-
This practical new guide to pen and pencil turning, featuring 15 step-by-step projects. Pens from fine and rare timbers to acrylics and polymer clays, the possibilities are endless. Perfect for beginners to the lathe as well as more advanced turners, all the basic techniques and information needed for getting started are covered. From blank preparation to turning, sanding, polishing and assembling, everything is explained clearly and in jargon-free terms. -
Out of stock
Having made literally thousands of pens and pencils themselves, the authors have employed all of their thirty years' plus experience to write this definitive introduction to their craft. Includes history, techniques and projects - something for beginners and seasoned pen makers to enjoy. -
Spheres within spheres, stars within cubes, delicate lattices with no apparent means of support—woodturners over the centuries have developed a whole range of extraordinary structures which seem at first sight to be quite impossible. In fact, all of these things can be made by anyone with basic woodturning skills, an ordinary lathe and simple hand tools—and this book shows you how.- A best-seller when first published in 1993, the book has been thoroughly revised for this new edition.
- Stunning new 3-D illustrations show cutaway views of the work in progress, making the instructions even easier to follow than before.
- A variety of projects in addition to an introductory chapter outlining the required equipment, advice on selecting wood, as well as workshop safety.
-
Two of the countrys leading woodturners, Nick Agar and David Springett, have collaborated to produce this new and exciting book. Together, they have developed a novel approach to woodturning using thin, narrow planks of wood (usually of little use to woodturners) to produce hollow, twisted vessels. This turning method is described in detail and there are 14 designs, each accompanied by fully illustrated step-by-step instructions plus an inspirational gallery. -
This book will guide you through the various health and safety issues, the tools and equipment needed to get the best out of your woodturning, mastering the basic techniques and how to add decorative features. Nick Arnull illustrates how to use highly original decorative methods and artistic skills to complete the finished projects. Each project includes easy-to-follow instructions and detailed photography to inspire you to take what you have learnt and apply these skills to your own work. -
Derek Hayes investigates the process and practice of design in woodturning. While aiming to instill confidence in appreciating, criticising and selecting sources of inspiration, He looks closely at design elements, sketching, proportion, pattern, open forms, enclosed forms, the foot, the rim, using wood, decoration and colour; with instructive diagrams and photographs that will guide the reader to a better understanding of design. -
The worlds pre-eminent woodturning teacher provides everything you need to know to turn bowls. Richard Raffan draws upon his 30 plus years of experience to lead you through the key elements -- from planning to completion. With the help of detailed text and step-by-step photos, Raffan covers wood and tool selection, design advice, surface embellishment and finishing techniques. For the more experienced turners, there are chapters on advanced techniques, decoration, and form and balance. You'll also find extensive appendices, troubleshooting charts and advice on selling bowls. Perhaps best of all, Raffans contagious respect for the craft comes through on each page, and it will stir you to do your best work. Turning Bowls gives you:- thorough coverage of tools, wood selection and design
- advice on how to avoid and solve common turning problems
- information that ranges from the basic to the advanced
- expert-level instruction in an easy-to-understand format
-
30 Projects are rated in order of difficulty, from beginner, through to intermediate and advanced, the latter not solely based on the skills of the turner, but also on access to the materials or machinery required for the project. Not everyone has access to particular machinery, tools or skills, but a basic level of turning is assumed, together with the availability of a chuck with compression jaws. -
Set of 12 chisel profiles, the RPCV12/A, also includes a tuitional DVD and booklet from internationally acclaimed carver and teacher Mike Davies. Mike has developed his unique and highly successful 'carving by numbers' system as a way to impart his years of expertise, ideal for the novice carving enthusiast. This DVD features his Significant Six carving techniques that will form a solid foundation upon which skills can be built. For more details and to see a video click on more info button. -
The ideal beginners set. These small carving tools, made from high quality hardened and tempered Carbon steel, are fitted with stained Beech handles. The ready honed blades feature 5/16" 8mm Square Chisel, 5/16" 8mm Bent Square Chisel, 5/16" 8mm Skew Chisel, 3/16" 5mm Straight Gouge, 5/16" 8mm Bent Gouge and 3/16" 5mm Bent 'V' tool. -
With a cast iron table at the heart of this compact machine it is designed to offer those with limited space or budgets a real bandsaw with sensible capacity and performance, as an alternative to lightweight hobby machines. The BS250 should not be confused with the lightweight hobby machines available in the market at a similar price. It shares the same essential build qualities as its larger cousins – strong steel frames, dynamically balanced bandwheels, cast iron tables and an induction motor. It has been designed to offer the user with space restrictions a serious machine in compact form. The machine can be bench mounted or fitted to the optional stand and wheel kit, providing great flexibility in a tight space.
-
The BS300E is a great all rounder perfectly specified for the medium sized workshop where a range of duties will be required.Featuring a solid fence, vital for accurate ripping, which has a heavy extrusion mounted on a cast iron base and fixed to a solid steel bar for maximum rigidity and support. This is based on an industrial Startrite design and much more solid than other fences at this level. The machine also features a solid double trunnion fence mount to provide rigid table support and one-handed table tilt on a smooth rack and pinion. Adding to the structural integrity of the BS300E are the cast iron bandwheels which are fitted with precision ground rubber tyres to provide a flywheel effect for smooth cutting. A solid blade tension indicator is fitted to the rear of the machine to allow for easy setup. The BS300E is also supplied with a basic wheel kit as standard. -
Out of stock
An ideal workhorse for the busy workshop where power and generous capacity are required but budget and space do not allow a bigger machine. This features an open legstand, often requested by our users as it provides greater stability and can be used with an optional pedal style wheelkit. A basic wheelkit is provided as standard. The bandwheels are cast iron and dynamically balanced with precision ground, crowned rubber tyres usually only found on much more expensive industrial machines – the flywheel effect of the cast iron wheels improves cutting performance and speeds. Our tables are some of the largest in their category and a one piece cast double trunnion has been designed to provide even greater support and rigidity. The rip fence is the strongest and most industrial in its category with a chromed fence and the mount machined from a single piece of cast iron. The extrusion itself is a heavy section to provide rigidity and accuracy. -
Super thin penetrating formula, bonds in 1 - 5 seconds. -
Allows 7 - 10 seconds for positioning, cures in 20 seconds. -
Very high viscosity formula, super thick and super strong. Allows approximately 30 - 40 seconds for positioning. Cures in 90 seconds, ideal for gap filling. Use zip kicker to accelerate cure time. -
Accelerates Super Glue cure time. Best working accelerator for ZAP. Sets in just a few seconds. -
Interior use only, initial tack time 30 mins, setting time 24 hours approximately. Open time 5 minutes, assembly time 10-15 minutes, shelf life 12 months (kept airtight). -
Interior and exterior use, strong initial tack with fast setting. Excellent sandability, unaffected by finishes. FDA approved for indirect food contact and easy to clean away with water. Open time 5 minutes, assembly time 10-15 minutes, shelf life 12 months (kept airtight). -
he waterproof formula provides superior bond strength, longer open assembly time and lower application temperature. -
Out of stock
Aids in removing cured superglues from skin and work surfaces. Debonding agent for all super glues. Always test first. 1-oz bottle. -
Skip tooth pattern to suit BS250 & Sabre 250. Also fits RSBS10, Clarke CBS335, Nutool HBS14 -
Skip tooth pattern to suit BS300E. Also fits Startrite 301S/301E, Poolewood 1402, Scheppach Basato 3
-
Out of stock
Trend AIR PRO Airshield Pro Respirator Kit With 8hr Battery Suitable for use when machining MDF. The Air/Pro has been Approved to new standard BS EN 12941. Battery powered respirator for use with all woodworking applications. New features include: Combination face-seal and hood to improve protection. Motor positioned away from the sensitive area of the forehead to reduce noise and irritation. Strategic component distribution ensure optimum centre of gravity is achieved for balance and comfort. Twin filters with efficiency of 98%, more than double the Airshield MK1. Audible low battery warning. Removable 8 hour Ni-MH battery. -
Eye protection to EN166, 167, 168. (Medium protection against high speed particles) -
- Respiratory protection to BS EN12941:1999 to cover all dusts generated when working in hard and softwoods, ply, MDF and other timber-based materials.
- Simple to swap over, the filters ensure you are always guaranteed full protection from harmful dusts.
- Filter efficiency 98% with a minimum laboratory protection factor of 50.
- Filters allow clean, unrestricted airflow as you work for maximum comfort and work efficiency.
-
Out of stock
The Elipse range of respirators are made in Great Britain. The mask body is made from TPE (Thermo Plastic Elastomer) a flexible material which is designed to fit the contours of the face to provide a tight seal. The filter material is known as HESPA (High Efficiency Synthetic Particulate Airfilter). Together they provide absolute protection for woodworkers. The Elipse P3 has the highest classification for a particulate filter. Surpassing the European standard EN143 by achieved 99.98% filtration at 0.3 micron. It is therefore ideal for woodturners and woodworkers, giving complete protection, even when sanding. The twin filter arrangement consists of a light weight half face mask that is comfortable to wear for long periods of time. The low profile filters provide an unobstructed field of vision. Two adjustable elastic straps securely fasten the mask to the wearer. The two strap system allows the wearer to quickly put the mask on and off the face, whilst still wearing it around the neck. Can be worn with glasses ,without causing any steaming, and other PPE safety products including visors and helmets. It is perfect for everyday use by hobby and professional users. Other applications include metalworking, welding and stonemasonry. The Elipse P3 provides protection against dust particles, metal fumes (smoke), asbestos, oil and water mists, vapours, bacteria and viruses. Replacement filters are easily fitted. -
Out of stock
Elipse P3 Replacement Filter Kit is a pair of replacement filters for the Elipse P3 half face mask. Surpassing the European standard EN143 by achieved 99.98% filtration at 0.3 micron. It is therefore ideal for woodturners and woodworkers, giving complete protection, even when sanding. Can be used with Elipse models SPR501, SPR502 & Integra SPR406 Made in the UK.
