-
Stainless steel pizza cutter. Turn a handle to create a useful pizza cutter, cutter diameter 100mm, overall length wheel and tang 150mm . -
Sheffield stainless steel stamped bread knife blade, length 200mm, overall length 245mm including tang. Simply add wooden handle. -
With 28 LED bulbs mains powered, Charnwood's magnetic base light is ideal for any situation where better lighting is required. The flexible arm is 370mm long and is fixed onto a magnetic base that can be turned on and off allowing the LED light to be securely attached to any steel or cast iron base. With 28 LED lights it produces better light than many with the added advantage of emitting very little heat. There is a seperate on / off switch for the LED light and it runs off a standard 240v, 13amp socket and comes complete with a 1.2m cable. Ideal for use with;- Bandsaws
- Lathes
- Pillar drills
- Scroll Saws
- Underpinners
Specification
Number of LEDs 28 Brightness 180 Lumens Shaft Length 370mm Weight 1.4kg Rating Trade Warranty 1 Year -
The Diamond Point cutter has 15mm long edges, perfect for fine detailing, deep vee cuts, and the side edges can refine convex curves. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
The Square Tip tool features a 15mm square cutting tip, each side having a very slight radius. It can remove quite a lot of material quickly. On the other hand it is more than capable of delicate refining cuts, flat or at a shear angle. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
The Round Carbide cutter turning tool has a circular cutting tip, 15mm in diameter. The profile makes it ideal for cutting coves in spindle work. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
Out of stock
Purpleheart has a creamy white/gray sapwood but like its name suggests, the heartwood is a bright, striking purple when freshly cut, darkening into a deeper purple with age. It has a medium to fine texture with a lustre that ranges from medium to high; its grain is usually straight but can be wavy or irregular. Purpleheart has high bending and crushing strength and stiffness with medium resistance to shock loads. -
When freshly cut the wood is bright orange red, becomes reddish brown. Moderately hard and heavy. Medium texture, but with large pores. -
Pink ivory wood dries slowly and doesn't split easily due to its high oil content. Its attractive colouring makes it ideal for carving, turning, inlay work and even musical instruments. -
Cocobolo has a high mechanical strength in all categories, and is heavy, tough and strong. It works reasonably well with hand tools, but cutting edges must be kept sharp. -
Roupala Lacewood is light pink to silvery sheen with small flaky grain due to the large rays. Attractive pattern when used in small areas. Fairly light in weight, works well with hand tools. Central and South America. -
Bocote is a wood that resembles rosewood and hence it is often called Mexican rosewood. It is found throughout much of South America and Mexico. It is used for turning, inlays, furniture, tool handles, cabinetry, decking and veneers. -
Out of stock
The wood has good wearing properties and resistance to abrasion because of its interlocked grain and twisty nature. Olive does polish to an excellent finish. -
Zebrano is a hard, dense and heavy wood with high strength properties and very high stiffness. It works well with hand tools and in most machining operations. Planing can be tricky, since interlocked grain can tear badly, so sanding is advised for a final finish. Gluing is satisfactory if care is taken. -
Stainless steel salad server spoon and fork. Overall length from tip of tang to end of spoon or fork 150mm. Simply add a wooden handle. -
Out of stock
Record Power's powerful work lamp is a perfect addition to any workshop. The long flexible neck allows it to be positioned to illuminate even the most hard-to-reach areas and get rid of troublesome shadows, giving a clear view of the work in progress. To further increase the lamp’s flexibility, a sliding collar on the lamp head allows either a spotlight or floodlight beam to be created. The strong magnetic base and magnetic side clip mean the light can be secured virtually anywhere on a machine. Powered by either standard AA batteries or a USB rechargeable lithium battery, this lamp gives hours of uninterrupted use and is ideal for a wide variety of machines such as scroll saws, bandsaws, sharpening machines, lathes and many more.Includes:• Magnetic base• Magnetic side clip• AA and Lithium battery holders• Micro USB-A cable -
Sale!
This brand new lathe from Record Power represents the culmination of many decades of expertise in the manufacture and supply of superior woodturning lathes. Developed with the help of professional woodturners and keen hobbyists, Record believe they have produced a world-class machine for woodturners of all levels. Thanks to a number of innovative design solutions the capabilities, features and performance of the Herald far exceed anything a machine of this size has been capable of before - It brings top-end professional performance at a fraction of the size and cost of comparable heavy-duty machines.To reflect the Record Power heritage in a modern context, the look of the lathe incorporates the elegant and balanced curves of the earlier Coronet series in a more streamlined and efficient form. As well as looking great, the Herald feels great - the excellence of engineering, ergonomics and quality manufacturing can be felt throughout, making the lathe a pleasure to use whilst delivering rock solid performance.
-
Sale!
Tubular leg stand for the Coronet Herald. -
Sale!
Adds 407 mm extra capacity between centres to the Coronet Herald lathe. -
Sale!
To fit the Coronet Herald, giving extra height when mounted to a bench or leg stand. -
With a cast iron table at the heart of this compact machine it is designed to offer those with limited space or budgets a real bandsaw with sensible capacity and performance, as an alternative to lightweight hobby machines. The BS250 should not be confused with the lightweight hobby machines available in the market at a similar price. It shares the same essential build qualities as its larger cousins – strong steel frames, dynamically balanced bandwheels, cast iron tables and an induction motor. It has been designed to offer the user with space restrictions a serious machine in compact form. The machine can be bench mounted or fitted to the optional stand and wheel kit, providing great flexibility in a tight space.
-
Record Sabre-250 10" Bandsaw, by taking the most relevant features from the existing SABRE series and applying them to the BS250, Record believe they have produced the best benchtop bandsaw available on the market below £400 / €500. In addition, the capacities, power and performance upgrades, combined with the unique SABRE features now found on this machine, make it a real contender in the general purpose floor-standing bandsaw category when combined with the BS250-AW stand and wheel kit. In this configuration it has quality and features well ahead of many of the lower cost floor-standing machines available in the market. The end result is a premium-quality, affordable bandsaw which retains the compact size of the BS250 while offering improved capacities, usability, accuracy and performance.
-
This stand and wheel kit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis. -
Twist Pen with double bead centre ring, black clip.
