-
Re-chucking bowls and platters for finishing or light shaping has always been something woodturners want to solve. The longworth style chuck makes it easy. This self-centring scroll operation quickly adjusts to fit the work and tightening only takes a few seconds. Designed for clamping in a traditional 4 jaw-self-centring chuck using standard 50mm dovetail jaws. It eliminates the time and hassle of removing and remounting chuck jaws needed when using regular re-chucking jaws. Non-Marking premium silicone grippers provide pliable yet firm gripping power Precision cut, plates provide ultimate performance and reliability 600 RPM maximum. Chuck size indicates the minimum lathe swing for which it is intended maximum external gripping capacity is approximately smaller than chuck diameter.
-
Record Power's powerful work lamp is a perfect addition to any workshop. The long flexible neck allows it to be positioned to illuminate even the most hard-to-reach areas and get rid of troublesome shadows, giving a clear view of the work in progress. To further increase the lamp’s flexibility, a sliding collar on the lamp head allows either a spotlight or floodlight beam to be created. The strong magnetic base and magnetic side clip mean the light can be secured virtually anywhere on a machine. Powered by either standard AA batteries or a USB rechargeable lithium battery, this lamp gives hours of uninterrupted use and is ideal for a wide variety of machines such as scroll saws, bandsaws, sharpening machines, lathes and many more.Includes:• Magnetic base• Magnetic side clip• AA and Lithium battery holders• Micro USB-A cable
-
With 28 LED bulbs mains powered, Charnwood's magnetic base light is ideal for any situation where better lighting is required. The flexible arm is 370mm long and is fixed onto a magnetic base that can be turned on and off allowing the LED light to be securely attached to any steel or cast iron base. With 28 LED lights it produces better light than many with the added advantage of emitting very little heat. There is a seperate on / off switch for the LED light and it runs off a standard 240v, 13amp socket and comes complete with a 1.2m cable. Ideal for use with;
- Bandsaws
- Lathes
- Pillar drills
- Scroll Saws
- Underpinners
Specification
Number of LEDs 28 Brightness 180 Lumens Shaft Length 370mm Weight 1.4kg Rating Trade Warranty 1 Year -
These extended jaws act like a pin chuck, expanding into a pre-bored hole. A useful technique for free form edge bowls as you don't have to bore an exact size as with other pin jaws. The longer jaws allow for a very powerful spigot grip for smaller work. Also features a small dovetail. Expansion 26 - 46mm Contraction square: 28 - 7mm Contraction spigot 31 - 10mm
-
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 10 TPI
-
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 15 TPI.
-
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 20 TPI.
-
Out of stockFeaturing a spiral twist, these plain end HSS blades can cut in any direction without the need to turn the workpiece. This is particularly useful for projects that are too big for the throat depth of the scroll saw. They also allow for pieces to be cut with the bevel running in the same direction all round. 0.8 mm wide, 0.34 mm thick, 40 TPI.
-
The Robert Sorby ProEdge takes all the guesswork and effort out of sharpening all your woodworking, woodturning tools. The ProEdge has an abrasive belt which is a quick and efficient method of putting a keen edge on each and every tool. The cool running belt avoids any overheating. The ProEdge comes complete with aluminium oxide and zirconium belts. The ProEdge requires no complex assembly - it can be plugged in and used straight from the box.
-
Out of stockThe buffing mop gives that extra fine edge.
-
Out of stockThe pigtail mandrel is used to mount the Buffing Mop to the ProEdge sharpening system.
-
Out of stockThe standard gouge jig allows easy sharpening of all standard ground woodturning gouges.
-
This robust material is designed to handle the demands of all steels. Not strictly ‘grit sizes’ these belts are built using brick and pyramid abrasive shaping. The highest 3000 ‘grit’ size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels.
-
Featuring a specialised dovetail profile, these jaws are ideal for turning large bowls, green timber and hollow vessels. They combine the profile of our previously popular 100 mm dovetail jaws with a deep body and internal teeth to improve versatility. The outer dovetail jaws are ideal for large bowls or platters, particularly when gripping onto a spigot and the deep internal toothed body is ideal for large spigots of large hollow vessels. Expansion: 94 - 114 mm Contraction Spigot: 76 - 95 mm Contraction Square: 54 - 74 mm
-
This faceplate ring is ideal for holding medium sized bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 50 mm jaw set which comes complete with all Record Power chuck packages. Must be used with: 62313 50 mm Standard Jaws (Supplied with SC3 and SC4 chucks) Diameter: 87 mm
-
These jaws are a smaller version of the standard 50 mm jaws, featuring the same dovetail profile in expansion and the superb grip of the hawk beak design on contraction. Designed specifically for smaller spigots and recesses, this set is incredibly versatile and makes a great addition to any turner’s tool collection. Expansion: 38 - 58 mm Contraction Spigot: 28 - 47 mm Contraction Square: 16 - 37 mm
-
This large faceplate ring is ideal for holding large bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 50 mm jaw set which comes complete with all Record Power chuck packages. Must be used with: 62313 50 mm Standard Jaws (Supplied with SC3 and SC4 chucks) Diameter: 100 mm