-
Roman Plastic numerals in gold. -
Out of stock
Deep orange-brown timber with broad medullary rays creating a flame pattern on quarter cut faces or numerous spots on flat sawn surfaces. Hard and heavy with a slightly coarse texture. -
Deep orange-brown timber with broad medullary rays creating a flame pattern on quarter cut faces or numerous spots on flat sawn surfaces. Hard and heavy with a slightly coarse texture.
-
Rosewood colour stained wooden display box for 7mm pens, in white carton for protection. -
Rosewood colour stained wooden display box for 7mm pen, in white carton for protection. -
Roupala Lacewood is light pink to silvery sheen with small flaky grain due to the large rays. Attractive pattern when used in small areas. Fairly light in weight, works well with hand tools. Central and South America. -
Boiled linseed oil is used for finishing most bare timber and suitable for replacing the natural sheen that wood can lose after long periods drying in the sun. Boiled linseed oil contains special additives which speed the drying process. Will also waterproof ground sheets and tarpaulins. -
A blend of natural plant oils to nourish and protect chopping boards and worktops. It penetrates the wood with no surface film to chip. It has a clear finish to enhance the natural beauty of wood. The Oil contains anti-microbial additives with a slow release formula which provide protection against a wide range of bacteria including E-coli and MRSA. Rustins Chopping Board Oil conforms to The Articles in Contact with Food Regulations. -
A unique formulation developed by Rustins that is suitable for all types of wood. It differs from Teak Oil in that it contains special ingredients to give it a low lustre finish. It is an easy to use wipe on finish, which brings out the beauty of the timber and gives a natural, open grained, soft lustrous finish. Ideal for all woods and is excellent on turned woodwork. Danish Oil conforms to The Articles in Contact with Food Regulations and to the Toys (Safety) Regulations 1995, BS:EN71 Part 3.
-
Removal of Plastic Coating from brushes, rollers and application equipment. Also used to thin Plastic Coating when necessary if it is to be sprayed. Also used to thin the product when an opened grained oil type finish is required. -
Worktop Oil is a unique water-borne blend of natural plant oils and other special ingredients which nourishes and protects all types of timber. It is a quick-drying wooden work surface treatment, leaving a durable and water-resistant seal which is not vulnerable to scratching or chipping. Plant oils used in its formulation originate from sustainable sources. One litre will cover around 13 square metres per coat depending on the absorbency of the wood.- Water based & quick drying
- For all solid wood worktops
- Low odour
- Food safe
- Natural finish
-
for use with BDS150 for 6" x 4" Belt & Disc Sander -
for use with BDS150 for 6" x 4" Belt & Disc Sander
-
Chrome sierra twist ball pen kit. A stylish one-piece elegant looking twist pen. For this pen use sierra bushing set and 27/64 drill bit. -
A stylish one-piece elegant looking twist pen. For this pen use sierra pen bushing set and 27/64 drill bit. -
Bushes suitable for Sierra twist pen (pack of 2). -
The outer chapter ring and decorative hands display the hours and minutes. Just above the figure six, a second dial ticks off the seconds. A quartz movement drives the exposed inner workings making a very attractive clock. The skeleton clock comes fully assembled and ready to mount in a frame or base of your making. -
Very high viscosity formula, super thick and super strong. Allows approximately 30 - 40 seconds for positioning. Cures in 90 seconds, ideal for gap filling. Use zip kicker to accelerate cure time. -
Small-scale turning is one of the most exciting challenges available to the wood turner, and offers a vast range of possibilities, from small vases and boxes to scale models of furniture and machinery. This book tells you all you need to know in order to get started on this absorbing craft: how to season and store your wood, how to choose the appropriate tools, and even how to make some tools for yourself, which is not as difficult as it sounds. Compared to other forms of turning, small-scale work is economical in terms of materials and equipment, and small pieces are easier to sell than large ones. But above all, small-scale turning is fun! The following attractive projects are covered in step-by-step detail: turquoise and tulipwood vase, metal-foil bowl with stand, miniature table, lidded box with finial, alabaster vase, lathe, spinning wheel, and fountain pen. This is a no-nonsense guide to the tools, materials and skills for miniature scale wood turning, assuming no previous knowledge of the craft. -
pack of 10 -
Stainless steel pizza cutter. Turn a handle to create a useful pizza cutter, cutter diameter 100mm, overall length wheel and tang 150mm . -
Stainless steel salad server spoon and fork. Overall length from tip of tang to end of spoon or fork 150mm. Simply add a wooden handle. -
Sheffield stainless steel stamped bread knife blade, length 200mm, overall length 245mm including tang. Simply add wooden handle. -
Sheffield stainless steel stamped butter knife blade, length 100mm, overall length 145mm including tang. Simply add a wooden handle. -
Sheffield stainless steel stamped cheese knife : large blade length 110mm, overall length 150mm including tang. small blade length 75mm, overall length 107mm including tang. Simply add a wooden handle. -
Sheffield stainless steel stamped pie knife blade : large = length 145mm, overall length 185mm including tang. small = length 75mm, overall length 117mm including tang. -
This stand and wheel kit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis. -
Sturdy floor stand for the BDS250 Belt & Disc Sander. -
The original Stebcentre is an invaluable accessory for every woodturner. Fitted in the lathe head-stock it is a boon for both the novice and the experienced. Its ring of sharp teeth ensure that the Stebcentre bites the wood to give more security and more drive. Because there are several points of contact there is minimal risk of splitting. The Stebcentre can be used with equal confidence on both soft and hardwoods as well as synthetic materials. In its patented design the Stebcentre also features a spring-loaded point. By slightly backing off the tail-stock the work piece still remains resting between the revolving centre and the Stebcentre. This allows the turner to inspect his work without the need to switch off the lathe. Where time is a critical factor the Stebcentre is ideal as the work-piece can be quickly removed without stopping the lathe. Overall length: 4". Patent No. 2286138
