-
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 10 TPI -
The width of these pin end blades makes them ideal for straighter and more arduous cuts, such as deep hard woods. The tooth pattern makes them ideal for faster cutting as they provide better chip clearance than standard tooth patterns. 3 mm wide, 0.5 mm thick, 9 TPI. -
The width of these pin end blades makes them ideal for straighter and more arduous cuts, such as deep hard woods. The tooth pattern makes them ideal for faster cutting as they provide better chip clearance than standard tooth patterns. 2 mm wide, 0.25 mm thick, 18.5 TPI.
-
Skip tooth pattern to suit BS400. Also fits Axminster JBS180 & Jet JWBS18 -
Designed to hold wood securely without splitting, this drive centre gives superior hold. The opposing tooth profiles mean that as they enter the wood, the fibres are pushed together rather than apart, holding the timber together. -
The Compendium of Wooden Wand Making Techniques is here to show you how simple making wands can be – no mysterious magic necessary! In the first-ever guide for muggles to making wands, you’ll learn how to hand carve, power carve, wood turn, and scroll saw 20 unique projects that are sure to delight and manage mischief. Be inspired with a gallery of beloved staff-carrying and wand-wielding characters from the infamous Harry Potter and Lord of the Rings series, then use the Wand Sketchbook section to design your own original wands! From there, five wand projects for each woodworking technique are presented with step-by-step instructions, coordinating photography, and patterns. Conjuring up wooden wands might seem like a magical and mysterious process, but the Compendium of Wooden Wand Making Techniques is here to show you how simple it can be! In the first-ever guide to making wands, you’ll learn how to hand carve, power carve, wood turn, and scroll saw 20 unique projects that are sure to delight and manage mischief. Be inspired with a gallery of beloved staff-carrying and wand-wielding characters from the infamous Harry Potter and Lord of the Rings series – from Albus Dumbledore, Hermione Granger, and Severus Snape to Gandalf, Saruman, and several others. Woven throughout these gallery pages are images of wands you can make in the book that are thematically similar – but distinct from – these iconic wands and staffs! Also provided is a Wand Sketchbook section as a jump-off point for you to design wands of your own, along with areas to include your original wand’s name, wood type, length, core, and special skills. From there, five wand projects for each woodworking technique are presented with step-by-step instructions, coordinating photography, and patterns. A complete project collection that’s truly the first of its kind, this book is a must-have source of inspiration that belongs in any muggle’s and woodworker’s library who has a love for all things fiction and fantasy! -
Learning the art of intarsia has never been easier thanks to celebrated artist and instructor Kathy Wise!- Over 40 skill-building lessons, exercises, and projects break down important techniques into manageable, easy-to-understand steps
- Step-by-step instructions, patterns, reference photos, and material lists guide you through each lesson
- Tips & hints from author Kathy Wise help you turn multiple pieces of wood into stunning art
- Progressive teaching style teaches not only the basics, but the nuances of working with multiple shades of wood
-
130mm white dial with Arabic or Roman numerals, brass diamond turned bezel ring and domed glass clock insert. Requires a hole approximately 83-85mm diameter x 25mm deep to insert mechanism into. -
When more than one hose branch is being used, it is advisable to close off all the inactive lines using these gates to ensure maximum airflow along the active line. These aluminium blast gates are far stronger than the plastic ones and are therefore more suitable to a trade or professional environment. The centre plate simply slides between the open and closed position and can be locked in position. The blast gate has two 100mm (4") connections. Our 100mm hose can be connected directly and secured with a hose clamp, 100HC. Blast gates can be attached directly to a 100mm diameter outlet on a machine using a tapered joining sleeve, 100SL. Gates are also commonly attached to a splitter (T-Branch or Y-Branch) using a tapered joining sleeve. You can mount the gate wherever is the most convenient position. -
Metal bezel on a plastic case, fits a case hole of 58 to 62mm diameter x 18mm deep with spring fitting. Bezel diameter 85mm. Takes an LR1 battery . -
Lubricating Wax is specially formulated to lubricate and clean interior tools and machinery to increase their efficiency and keep working parts moving freely. Silicone-free, it is suitable for use on saw blades, cutter blades, machine tables, lathes and planers to increase longevity, and help to reduce rust and corrosion on all bare metal surfaces . Its special properties will also assist in the quick cleaning and easy removal of glue from veneer presses and G-clamps, as well as help to reduce resin build-up from softwood.
-
Gold metal bezel on a plastic case, fits a case hole of 58 to 62mm diameter x 18mm deep with spring fitting. Bezel diameter 100mm. Takes an LR1 battery. -
This sanding sealer is designed to raise the grain and make it brittle, it can then be sanded of with fine grit abrasive paper leaving a smooth fine surface to apply finish. -
A dark brown to sometimes nearly black wood with straight to interlocking grain. Hard and heavy with good working qualities. Turns and finishes well and takes a good polish. -
When you’re looking for a hard-wearing, heat and water resistant, quick drying gloss lacquer you need look no further than Melamine Lacquer.
Based on cellulose technology, Melamine Lacquer has a catalyst suspended within it; when the lacquer is in the can it is inert but once applied and exposed to the air, the lacquer dries within five minutes like a cellulose and then the catalyst kicks in and the lacquer goes on to chemically cure to give a more durable coating. 90% of the curing process happens in the first seven days after application, making the lacquer very hard wearing, the remaining 10% of the process can take up to two weeks more to give maximum toughness, something you only need to consider if the lacquer is going to be subjected to extremely hard use.
Melamine Lacquer is designed to give a full gloss finish which will be achieved with a very careful application. It can be applied by brush (foam or bristle), cloth or by spraying. Where necessary, use cellulose thinners to dilute the product – especially helpful if working on a large area.
The gloss level of Melamine Lacquer can be increased by using burnishing cream once it has dried, and it can also be overcoated with friction polish (to increase the depth of the shine) or woodwax 22 or microcrystalline wax (for a more natural feel).
-
40 micron -
A blend of natural plant oils to nourish and protect chopping boards and worktops. It penetrates the wood with no surface film to chip. It has a clear finish to enhance the natural beauty of wood. The Oil contains anti-microbial additives with a slow release formula which provide protection against a wide range of bacteria including E-coli and MRSA. Rustins Chopping Board Oil conforms to The Articles in Contact with Food Regulations. -
Fine finishing starts with good preparation! Use these mildly abrasive pads after sanding for that final smoothing process to give a near-perfect surface prior to applying any finish. Very long lasting, these pads are also very flexible and do not crumble, thus avoiding any fear of contamination of your work. Exercise care when using these pads with the lathe revolving. -
The long grind jig helps you create three different fingernail profiles on bowl and spindle gouges. -
Keith Rowley's bestselling introduction to the art of woodturning is exceptional for its friendly and methodical approach, building up the reader's skills and confidence by logical and progressive steps. At the heart of Keith's method are the 'Laws of Woodturning': six easily memorized rules which are fundamental to efficient and safe technique. Both between-centres and faceplate turning are described and illustrated in detail. You will learn about timber selection, and how to choose the right tool and equipment. This latest edition has been comprehensively revised and updated by renowned wood turner Andy Coates to include the latest available tools and machinery as well as up-to-date health and safety guidelines -
An appropriate and imaginative choice of wood can really bring your work to life, and the more you understand about the raw material, the closer you can come to realizing your vision. This book describes 42 of the world’s most important woods for turning. It has been written specifically for woodturners by expert turner Mark Baker, and goes into great detail with regard to physical characteristics, working qualities and availability. Colour photographs throughout illustrate different varieties of grain and figure, and there are attractive examples of finished work to provide you with inspiration. More than 100 other woods are considered more briefly. This revised edition of Wood for Woodturners is fully updated with new images and resources. There is also valuable advice on buying and seasoning timber, sustainability and a handy guide to wood terminology. -
Ready, Set, Turn! Weekend Woodturning Projects: 25 Simple Projects for the Home is the best way to start your woodturning and woodworking pursuit. This book will build your woodturning skills and your confidence. Ideal for beginner and intermediate turners. This book presents clear, step-by-step instructions accompanied by over 600 photographs and finely detailed drawings (with dimensions for further guidance) —here's all the hands-on knowledge you'll need to start your woodworking projects. Features that all weekend woodturning warriors will love:- Helpful sections on safety
- How to season wood
- Tool and material lists for each project
- Special sidebars describing the types of wood used
- Spindle roughing gouge
- Spindle gouge
- Parting tool
- Bowl gouge
- Skew chisel
- Scrapers
- Plus carving tools and a boring tool
- Rolling pin
- Candlestick
- Beaded bowl
- Salt and pepper mills
- Christmas ornaments, and many more!
-
This practical new guide to pen and pencil turning, featuring 15 step-by-step projects. Pens from fine and rare timbers to acrylics and polymer clays, the possibilities are endless. Perfect for beginners to the lathe as well as more advanced turners, all the basic techniques and information needed for getting started are covered. From blank preparation to turning, sanding, polishing and assembling, everything is explained clearly and in jargon-free terms. -
Out of stock
Having made literally thousands of pens and pencils themselves, the authors have employed all of their thirty years' plus experience to write this definitive introduction to their craft. Includes history, techniques and projects - something for beginners and seasoned pen makers to enjoy. -
Spheres within spheres, stars within cubes, delicate lattices with no apparent means of support—woodturners over the centuries have developed a whole range of extraordinary structures which seem at first sight to be quite impossible. In fact, all of these things can be made by anyone with basic woodturning skills, an ordinary lathe and simple hand tools—and this book shows you how.- A best-seller when first published in 1993, the book has been thoroughly revised for this new edition.
- Stunning new 3-D illustrations show cutaway views of the work in progress, making the instructions even easier to follow than before.
- A variety of projects in addition to an introductory chapter outlining the required equipment, advice on selecting wood, as well as workshop safety.
-
Two of the countrys leading woodturners, Nick Agar and David Springett, have collaborated to produce this new and exciting book. Together, they have developed a novel approach to woodturning using thin, narrow planks of wood (usually of little use to woodturners) to produce hollow, twisted vessels. This turning method is described in detail and there are 14 designs, each accompanied by fully illustrated step-by-step instructions plus an inspirational gallery. -
This book will guide you through the various health and safety issues, the tools and equipment needed to get the best out of your woodturning, mastering the basic techniques and how to add decorative features. Nick Arnull illustrates how to use highly original decorative methods and artistic skills to complete the finished projects. Each project includes easy-to-follow instructions and detailed photography to inspire you to take what you have learnt and apply these skills to your own work. -
Derek Hayes investigates the process and practice of design in woodturning. While aiming to instill confidence in appreciating, criticising and selecting sources of inspiration, He looks closely at design elements, sketching, proportion, pattern, open forms, enclosed forms, the foot, the rim, using wood, decoration and colour; with instructive diagrams and photographs that will guide the reader to a better understanding of design. -
30 Projects are rated in order of difficulty, from beginner, through to intermediate and advanced, the latter not solely based on the skills of the turner, but also on access to the materials or machinery required for the project. Not everyone has access to particular machinery, tools or skills, but a basic level of turning is assumed, together with the availability of a chuck with compression jaws. -
Replacement for the main filter on Record Power high filtration dust extractors.
