-
Gold colour box hinge with bow clasp suitable to make a lid for a cylindrical / round wooden box. Fits approximately 51mm spigot. -
Made from moulded latex rubber. Washable and reusable. 33mm long, 27mm diameter top to 20mm bottom with a 12mm hole. Add wood or acrylic handle. -
These pouches are economical yet present and protect your pen. -
Pedal wheel kit for the BDS250 Belt & Disc Sander. Ideal for moving the machine around the workshop. -
Sturdy floor stand for the BDS250 Belt & Disc Sander. -
for use with BDS150 for 6" x 4" Belt & Disc Sander -
Out of stock
The BS400 bandsaw offers high quality, industrial features and large capacities to the mid range bandsaw market. This machine brings affordable solid performance and reliability within reach of the discerning woodworker. Like all bandsaws in the range, a solid cast iron table provides unrivalled stability and solidity. An industrial style cast trunnion supports the table and allows it to be tilted one-handed on a rack and pinion. Dynamically balanced cast iron bandwheels ensure superior strength and reduced vibration - a feature not usually found on other machines at this level. The 2hp motor and 305mm depth of cut mean this machine can cope easily with large timbers yet is also equally capable of fine, precise cuts and veneers.
-
2pc bushing set for the 30 Caliber Bolt Action Pen Kits. -
Bushes suitable for Flat top twist pen (pack of 4).
-
Bushes suitable for Flat top Fountain pen & Flat top rollerball (pack of 4).
-
Skip tooth pattern to suit BS400. Also fits Axminster JBS180 & Jet JWBS18 -
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 8.5mm, 9.5mm & 10mm pens. -
Out of stock
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 7mm, 8.5mm, 9.5mm & 10mm pens.
-
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 7mm pens.
-
Allows precision insertion of pen mechanisms quickly and easily, eliminating risk of breakage. -
Self-centring design. Unique support and threaded rod design for accurate drilling. Holds and centres pen blanks up to 1-1/2 inch square. Quick and easy set up. -
Adjustable shaft allows the user to turn either one or two pen parts at a time, Supplied with shaft and spacers for 7mm pen kits plus cones to, accepts larger pen kits. Supplied with lock-nut kit for larger blanks.
-
Adjustable shaft allows the user to turn either one or two pen parts at a time, Supplied with shaft and spacers for 7mm pen kits plus cones to, accepts larger pen kits. Supplied with lock-nut kit for larger blanks. -
Out of stock
The new Colleted Pen Mandrel has been designed in the UK for pen turning professionals. Very similar to the Universal Pen Mandrel, its unique quarter-turn action clamps the shaft in place accurately and its completely dust free collet remains hidden.
-
The new Colleted Pen Mandrel has been designed in the UK for pen turning professionals. Very similar to the Universal Pen Mandrel, its unique quarter-turn action clamps the shaft in place accurately and its completely dust free collet remains hidden. -
includes: 3 x long series HSS tin coated drills: 6.8, 6.9 & 7mm, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x 7mm pen kits, cones and spacers to suit most sizes of pen kit -
Out of stock
NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit -
Out of stock
NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit
-
includes: 3 x long series HSS tin coated drills: 6.8, 6.9 & 7mm, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x 7mm pen kits, cones and spacers to suit most sizes of pen kit
-
Extra 3/8in Tubes for 30 Caliber Bolt Action Pen Kits.
-
This Bolt Action pen will be hard for anyone to put down. Every detail, from the bolt action mechanism to the precision engineered components, was carefully designed to ensure uniqueness and reliability. The realistic bolt-action handle smoothly advances and retracts to securely lock the refill in place. Includes a bolt action rifle clip and a replica 30 caliber cartridge and rose gold bullet tip for added authenticity. Assembley instructions included. (Assembled pen for illustration only.)
-
This Bolt Action pen will be hard for anyone to put down. Every detail, from the bolt action mechanism to the precision engineered components, was carefully designed to ensure uniqueness and reliability. The realistic bolt-action handle smoothly advances and retracts to securely lock the refill in place. Includes a bolt action rifle clip and a replica 30 caliber cartridge and rose gold bullet tip for added authenticity. Assembley instructions included. (Assembled pen for illustration only.)
-
A stylish flat top fountain pen with a screw fit.
-
Smooth 1/4 turn action. Tooling for the pen: 7mm mandrel shaft,bushing set 2 & drill bit 'O' (not included).
-
Innovation has been key to the progress of the Laguna brand and it is fully embraced here in the REVO 12/16 Midi Lathe. To overcome the issues of a traditional DC motor (Low torque at low speed and inability to achieve very low speeds) the controller uses the revolutionary Pulse Width Modulation system which feeds a succession of voltage pulses to the motor, monitoring the speed and automatically making adjustments to keep the speed constant. The result is a fantastic level of torque even at the incredibly low speed of 50rpm. The controls are mounted in an anodized aluminium plate, the ergonomic design is well positioned with a clear digital speed read out and easy access to all controls. The variable speed is smoothly controlled with a tactile rubber augmented knurled aluminium dial - A joy to use. Supplied with 2MT four prong drive centre, 2MT revolving tail centre, 75mm (3") diameter faceplate, 1.8m power cable with UK 3 pin plug. -
Out of stock
The midi sized lathe continues to be Charnwoods' best seller. It is a size which can accomplish most of the projects turners are likely to try and is the largest lathe which can comfortably be moved off the bench when not in use. We have developed ours further this year to now include an indexing system on the headstock spindle as well as more robust electronics, specifically designed for UK voltage. The bed of the lathe is one-piece precision ground cast iron giving 14" between centres when working with our new heavy duty centres, which are supplied as standard. The bowl turning capacity of 12" diameter over the bed, requires a very low speed which is achieved using a converter and a DC motor. A clear LCD display shows the current RPM. The tool rest banjo is a cam-lock design for rapid adjustments with all metal components. The tool rest itself is our ever popular round bar made from hardened steel The headstock is hollow centred to allow for easy tool removal, the tailstock is also hollow and has automatic centre removal. Supplied with drive and tail centres 2MT, knockout bar, 6" toolrest with 5/8" shank, 3" diameter faceplate, tool holder, carrying handles and cable tidy. N.B. The distance between centres will vary and be dependent on the type of centres or accessories used. Maximum distance is 450mm (18"). -
The SABRE range of bandsaws are the next evolutionary step from the highly regarded and market-leading Record Power premium bandsaws. They have built on the success of their premium range by introducing some fantastic new features to the SABRE-350 to make a bandsaw that is more effective, accurate and easier to use than any other machine in its class. Featuring an 1100 W output (1 1/2 horsepower) motor coupled with the heavy-duty cast iron band wheels, the SABRE-350 packs a real punch and can handle cuts to its full capacity with ease. The two speeds, which are slightly faster than comparable machines, make it ideal for cutting non-ferrous metals as well as wood. The cam-action fence adjustment, spring-loaded guides, cam-action blade tension release and double-sided fence mount make this a machine that is so easy to setup and use it leaves you free to concentrate fully on the project at hand.
