-
A red/brown timber veined with darker red stripes. The wood is dense, with a straight to sometimes interlocking grain which when turned has a fine even texture and polishes to a high finish. -
Planet Full Face Visor is ideally suited for woodturners and DIYers. It protects your eyes and face from woodshavings, dust, and low energy objects. Simply tighten the adjuster on the headband to get the best fit. Spare visors are also available (FV424V). The optical class Lens visor is made from clear acetate. It measure 320 x 190 mm with a nominal thickness of 1.15 mm. The visor is anti-fog (N). Recommended for protection from impact by low-energy, high-velocity particles. Full Face Yellow Visor Complete: FV424/SS/Y Visor Only: FV424V Yellow Browguard Only: FV424YV -
Sale!
The central locating pin of the drive centre retracts into its body when pressure is applied from the lathe tailstock, leaving the ring of teeth around the circumference to hold the workpiece extremely securely, with clamping pressure spread evenly across the teeth. The retraction of the locating pin means it cannot split the timber, making it ideal for use with smaller and more delicate work.The locating pin tension is adjustable, allowing for lower tension to be set for small, delicate workpieces and higher tension for use with hard woods and large timbers.Another key benefit of this design is that the workpiece can be removed from the lathe if required and easily repositioned, using the indentations created by the locating pin and ring of teeth as an accurate guide. -
A smart looking, traditional black velvet box with white satin lining on lid. -
Out of stock
Shellawax Glow is darker than regular Shellawax (a deep honey to tan colour). It is made from a special blend of shellacs and is designed to give more depth and richness to highly figured timbers like fiddleback, birdseye, flame and quilted woods. It will also give more richness and a sense of depth to many other timbers.
Shellawax Glow is identical in use and all other respects to regular Shellawax. It is applied in the same way and has all the same properties. It can also be mixed with Shellawax Cream as an extender and thinner and can be used over EEE-Ultra Shine.
This polish may darken white woods ever so slightly, so it is a good idea to try it on a scrap piece first to make sure it doesn't darken more than you want.
USING SHELLAWAX CREAM AS A SHELLAWAX GLOW EXTENDER Shellawax Glow can be mixed with Shellawax Cream as an extender. This allows for better use of these products on large turned work and for hand rubbed work. For bowls over (6”) 150mm diam, mix the Cream and Shellawax Glow at the rate of approx 50/50 this will give you a runny cream that will stay on the surface longer and allow you more time to work it into the timber.
Use different mixing rates for various jobs 20% Cream to 80% Shellawax Glow for large platters etc up to 900mm (3’) diam and larger.
SHELLAWAX GLOW AS A THINNER Use Shellawax as a thinner for Shellawax Cream, which often thickens with use. This will also extend the life of the Cream. The slight colour difference will not effect the colour of Cream when used.
-
Sale!
Adds 407 mm extra capacity between centres to the Coronet Herald lathe. -
Sale!
The SC1 and SC2 are the first mini-chucks on the market to offer woodturners a premium-quality solution for those who regularly turn small, intricate items - bringing the world-renowned quality of the SC3 and SC4 to the mini-chuck market. The SC1 works in conjunction with a separately available insert, which means it can be used across a wide variety of lathes with different thread sizes, with a simple change of insert. It also makes a perfect partner to the SC4 chuck, as the inserts are a universal fit between both chucks. It also has a very compact 53.5 mm (2”) diameter body - giving easier access around the workpiece making it ideal for the turning of very small items. Insert must be bought separately. -
Record Power Spindle Gouges these are ideal general-purpose spindle tools, ideal for producing beads, coves and sweeping profiles across a wide range of projects. -
Out of stock
Deep orange-brown timber with broad medullary rays creating a flame pattern on quarter cut faces or numerous spots on flat sawn surfaces. Hard and heavy with a slightly coarse texture. -
Related Products: These cutters are designed for use with the following tools: Medium tear-drop scraper (RS200C) to suit Multi-tip Hollowing System (RS200KT, RS200) Large tear-drop scraper(RS213C) to suit RS2000 Deep Hollowing System The Robert Sorby medium tear drop cutter, like its big brother (Large Teardrop RS213C) provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports traditional scraping and shear scraping techniques. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the 472 cutter holder to reshape the profile on the Robert Sorby ProEdge or on a grinding wheel. -
100 to 57 mm reducer, for use with bench machines or power tools. -
Y connector for use in 100 mm diameter workshop dust extraction systems to reduce down to 63 mm. 100 x 100 x 63 mm. -
These unique tools were developed with the help of 'Bill Jones' and come with a full instructional brochure. -
Crown Spindle Gouges are their range of milled regular English gouges, are available in their range to suit all requirements for Spindle work. -
Solid brass ready reckoner for 40 years. Gives day/date/month/year by twisting the top brass disc and mating up the required sequence. 63mm diameter. -
Pack of 10, cable restraints to secure cable and prevent the wiring from being dislodged. -
Bushes suitable for 7mm twist pen (pack of 2).
-
2pc bushing set for the 30 Caliber Bolt Action Pen Kits.
-
7mm Twist Pen with a greek key centre ring, tapered ball end black clip.
-
Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. -
This bleached knitted cotton cloth is ideal for applying and buffing most products; the slightly coarse texture ensures that the applied coating is spread thinly, which is always preferable. Not recommended for use on the lathe. -
This clear, slower drying solvent is primarily for thinning our Spirit Stain to give delicate wash effects without affecting the colour (as methylated spirit would). It can also be used to dilute Friction Polish or French Polish if needed (usually only when the cap has been left off and the product has thickened up). It’s also suitable for use in making french polish if you want to dissolve shellac flakes in it. -
This sanding sealer is designed to raise the grain and make it brittle, it can then be sanded of with fine grit abrasive paper leaving a smooth fine surface to apply finish. -
Hampshire Sheen CarnaCrystalline is a secret blend of Carnauba and Microcrystalline waxes in a 31g turners stick that produces a gloss finish like nothing else. Easier to apply than a traditional carnauba wax stick. -
Self supporting extraction port and hose, ideal for woodturning, 660mm in length. This is an official LOC-LINE® product, the original and best modular hose. Suitable for 2.5" systems. -
Sale!
These jaws are a smaller version of the standard 50 mm jaws, featuring the same dovetail profile in expansion and the superb grip of the hawk beak design on contraction. Designed specifically for smaller spigots and recesses, this set is incredibly versatile and makes a great addition to any turner’s tool collection. Expansion: 38 - 58 mm Contraction Spigot: 28 - 47 mm Contraction Square: 16 - 37 mm -
Sale!
This faceplate ring is ideal for holding medium sized bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 50 mm jaw set which comes complete with all Record Power chuck packages. Must be used with: 62313 50 mm Standard Jaws (Supplied with SC3 and SC4 chucks) Diameter: 87 mm -
6mm hook and straight mini carbide set. Excellent carbide tools for boxes and small hollow forms. Bars are made from stainless steel for strength. The hook is forged to shape with the cutter tipped slightly downwards for easy controlled cutting. Max depth is recommended as no more than 5-6" deep for this set. -
Out of stock
3/4 Inch Stem For Older Lathes
