Keep your air brush in tip-top condition by using our Air Brush Cleaner after every use.
-
-
This exciting range of water-based acrylic paints comes in 8 metallic colours. Designed to add an even shimmer to your work they will really make it glow. Mix and match them, use them to highlight certain areas or cover everything in them, the choice is yours. Best used over sanding sealers, apply a spray lacquer over them once dry to seal them in. Can be applied by cloth, brush, spray gun, air brush or any suitable medium you choose! -
The Buffing Tree comprises of three 6 inch wheels, in the A, B and C cloth grades, firmly held on a central spindle. It’s ideal for buffing small items and, after loading the wheels with the compounds and wax, allows you to move from one wheel to the next in quick succession, dramatically reducing the time otherwise taken up by changing wheels. Ideal for polishing small items such as fruit, pens, boxes etc in batches. Requires one of our mandrels to fix to the chuck and a live centre for support at the tailstock. PLEASE NOTE: The Buffing Tree does not come as kit containing the mandrels and compounds etc; this is deliberate as if you already use the Buffing System you will have these and won’t want to buy them again. If you do not have these items they are available to purchase separately or as a pack in the Buffing Accessory Pack. -
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 10 TPI -
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 15 TPI.
-
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 20 TPI.
-
Out of stock
Divider with fine adjustment for measuring between two points, scribing circles prior to turning, marking along a spindle etc. -
Eye protection to EN166, 167, 168. (Medium protection against high speed particles) -
Out of stock
The BS300E is a great all rounder perfectly specified for the medium sized workshop where a range of duties will be required.Featuring a solid fence, vital for accurate ripping, which has a heavy extrusion mounted on a cast iron base and fixed to a solid steel bar for maximum rigidity and support. This is based on an industrial Startrite design and much more solid than other fences at this level. The machine also features a solid double trunnion fence mount to provide rigid table support and one-handed table tilt on a smooth rack and pinion. Adding to the structural integrity of the BS300E are the cast iron bandwheels which are fitted with precision ground rubber tyres to provide a flywheel effect for smooth cutting. A solid blade tension indicator is fitted to the rear of the machine to allow for easy setup. The BS300E is also supplied with a basic wheel kit as standard.
-
Two of the countrys leading woodturners, Nick Agar and David Springett, have collaborated to produce this new and exciting book. Together, they have developed a novel approach to woodturning using thin, narrow planks of wood (usually of little use to woodturners) to produce hollow, twisted vessels. This turning method is described in detail and there are 14 designs, each accompanied by fully illustrated step-by-step instructions plus an inspirational gallery. -
This practical new guide to pen and pencil turning, featuring 15 step-by-step projects. Pens from fine and rare timbers to acrylics and polymer clays, the possibilities are endless. Perfect for beginners to the lathe as well as more advanced turners, all the basic techniques and information needed for getting started are covered. From blank preparation to turning, sanding, polishing and assembling, everything is explained clearly and in jargon-free terms. -
Ready, Set, Turn! Weekend Woodturning Projects: 25 Simple Projects for the Home is the best way to start your woodturning and woodworking pursuit. This book will build your woodturning skills and your confidence. Ideal for beginner and intermediate turners. This book presents clear, step-by-step instructions accompanied by over 600 photographs and finely detailed drawings (with dimensions for further guidance) —here's all the hands-on knowledge you'll need to start your woodworking projects. Features that all weekend woodturning warriors will love:- Helpful sections on safety
- How to season wood
- Tool and material lists for each project
- Special sidebars describing the types of wood used
- Spindle roughing gouge
- Spindle gouge
- Parting tool
- Bowl gouge
- Skew chisel
- Scrapers
- Plus carving tools and a boring tool
- Rolling pin
- Candlestick
- Beaded bowl
- Salt and pepper mills
- Christmas ornaments, and many more!
-
An appropriate and imaginative choice of wood can really bring your work to life, and the more you understand about the raw material, the closer you can come to realizing your vision. This book describes 42 of the world’s most important woods for turning. It has been written specifically for woodturners by expert turner Mark Baker, and goes into great detail with regard to physical characteristics, working qualities and availability. Colour photographs throughout illustrate different varieties of grain and figure, and there are attractive examples of finished work to provide you with inspiration. More than 100 other woods are considered more briefly. This revised edition of Wood for Woodturners is fully updated with new images and resources. There is also valuable advice on buying and seasoning timber, sustainability and a handy guide to wood terminology. -
These are detailing tools used on between-centre work, where the grain is running parallel to the bed bars.They are used to create coves, beads and other profiles on goblets, vases and egg cups. -
Specially developed to allow the blade to move more easily along the tool rest than normal rectangular shaped chisels. -
These unique tools developed by the well respected North American woodturner, Dave Hout, are used for making finished cuts when producing bowls. The cut is shear and leaves the end grain smooth. With practice, sanding can be all but eliminated. The two tool set consists of one tool with a deeper flute to be used on bowls up to 5" -6" in diameter. The shallower tool is for use on bowls 6" and larger in diameter. -
Designed for deep hollow forms these tools have a polished H.S.S. adjustable top section which gives complete control on the depth of a cut. -
The Splay tool can be used as a skew chisel, a box scraper, a shear scraper and also for detail work on spindles.
-
Sale!
The BBS1 is a hugely versatile machine, particularly useful for tight curves as well as more sweeping contours, this bobbin sander allows beautiful, crisp results to be achieved with ease. The machine comes with two bobbins and corresponding table inserts and a range of additional sizes are also available. The BBS1 allows a wide array of shaping tasks to be accomplished with ease, from intricate craft projects to larger work on cabinets, chairs and much more. In addition, the powerful and quiet 1/2 hp induction motor ensures larger timbers can be handled effectively and easily. The finely ground cast iron surface also helps easy movement of the timber whilst providing extremely solid support. The build quality, features and versatility of this machine makes it an essential tool in almost any workshop. -
Adjustable shaft allows the user to turn either one or two pen parts at a time, Supplied with shaft and spacers for 7mm pen kits plus cones to, accepts larger pen kits. Supplied with lock-nut kit for larger blanks.
-
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 8.5mm, 9.5mm & 10mm pens. -
Bushes suitable for Flat top Fountain pen & Flat top rollerball (pack of 4).
-
7mm Stylus twist pen with broad band centre ring, gold clip.
-
This Bolt Action pen will be hard for anyone to put down. Every detail, from the bolt action mechanism to the precision engineered components, was carefully designed to ensure uniqueness and reliability. The realistic bolt-action handle smoothly advances and retracts to securely lock the refill in place. Includes a bolt action rifle clip and a replica 30 caliber cartridge and rose gold bullet tip for added authenticity. Assembley instructions included. (Assembled pen for illustration only.)
-
24K Jonah Clip
-
Shellac Sealers are used in the French polishing trade either; as a quick drying finish to seal timber after staining; or as a basecoat for subsequent coats of French Polish.
-
Removal of Plastic Coating from brushes, rollers and application equipment. Also used to thin Plastic Coating when necessary if it is to be sprayed. Also used to thin the product when an opened grained oil type finish is required. -
Used for diluting French polish, Light Fast and Earth Stains, or cleaning surfaces and tools.
