the waste wood. With the correct technique they can also be used for creating beads and patterns - a truly useful and essential tool. -
Crown 3/4" Side Cutting Scrapers are designed specifically for finishing bottoms of bowls and boxes.
-
Crown 3/16" Fluted Parting Tool (5mm) is part of the range of parting tools to suit all projects.
-
These are detailing tools used on between-centre work, where the grain is running parallel to the bed bars.They are used to create coves, beads and other profiles on goblets, vases and egg cups. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Record Power Skew Chisels probably the most versatile tool for working between centres - they can give a silky smooth finish and may also be used for creating beads, coves and other decorative elements. -
Crown Diamond Parting Tools are a range of parting tools to suit all projects. -
Out of stock
For anyone turning salt and pepper mills using a CrushGrind mechanism, this is an essential tool in obtaining the correct depth and size of recesses needed to enable the mechanism to work correctly. The step or shoulder of the tool gives an accurate position of the recess required for the base section of the mill. The small V notch on the right hand side allows the other groove to be produced in the top section when it is lined up with the outer face. The CrushGrind tool will give accurate and effortless results time and again. -
A special calliper (ref 973) which makes dimensioning threaded or push fitments that much easier. -
Record Power Bowl Gouges feature an improved flute profile, designed to help clear shavings quickly for more effective and faster cutting. -
Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The ⅛" – 3mm tool reduces the amount of waste, vital if using an expensive wood. It also makes for a fine detailing tool, e.g. beads and fillets. -
Crown Forged Spindle Gouges range of European style are tools in their range to suit all requirements for Spindle work.
-
Delicately balanced tools that are the planes of the spindle turners tool kit. Originally designed at Robert Sorby, the profile allows the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest. They will smooth cylinders, clean the end grain of spindles, cut shallow curves, beads, pummels and v-cuts, e.g. stair balustrading and chair legs. These tools are indispensable if a fine finish is required from the tool. -
When making CrushGrind peppermills it is necessary to create an accurate recess within the mill body, into which the mechanism clips, retaining it in place. This tool from manufactured from High Speed Steel, is specifically designed to cut a suitable recess.
-
Crown roughing out gouges are traditionally made hot forged gouges are ground and finished by hand. The ideal tools for preliminary work to produce a round shape from square edge spindle stock.
-
A must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary. -
Record Power Spindle Roughing Gouges designed for use between lathe centres on parallel grain, the deep and wide flutes of these gouges remove material with speed. Ideal for roughing out spindle blanks but they can also be useful for some finer work. -
A must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary. -
These unique tools developed by the well respected North American woodturner, Dave Hout, are used for making finished cuts when producing bowls. The cut is shear and leaves the end grain smooth. With practice, sanding can be all but eliminated. The two tool set consists of one tool with a deeper flute to be used on bowls up to 5" -6" in diameter. The shallower tool is for use on bowls 6" and larger in diameter. -
The ideal beginners set. These small carving tools, made from high quality hardened and tempered Carbon steel, are fitted with stained Beech handles. The ready honed blades feature 5/16" 8mm Square Chisel, 5/16" 8mm Bent Square Chisel, 5/16" 8mm Skew Chisel, 3/16" 5mm Straight Gouge, 5/16" 8mm Bent Gouge and 3/16" 5mm Bent 'V' tool. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Crown 1" x 3/8" Heavy Duty Scrapers help to keep vibration to a minimum.
-
Out of stock
Crown Hand Tools Miniature Spiralling system, complete with a 17 and a 27 tooth wheel.
-
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
The Hardwood Scraper is different in that it has a negative rake on the bevel. It is designed to reduce or eliminate tear-out of the fibres of wood leaving a highly polished surface on all types of wood. This feature is particularly highly sought after by those working in the typically hard woods like African Blackwood. Musical instrument makers find the Hardwood Scraper a particularly useful addition to their collection of lathe tools. It is equally effective on spindle and faceplate work.
