-
These cotton wheels come complete with the fixings needed to attach them to the mandrels in the Buffing System. Use Wheel A with Compound 1 for a preparatory cutback Use Wheel B with Compound 2 for an ultra fine surface prior to waxing Use Wheel C with Carnauba Wax Stick, Microcrystalline Wax or Microcrystalline Wax Stick. -
Wax Filler Sticks are blended wax filler used to repair cracks, splits and small to medium-sized holes without sanding or having to strip the finish. Available in a wide range of intermixable wood colours, they can be applied without a heat source, are quick drying and have no shrinkage making them ideal for use on finished furniture and other articles. -
The original Stebcentre is an invaluable accessory for every woodturner. Fitted in the lathe head-stock it is a boon for both the novice and the experienced. Its ring of sharp teeth ensure that the Stebcentre bites the wood to give more security and more drive. Because there are several points of contact there is minimal risk of splitting. The Stebcentre can be used with equal confidence on both soft and hardwoods as well as synthetic materials. In its patented design the Stebcentre also features a spring-loaded point. By slightly backing off the tail-stock the work piece still remains resting between the revolving centre and the Stebcentre. This allows the turner to inspect his work without the need to switch off the lathe. Where time is a critical factor the Stebcentre is ideal as the work-piece can be quickly removed without stopping the lathe. Overall length: 4". Patent No. 2286138 -
7mm Twist Pen with a decorated centre ring, tapered ball end black clip. -
Out of stock
7mm Twist Pencil with a decorated centre ring, tapered ball end black clip.
-
Rosewood colour stained wooden display box for 7mm pens, in white carton for protection. -
Allows precision insertion of pen mechanisms quickly and easily, eliminating risk of breakage. -
Crown 3/4" Side Cutting Scrapers are designed specifically for finishing bottoms of bowls and boxes.
-
Interior and exterior use, strong initial tack with fast setting. Excellent sandability, unaffected by finishes. FDA approved for indirect food contact and easy to clean away with water. Open time 5 minutes, assembly time 10-15 minutes, shelf life 12 months (kept airtight). -
The long grind jig helps you create three different fingernail profiles on bowl and spindle gouges. -
Brass spade hands 85mm minute hand with matching second hand and hour hand. -
Holds tips and cutters securely allowing easy sharpening of small and difficult to grasp attachments. -
Sleeve for using 1 Morse Taper accessories on a 2 Morse Taper lathe. -
Record Power Skew Chisels probably the most versatile tool for working between centres - they can give a silky smooth finish and may also be used for creating beads, coves and other decorative elements. -
Adds 407 mm extra capacity between centres to the Coronet Herald lathe. -
- The design of the 6-prong drive centres offers an enhanced grip to timber using the principle of opposing tooth profiles. The central point of the tool secures the drive centre in place, the six teeth around it grip the timber securely and the opposing tooth pattern ensures the wood fibres are pulled together to reduce the chance of splitting. Having two more teeth than the traditional 4-prong drive centres, they are ideal for use on hardwoods and larger pieces of wood.
-
Out of stock
3/4 Inch Stem For Older Lathes -
The central locating pin of the drive centre retracts into its body when pressure is applied from the lathe tailstock, leaving the ring of teeth around the circumference to hold the workpiece extremely securely, with clamping pressure spread evenly across the teeth. The retraction of the locating pin means it cannot split the timber, making it ideal for use with smaller and more delicate work.The locating pin tension is adjustable, allowing for lower tension to be set for small, delicate workpieces and higher tension for use with hard woods and large timbers.Another key benefit of this design is that the workpiece can be removed from the lathe if required and easily repositioned, using the indentations created by the locating pin and ring of teeth as an accurate guide. -
6mm hook and straight mini carbide set. Excellent carbide tools for boxes and small hollow forms. Bars are made from stainless steel for strength. The hook is forged to shape with the cutter tipped slightly downwards for easy controlled cutting. Max depth is recommended as no more than 5-6" deep for this set. -
This faceplate ring is ideal for holding medium sized bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 50 mm jaw set which comes complete with all Record Power chuck packages. Must be used with: 62313 50 mm Standard Jaws (Supplied with SC3 and SC4 chucks) Diameter: 87 mm -
These jaws are a smaller version of the standard 50 mm jaws, featuring the same dovetail profile in expansion and the superb grip of the hawk beak design on contraction. Designed specifically for smaller spigots and recesses, this set is incredibly versatile and makes a great addition to any turner’s tool collection. Expansion: 38 - 58 mm Contraction Spigot: 28 - 47 mm Contraction Square: 16 - 37 mm -
Self supporting extraction port and hose, ideal for woodturning, 660mm in length. This is an official LOC-LINE® product, the original and best modular hose. Suitable for 2.5" systems. -
Made in the USA, these are the original and best quality Foam Brush. Manufactured using a special foam with a stiffener inside to make sure they keep their shape in use, and supplied with a solid wooden handle attached. Great for eliminating brush marks (no bristles = no brush marks) and there’s no danger of any stray bristles coming loose and spoiling your work. Priced to be semi-disposable they will normally wash out several times for re-use. Fantastic for applying acrylic finishes which have a tendency to froth up when applied by brush – the Foam Brush virtually eliminates this completely. Can also be used for painting, particularly gloss paints, seasoned users have been known to have a brush in each hand! -
This sanding sealer is designed to raise the grain and make it brittle, it can then be sanded of with fine grit abrasive paper leaving a smooth fine surface to apply finish.
-
This clear, slower drying solvent is primarily for thinning our Spirit Stain to give delicate wash effects without affecting the colour (as methylated spirit would). It can also be used to dilute Friction Polish or French Polish if needed (usually only when the cap has been left off and the product has thickened up). It’s also suitable for use in making french polish if you want to dissolve shellac flakes in it. -
This bleached knitted cotton cloth is ideal for applying and buffing most products; the slightly coarse texture ensures that the applied coating is spread thinly, which is always preferable. Not recommended for use on the lathe. -
Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. -
7mm Twist Pen with a greek key centre ring, tapered ball end black clip.
-
2pc bushing set for the 30 Caliber Bolt Action Pen Kits.
