-
A must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary. -
820h Round nose scraper 1/2inch ; 830h Parting tool 1/8 inch ; 840h Spindle gouge 3/8 inch ; 842h Bowl gouge 3/8 inch ; 843h Roughing gouge 3/4 inch ; 810h Standard Skew Chisel 3/4 inch -
Woodturning smock with velcro closures on the cuffs and collar, two large patch pockets on the rear, pen/pencil pocket conveniently provided on the left upper sleeve. Colour: bottle green. Material: 65% polyester, 35% cotton. -
- Respiratory protection to BS EN12941:1999 to cover all dusts generated when working in hard and softwoods, ply, MDF and other timber-based materials.
- Simple to swap over, the filters ensure you are always guaranteed full protection from harmful dusts.
- Filter efficiency 98% with a minimum laboratory protection factor of 50.
- Filters allow clean, unrestricted airflow as you work for maximum comfort and work efficiency.
-
Out of stock
Trend AIR PRO Airshield Pro Respirator Kit With 8hr Battery Suitable for use when machining MDF. The Air/Pro has been Approved to new standard BS EN 12941. Battery powered respirator for use with all woodworking applications. New features include: Combination face-seal and hood to improve protection. Motor positioned away from the sensitive area of the forehead to reduce noise and irritation. Strategic component distribution ensure optimum centre of gravity is achieved for balance and comfort. Twin filters with efficiency of 98%, more than double the Airshield MK1. Audible low battery warning. Removable 8 hour Ni-MH battery. -
Eye protection to EN166, 167, 168. (Medium protection against high speed particles) -
Out of stock
The SABRE range of bandsaws are the next evolutionary step from the highly regarded and market-leading Record Power premium bandsaws. The SABRE-450 builds on this success, boasting a range of fantastic new features in addition to being the largest ever bandsaw to bear the Record Power name. The 1500 W output (2 hp) motor drives the heavy cast iron wheels with ample power to cope with the heaviest of cuts. The cam-action fence adjustment, spring-loaded guides, cam-action blade tension release and double-sided fence mount make this a machine that is so easy to setup and use it leaves you free to concentrate fully on the project at hand. In addition, the SABRE-450 features an electromechanical braking system, making it ideal for use in educational environments. This machine requires a 16 Amp supply.
-
Out of stock
Elipse P3 Replacement Filter Kit is a pair of replacement filters for the Elipse P3 half face mask. Surpassing the European standard EN143 by achieved 99.98% filtration at 0.3 micron. It is therefore ideal for woodturners and woodworkers, giving complete protection, even when sanding. Can be used with Elipse models SPR501, SPR502 & Integra SPR406 Made in the UK. -
Out of stock
The Elipse range of respirators are made in Great Britain. The mask body is made from TPE (Thermo Plastic Elastomer) a flexible material which is designed to fit the contours of the face to provide a tight seal. The filter material is known as HESPA (High Efficiency Synthetic Particulate Airfilter). Together they provide absolute protection for woodworkers. The Elipse P3 has the highest classification for a particulate filter. Surpassing the European standard EN143 by achieved 99.98% filtration at 0.3 micron. It is therefore ideal for woodturners and woodworkers, giving complete protection, even when sanding. The twin filter arrangement consists of a light weight half face mask that is comfortable to wear for long periods of time. The low profile filters provide an unobstructed field of vision. Two adjustable elastic straps securely fasten the mask to the wearer. The two strap system allows the wearer to quickly put the mask on and off the face, whilst still wearing it around the neck. Can be worn with glasses ,without causing any steaming, and other PPE safety products including visors and helmets. It is perfect for everyday use by hobby and professional users. Other applications include metalworking, welding and stonemasonry. The Elipse P3 provides protection against dust particles, metal fumes (smoke), asbestos, oil and water mists, vapours, bacteria and viruses. Replacement filters are easily fitted. -
The wheel kit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis. -
The SABRE range of bandsaws are the next evolutionary step from the highly regarded and market-leading Record Power premium bandsaws. They have built on the success of their premium range by introducing some fantastic new features to the SABRE-350 to make a bandsaw that is more effective, accurate and easier to use than any other machine in its class. Featuring an 1100 W output (1 1/2 horsepower) motor coupled with the heavy-duty cast iron band wheels, the SABRE-350 packs a real punch and can handle cuts to its full capacity with ease. The two speeds, which are slightly faster than comparable machines, make it ideal for cutting non-ferrous metals as well as wood. The cam-action fence adjustment, spring-loaded guides, cam-action blade tension release and double-sided fence mount make this a machine that is so easy to setup and use it leaves you free to concentrate fully on the project at hand.
-
Out of stock
The midi sized lathe continues to be Charnwoods' best seller. It is a size which can accomplish most of the projects turners are likely to try and is the largest lathe which can comfortably be moved off the bench when not in use. We have developed ours further this year to now include an indexing system on the headstock spindle as well as more robust electronics, specifically designed for UK voltage. The bed of the lathe is one-piece precision ground cast iron giving 14" between centres when working with our new heavy duty centres, which are supplied as standard. The bowl turning capacity of 12" diameter over the bed, requires a very low speed which is achieved using a converter and a DC motor. A clear LCD display shows the current RPM. The tool rest banjo is a cam-lock design for rapid adjustments with all metal components. The tool rest itself is our ever popular round bar made from hardened steel The headstock is hollow centred to allow for easy tool removal, the tailstock is also hollow and has automatic centre removal. Supplied with drive and tail centres 2MT, knockout bar, 6" toolrest with 5/8" shank, 3" diameter faceplate, tool holder, carrying handles and cable tidy. N.B. The distance between centres will vary and be dependent on the type of centres or accessories used. Maximum distance is 450mm (18"). -
Innovation has been key to the progress of the Laguna brand and it is fully embraced here in the REVO 12/16 Midi Lathe. To overcome the issues of a traditional DC motor (Low torque at low speed and inability to achieve very low speeds) the controller uses the revolutionary Pulse Width Modulation system which feeds a succession of voltage pulses to the motor, monitoring the speed and automatically making adjustments to keep the speed constant. The result is a fantastic level of torque even at the incredibly low speed of 50rpm. The controls are mounted in an anodized aluminium plate, the ergonomic design is well positioned with a clear digital speed read out and easy access to all controls. The variable speed is smoothly controlled with a tactile rubber augmented knurled aluminium dial - A joy to use. Supplied with 2MT four prong drive centre, 2MT revolving tail centre, 75mm (3") diameter faceplate, 1.8m power cable with UK 3 pin plug. -
Out of stock
Laguna 18|36 REVO Lathe is designed for the user. Strength, stability and control are at the heart throughout to satisfy true specialists and woodturning professionals. One of the striking features of the lathe is an ergonomic panel with controls mounted in an anodized aluminium plate. The speed is smoothly controlled with a tactile rubber augmented knurled aluminium dial. Add the blue hue of the speed indicator and this machine stands out from the competition. The solid bed, with an impressive width of 208mm, is made of high-quality steel ASTM A36 (tougher than cast iron), and is precisely ground providing smooth travel of the headstock, tailstock and toolrest. The spindle is run by a highly efficient induction motor with a VFD frequency convertor for high torque even at lower speeds. The speed range can be changed with a clever one-lever mechanism. The headstock, tailstock and legs of the lathe are made from cast-iron securing minimum vibration and high comfort for turning of oversized pieces. Tailstock and Headstock cam lock levers are placed on the back of the machine and will not get in the way. All cam lock levers have soft grip handles and a long length resulting in a firm feel with no deflection. Supplied with 2MT four prong drive centre, 2MT revolving tail centre, 75mm (3") diameter faceplate, knock-out bar, onboard storage for accessories, 1.8m power cable with UK 3 pin plug. -
Smooth 1/4 turn action. Tooling for the pen: 7mm mandrel shaft,bushing set 2 & drill bit 'O' (not included). -
A stylish flat top fountain pen with a screw fit.
-
This Bolt Action pen will be hard for anyone to put down. Every detail, from the bolt action mechanism to the precision engineered components, was carefully designed to ensure uniqueness and reliability. The realistic bolt-action handle smoothly advances and retracts to securely lock the refill in place. Includes a bolt action rifle clip and a replica 30 caliber cartridge and rose gold bullet tip for added authenticity. Assembley instructions included. (Assembled pen for illustration only.)
-
This Bolt Action pen will be hard for anyone to put down. Every detail, from the bolt action mechanism to the precision engineered components, was carefully designed to ensure uniqueness and reliability. The realistic bolt-action handle smoothly advances and retracts to securely lock the refill in place. Includes a bolt action rifle clip and a replica 30 caliber cartridge and rose gold bullet tip for added authenticity. Assembley instructions included. (Assembled pen for illustration only.)
-
Extra 3/8in Tubes for 30 Caliber Bolt Action Pen Kits.
-
includes: 3 x long series HSS tin coated drills: 6.8, 6.9 & 7mm, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x 7mm pen kits, cones and spacers to suit most sizes of pen kit -
includes: 3 x long series HSS tin coated drills: 6.8, 6.9 & 7mm, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x 7mm pen kits, cones and spacers to suit most sizes of pen kit
-
Out of stock
NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit -
Out of stock
NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit
-
Allows precision insertion of pen mechanisms quickly and easily, eliminating risk of breakage. -
Self-centring design. Unique support and threaded rod design for accurate drilling. Holds and centres pen blanks up to 1-1/2 inch square. Quick and easy set up. -
Adjustable shaft allows the user to turn either one or two pen parts at a time, Supplied with shaft and spacers for 7mm pen kits plus cones to, accepts larger pen kits. Supplied with lock-nut kit for larger blanks.
-
Adjustable shaft allows the user to turn either one or two pen parts at a time, Supplied with shaft and spacers for 7mm pen kits plus cones to, accepts larger pen kits. Supplied with lock-nut kit for larger blanks. -
Out of stock
The new Colleted Pen Mandrel has been designed in the UK for pen turning professionals. Very similar to the Universal Pen Mandrel, its unique quarter-turn action clamps the shaft in place accurately and its completely dust free collet remains hidden.
-
The new Colleted Pen Mandrel has been designed in the UK for pen turning professionals. Very similar to the Universal Pen Mandrel, its unique quarter-turn action clamps the shaft in place accurately and its completely dust free collet remains hidden. -
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 7mm pens.
-
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 8.5mm, 9.5mm & 10mm pens.
