-
Related Products: These cutters are designed for use with the following tools: Medium tear-drop scraper (RS200C) to suit Multi-tip Hollowing System (RS200KT, RS200) Large tear-drop scraper(RS213C) to suit RS2000 Deep Hollowing System The Robert Sorby medium tear drop cutter, like its big brother (Large Teardrop RS213C) provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports traditional scraping and shear scraping techniques. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the 472 cutter holder to reshape the profile on the Robert Sorby ProEdge or on a grinding wheel. -
The slim blade allows for a very fine parted section to be achieved. This is especially useful when grain match after parting is required. e.g. parting a lid from its box. The blade is 1¼" deep giving strength to such a thin section which eliminates flex and vibration. -
Related Products: This cutter is designed for use with the following tools: Midi Multi-tip Hollowing System (RS100KT, RS100) RS2000 Deep Hollowing System The Robert Sorby small tear drop cutter provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of small bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports traditional scraping and shear scraping techniques. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. -
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Perfect for the smaller piece. Related Products: This cutter is designed for use with the following tools:-
- Midi Multi-tip Hollowing Tool (RS100KT and RS100)
-
-
M42 Razor Edge 3/16" Diamond Parting Tool combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
The Sovereign Extension is a useful addition to the range of accessories. Custom-made during the development of the new Sovereign sets. This 4" extension adds length to any Sovereign handle. NOTE: a threaded coupler is required. -
A must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary. -
Out of stock
This 18" tool can produce either massive profiling cuts or delicate finishing cuts as necessary, -
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed. Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle sticks and other spindle projects. -
Used on bowls and platters to create smooth flowing curves. -
Providing choice and flexibility in one easy to handle tool. The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system. Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way they work. Designed to quickly and easily complete many popular projects, the TurnMaster has been a huge success with both novices and experienced turners. Its unprecedented collection of parts and cutters making it the most versatile and value added single tool concept on the market today. -
Providing choice and flexibility in one easy to handle tool. The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system. Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way they work. Designed to quickly and easily complete many popular projects, the TurnMaster has been a huge success with both novices and experienced turners. Its unprecedented collection of parts and cutters making it the most versatile and value added single tool concept on the market today. -
The round is a general purpose cutter for the rapid removal of material inside and outside bowls and hollow forms. It works equally efficiently on spindle work. The detail point offers an excellent choice for roughing down square stock to round and for creating fine detail, while the square is useful for generating square shoulders on tenons. It is also excellent for spindle work. Both the square and round cutters deliver an extremely fine finish that requires little or no sanding when the TurnMaster is switched to shear scraping mode. Manufactured with the highest quality micro grade tungsten carbide these cutters will provide incredible durability and endurance. Sharpening: Use a diamond file or diamond plate flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a diamond belt or on a grinding wheel using diamond or other high density abrasive material. Sharpens to: 0.7 microns Hardness: 90 RC Material: micro grade tungsten carbide Related Products: These cutters are designed specifically for the TurnMaster -
Sharpening: Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.2 -0.4 microns Hardness: 62 RC Material: M2 HSS Related Products: These cutters are designed specifically for the TurnMaster -
No more ground finger ends, just bolt on your turnmaster tips to aid with sharpening. -
Holds tips and cutters securely allowing easy sharpening of small and difficult to grasp attachments. -
This set contains the three essential tools for spindle turning - 1” spindle roughing gouge, 3/8” spindle gouge and 1/8” parting tool.These tools are manufactured to a standard that makes them perfect for use by demanding professionals but also at a cost which makes them ideal for the novice turner. Designed in consultation with and tested rigorously by professional woodturners, they represent a new standard in quality and value.The blades are made of high speed steel to keep their cutting edge longer and the handles of close-grained, stable and heavy beech. The shape of the handles has been specially designed, based on the requirements of experienced woodturners, to provide a strong and comfortable grip, leaving you free to concentrate on turning. -
This set contains the three essential tools for bowl turning - 3/8” bowl gouge, 1/2” domed scraper and 3/16” parting tool.These tools are manufactured to a standard that makes them perfect for use by demanding professionals but also at a cost which makes them ideal for the novice turner. Designed in consultation with and tested rigorously by professional woodturners, they represent a new standard in quality and value.The blades are made of high speed steel to keep their cutting edge longer and the handles of close-grained, stable and heavy beech. The shape of the handles has been specially designed, based on the requirements of experienced woodturners, to provide a strong and comfortable grip, leaving you free to concentrate on turning. -
The Round Carbide cutter turning tool has a circular cutting tip, 15mm in diameter. The profile makes it ideal for cutting coves in spindle work. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
The Square Tip tool features a 15mm square cutting tip, each side having a very slight radius. It can remove quite a lot of material quickly. On the other hand it is more than capable of delicate refining cuts, flat or at a shear angle. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
The Diamond Point cutter has 15mm long edges, perfect for fine detailing, deep vee cuts, and the side edges can refine convex curves. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
Record Power Domed Scrapers (round-nose scrapers) feature a left-hand sweep to the grind, which allows them to be used on the insides of bowls with ease. Ideal for removing gouge marks and general smoothing work. -
Record Power Bowl Gouges feature an improved flute profile, designed to help clear shavings quickly for more effective and faster cutting. -
Record Power Parting Tools mainly used for parting the finished workpiece from the waste wood. With the correct technique they can also be used for creating beads and patterns - a truly useful and essential tool. -
Record Power Skew Chisels probably the most versatile tool for working between centres - they can give a silky smooth finish and may also be used for creating beads, coves and other decorative elements. -
Record Power Spindle Gouges these are ideal general-purpose spindle tools, ideal for producing beads, coves and sweeping profiles across a wide range of projects. -
Record Power Spindle Roughing Gouges designed for use between lathe centres on parallel grain, the deep and wide flutes of these gouges remove material with speed. Ideal for roughing out spindle blanks but they can also be useful for some finer work. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
6mm hook and straight mini carbide set. Excellent carbide tools for boxes and small hollow forms. Bars are made from stainless steel for strength. The hook is forged to shape with the cutter tipped slightly downwards for easy controlled cutting. Max depth is recommended as no more than 5-6" deep for this set. -
6mm hook and straight mini carbide set. Excellent carbide tools for boxes and small hollow forms. Bars are made from stainless steel for strength. The hook is forged to shape with the cutter tipped slightly downwards for easy controlled cutting. Max depth is recommended as no more than 5-6" deep for this set.
