-
The Record Sabre-300 12" Bandsaw is the latest cutting-edge machine introduced into the market-leading Record Power SABRE series of bandsaws. Designed and developed with the keen hobbyist woodworker in mind, the SABRE-300 embodies the next step in the evolution of our flagship bandsaw range, offering a high-quality and extremely versatile machine, at a size suitable for most workshops. With a multitude of innovative features, substantial power and capacity, the SABRE-300 is the ideal machine for handling a wide variety of tasks, ranging from intricate small-scale items to larger, heavier workpieces, making it the ultimate multi-purpose bandsaw. The advantageous rip fence micro-adjustment feature enables extremely accurate positioning, helping users to achieve the desired position quickly and easily. The premium-grade sliding block blade guides provide extensive blade support, which helps to minimise vibration and enhances both stability and control. The blade guides are made from premium O1 tool steel, which has been selected for its exceptional ability to dissipate heat far more efficiently than ceramic alternatives. Adjustment of the blade guides is completely tool-free and can be carried out quickly and easily, using the accurate adjustment and locking handles. The SABRE-300 takes harmful wood dust protection to the next level, with the combination of side and rear dust extraction ports. The rear dust port features a CamVac bayonet fitting, allowing direct connectivity with the Record Power range of CamVac high-filtration dust extractors. The side dust port seamlessly pairs with the Record Power 2.5" flexible hose, streamlining the dust extraction setup. A removable dust cap situated within the lower cabinet over the blade, further reduces airflow leakage, increasing extraction efficiency. -
The central locating pin of the drive centre retracts into its body when pressure is applied from the lathe tailstock, leaving the ring of teeth around the circumference to hold the workpiece extremely securely, with clamping pressure spread evenly across the teeth. The retraction of the locating pin means it cannot split the timber, making it ideal for use with smaller and more delicate work.The locating pin tension is adjustable, allowing for lower tension to be set for small, delicate workpieces and higher tension for use with hard woods and large timbers.Another key benefit of this design is that the workpiece can be removed from the lathe if required and easily repositioned, using the indentations created by the locating pin and ring of teeth as an accurate guide. -
- The multi-tooth drive centres feature a ring of teeth around the circumference of the tip, with a central drive point to give accurate positioning. This design gives an extremely strong grip, thanks to the many points of contact in the timber, which also minimises the risk of splitting the timber.
-
Out of stock
The Record Power PT310 is a compact yet extremely accurate, powerful and easy to use heavy-duty planer thicknesser. It has been designed to offer serious home users a high performance solution for accurate dimensioning of timber. One of the key features of the PT310 is its parallel table lift design. Changeover from planing to thicknessing mode is fast and easy - simply loosen the cam action table locks and lift the entire table assembly, including the fence, in one movement.For a smooth, superior finish, the cutter block has 3 knives and the outfeed roller is rubber coated to reduce marking of the timber as it is fed from the machine. Easy to use, powerful and accurate, the PT310 gives professional performance and results in a compact and cost effective package.
-
Out of stock
3/4 Inch Stem For Older Lathes -
- The design of the 6-prong drive centres offers an enhanced grip to timber using the principle of opposing tooth profiles. The central point of the tool secures the drive centre in place, the six teeth around it grip the timber securely and the opposing tooth pattern ensures the wood fibres are pulled together to reduce the chance of splitting. Having two more teeth than the traditional 4-prong drive centres, they are ideal for use on hardwoods and larger pieces of wood.
-
This live centre kit gives woodturners a huge amount of flexibility, allowing for a wide range of work to be undertaken. The finely engineered live centre body features two sealed-for-life bearings for faultless, smooth performance. The high-precision manufacture ensure that the tips are a perfect fit in the live centre body and a rubber O-ring holds them in place securely. The tips are easily removed from the lathe tailstock using the supplied knockout bar. In addition to the many operations the tips make possible, the live centre body itself can be used to carry out long hole boring – with no tips fitted, it acts as a ring centre to support the workpiece and the body is fully bored to accept the standard 5/16” (8 mm) long hole boring augers.
Coronet Falcon Interchangeable Live Centre Traditional Tip
This traditional design features a 60º tip, to give effective penetration into the workpiece, supporting large timbers well. It is ideal for use on spindle work and can also be used to support headstock-mounted bowls and larger vessels from the tailstock. Internal support can be given to pre-bored timbers with bores from 1 to 43 mm in diameter, across the full range of the live centre cone taper.
Coronet Falcon Interchangeable Live Centre Detail Tip
This elongated single-point tip gives greater access to the workpiece at the tailstock - ideal for removing the bottoms of bowls, creating small dowels and much more. The tip is angled at 90º rather than the traditional 60º, ensuring the load is spread across a larger area, reducing the chance of splitting small, delicate workpieces.
Coronet Falcon Interchangeable Live Centre Multi-Tooth Tip
This multi-tooth live centre tip features a ring of teeth around the circumference, with a central drive point to give accurate positioning. This design gives an extremely strong grip, thanks to the many points of contact in the timber, which also minimises the risk of splitting the timber.
As the grip is spread across many small teeth rather than 4 or 6 prongs, it is possible to grip the timber sufficiently just by using the clamping pressure of the lathe tailstock.
Another benefit of this design is that your work can be removed from the lathe and accurately repositioned, using the markings created in the timber by the centre point and ring of teeth as an accurate guide.
This tip also gives a fantastic grip to paper-joint wood blanks, as the ring of teeth grip on many points across the drive’s circumference across both sections of wood on either side of the joint.
It makes an ideal partner to the range of Coronet Hawk Multi-Tooth Drive Centres, allowing timber to be held securely at both ends of the lathe quickly, easily and accurately.
Coronet Falcon Interchangeable Live Centre Pen Turning Tip
The pen turning tip is a game-changer for pen turners. Rather than use the screw at the tailstock end of the pen mandrel to secure the pen blanks, mechanisms and spacers in place, the pen turning tip simply slides over the mandrel and registers against the spacers. Tailstock clamping pressure is then used to secure the pen components in place between the headstock and tailstock.
This method means that no pressure is applied to the mandrel itself, eliminating the risk of bowing the mandrel which can cause the final pen to have uneven wall thickness, which in turn stops the pen’s components aligning correctly. Using the pen tip will help you create the most accurate and well-made pen possible. In addition, this method is fast, easy and secure, making it a great time-saving operation for prolific pen turners.
-
This ring centre features two high quality sealed-for-life bearings, giving extremely smooth rotation. The ring design gives a larger area of contact than a traditional live centre for an increased grip. This makes it ideal for supporting small or brittle timbers and works very well with paper-jointed blanks, giving a strong grip to both pieces of timber either side of the joint. Another great advantage of this design is that workpieces can be removed and refitted to the lathe accurately, thanks to the positive location of the centre point and ring, which can be used for easy registration. -
This live centre features two high quality sealed-for-life bearings, giving incredibly smooth rotation and the 60º point is optimised to give the best grip possible from a single point of contact. It is ideal for use on spindle work and can also be used to support headstock mounted bowls and larger vessels from the tailstock. -
Sale!
This heavy cast iron attachment allows for the turning of larger workpieces.*toolrest not included -
Out of stock
This Planer Thicknesser is perfectly suited to the discerning woodworker who expects professional, reliable performance from a solid and durable machine but doesn’t have the space or budget for a larger industrial machine. Heavy duty cast iron tables give this machine a degree of accuracy not found elsewhere on machines of this capacity or price bracket - infeed table is easily and accurately adjusted using the robust lever and clear depth scale. In addition, the PT107 also boasts an outfeed table adjustment facility, meaning truly exact calibration can be achieved to ensure superior accuracy when planing. For easy, rapid conversion to thicknessing mode, the hood is a large, steel one-piece swinging design. The thicknessing table is supported by a substantial central column, giving plenty of support to even the heaviest workpieces. To aid the thicknessing of particularly difficult stock, a clutch is provided on the thicknessing feed to allow removal of stock if jamming occurs. This also means that the thicknesser can be disengaged when not in use to save wear and tear on internal parts.
-
The Record Power RSBG8 Bench Grinder has a long-established reputation for robustness and reliability, making it the perfect choice for the home workshop. This new and upgraded machine has an industrial-inspired design with a heavy-duty motor and offers improved power, stability and performance. It features fully adjustable tool rests with solid locking mechanisms to give optimum support. The cast iron base and sturdy body reduce vibration to give the smooth operation that is essential for successful and accurate sharpening. Rubber feet also dampen vibration whilst ensuring the grinder does not move during use. The wide body of the machine further increases stability and minimises the load on the bearings for increased life. The 40 mm white stone is ideal for giving a fine finish, particularly to HSS turning tools, while the more coarse grey stone is perfect for rougher grinding and shaping. In addition, the spark guard of the white wheel features a magnifying lens to aid fine sharpening. The build quality and reliability of this grinder is significantly higher than some of the more common and cheaper machines which generally have lower powered motors and are substantially lighter. Record Power grinders are designed to give many years of service and replacement stones are readily available should the original ones become worn out, a sure sign of the robustness of these machines.
-
The DS300 is a superbly built and heavy duty disc sander; a real workhorse that will provide years of reliable service in the workshop. Featuring a cast iron body, disc and table, this machine is more than capable of withstanding heavy sanding tasks. The powerful motor provides plenty of power and torque to easily handle large sections of timber and the dynamically balanced disc ensures smooth operation. This machine is in a different league to other disc sanders. When seen in action, the build quality and performance speak for themselves. -
The BM16 is a compact bench mounted morticer, introducing new levels of accuracy, ease of use and industrial features at an affordable price. The table is finely ground cast iron and moves smoothly and effortlessly front to back and side to side on machined dovetail slides. To ensure unsurpassed accuracy, the slides are fully adjustable using the easily accessible gib strips. An important feature of the table is the heavy and solid clamp, the likes of which are usually only seen on more industrial machines, which holds workpieces extremely securely, ensuring no movement during operation. The clamp is also repositionable, allowing a wide range of timber sizes to be accommodated. Movement of the chisel is similarly smooth and accurate, with a gas spring and dovetail slides, which feature adjustable gib strips, allowing cuts to be made with ease and precision. To further increase accuracy and speed of use, the BM16 also features sideways movement stops as well as vertical movement stops. These stops allow the depth and width of mortices to be set in order to achieve consistent results again and again. -
Sale!
The Record 8" Buffing Machine is the ideal solution for buffing and polishing woods as well as some metals and can be used in conjunction with pastes and compounds on a wide range of surfaces. It features a heavy-duty cast iron base which can be bolted to a bench and rubber feet to reduce vibration, making for smooth and stable running. The machine is supplied with two high-quality 8” (200 mm) diameter fine buffing wheels to ensure an excellent finish is achieved. -
The SC1 and SC2 are the first mini-chucks on the market to offer woodturners a premium-quality solution for those who regularly turn small, intricate items - bringing the world-renowned quality of the SC3 and SC4 to the mini-chuck market. The SC1 works in conjunction with a separately available insert, which means it can be used across a wide variety of lathes with different thread sizes, with a simple change of insert. It also makes a perfect partner to the SC4 chuck, as the inserts are a universal fit between both chucks. It also has a very compact 53.5 mm (2”) diameter body - giving easier access around the workpiece making it ideal for the turning of very small items. Insert must be bought separately. -
The SC1 and SC2 are the first mini-chucks on the market to offer woodturners a premium-quality solution for those who regularly turn small, intricate items - bringing the world-renowned quality of the SC3 and SC4 to the mini-chuck market. The SC2 is a direct-thread chuck and features a larger diameter body than the SC1, at 63.5 mm (2 1/2”), giving larger holding capacities than the SC1. -
This faceplate ring is ideal for holding small to medium sized bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 40 mm jaw set which comes with both the SC1 and SC2 Mini Chucks. Diameter: 68 mm -
These jaws are perfect for drilling pen blanks, eliminating the need for a drill press and offering much more accurate results because the deep grip to all four sides ensures excellent holding power. Drilling on the lathe means the feed speed of the drill bit is under complete control, so a superior finish can be achieved on a wide range of materials. These jaws are also useful for working on small finials and similar projects, as in addition to their strong grip, the work piece is moved forward from the chuck to allow greater access. SC1 Contraction Spigot: 14 - 20 mm Contraction Square: 14 - 24.5 mm SC2 Contraction Spigot: 14 - 20 mm Contraction Square: 14 - 26 mm -
Another of the most popular jaws for full size chucks – these are also ideal for smaller chuck projects too. We have set the range of these bodies to be compatible with most tea light holder designs (on either body) as well as many salt or pepper pot designs and these offer an excellent expansion grip for many projects. The end of the jawis dovetailed so can be used on its own as a delicate grip – or the jaw can be inserted full length using the back jaw face as a register and providing wall support to prevent the workpiece being knocked from a dovetail only grip. The dovetail at the end provides additional security in expansion mode.SC1 Expansion: 39 - 47.5 mm Contraction Spigot: 6 - 14.5 mm Contraction Square: 4.5 - 12 mm SC2 Expansion: 39.5 - 60 mm Contraction Spigot: 6 - 26 mm Contraction Square: 4.5 - 25 mm -
These jaws are able to hold the smallest work pieces. The convex internal radius on each jaw is designed to avoid damage to small and fragile work. It allows the user to get very close to support thin work as safely as possible. It also allows good access to work close to the base of a work piece without the tool fouling on the jaws. For maximum support always ensure the workpiece features a spigot long enough to be supported along the full length of the jaws’ internal surface. SC1 Contraction Spigot: 4 - 11.5 mm Contraction Square: 4 - 11.5 mm SC2 Contraction Spigot: 4 - 25.5 mm Contraction Square: 4 - 25.5 mm -
Record Power Spindle Roughing Gouges designed for use between lathe centres on parallel grain, the deep and wide flutes of these gouges remove material with speed. Ideal for roughing out spindle blanks but they can also be useful for some finer work. -
Record Power Spindle Gouges these are ideal general-purpose spindle tools, ideal for producing beads, coves and sweeping profiles across a wide range of projects. -
Record Power Skew Chisels probably the most versatile tool for working between centres - they can give a silky smooth finish and may also be used for creating beads, coves and other decorative elements. -
Record Power Parting Tools mainly used for parting the finished workpiece from the waste wood. With the correct technique they can also be used for creating beads and patterns - a truly useful and essential tool. -
Record Power Bowl Gouges feature an improved flute profile, designed to help clear shavings quickly for more effective and faster cutting. -
Record Power Domed Scrapers (round-nose scrapers) feature a left-hand sweep to the grind, which allows them to be used on the insides of bowls with ease. Ideal for removing gouge marks and general smoothing work. -
This set contains the three essential tools for bowl turning - 3/8” bowl gouge, 1/2” domed scraper and 3/16” parting tool.These tools are manufactured to a standard that makes them perfect for use by demanding professionals but also at a cost which makes them ideal for the novice turner. Designed in consultation with and tested rigorously by professional woodturners, they represent a new standard in quality and value.The blades are made of high speed steel to keep their cutting edge longer and the handles of close-grained, stable and heavy beech. The shape of the handles has been specially designed, based on the requirements of experienced woodturners, to provide a strong and comfortable grip, leaving you free to concentrate on turning. -
This set contains the three essential tools for spindle turning - 1” spindle roughing gouge, 3/8” spindle gouge and 1/8” parting tool.These tools are manufactured to a standard that makes them perfect for use by demanding professionals but also at a cost which makes them ideal for the novice turner. Designed in consultation with and tested rigorously by professional woodturners, they represent a new standard in quality and value.The blades are made of high speed steel to keep their cutting edge longer and the handles of close-grained, stable and heavy beech. The shape of the handles has been specially designed, based on the requirements of experienced woodturners, to provide a strong and comfortable grip, leaving you free to concentrate on turning. -
Regent Variable Speed Lathe is the largest lathe in the exclusive range of Coronet lathes from Record Power and is ideal for the woodturner who regularly needs the power, stability and capacities necessary for very large scale work. It is supported by large and heavy integral cast iron legs to give ample protection from vibration while turning out of balance timbers. The overall heavy-duty construction of the machine, along with the finely engineered and machined components make this lathe a pleasure to use.
