-
Crown Parting Tools are a range of parting tools to suit all projects. -
3" velcro (hook and loop ) backed abrasive sanding discs. Designed to be used in a power drill. Available in 80G, 120G, 180G, 240G, 320G & 400G. -
M42 Razor Edge 3/16" Diamond Parting Tool combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Accelerates Super Glue cure time. Best working accelerator for ZAP. Sets in just a few seconds. -
These tools are made specifically for producing rings that are captured by the workpiece and feature a double bevel which results in only one tool being necessary to complete a ring. -
5 plastic presentation boxs. Each with a clear plastic lid & red pad, complete with protective sleeve. -
End Seal is an emulsified paraffin wax used the seal the ends of freshly cut timber to slow down the drying process and reduce the risk of the timber splitting. It can also be used on work-in-progress that is being left unfinished where there is a risk of the timber splitting. Apply it liberally, normally by brush but it can be sprayed if needed, usually to the smallest surface of the timber which will normally be the end grain where moisture is most likely to escape from. Sealing the surface will encourage the moisture to escape via the larger areas which will result in a slower exit. -
The wood is a red brown which is faintly pink tinged, occasionally with a blackish streak. The texture is medium to fine and even. It weighs 975Kg/m3 with the SG at 12%. It sands and finishes well. It is a hard timber with an attractive grain but turns well and produces a good finish. Tool must be kept sharp. -
The Round Carbide cutter turning tool has a circular cutting tip, 15mm in diameter. The profile makes it ideal for cutting coves in spindle work. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
This is the same wax Chestnut use in the tinned version of Microcrystalline Wax but in a solid block form with no solvent. This means there’s no waiting around for it to dry before buffing it.
Like the original version, this wax should be used very sparingly, a little goes a very long way and once applied it might even be necessary to spread it thinner using Safety Cloth (the texture of this makes it ideal for this purpose).
The Microcrystalline Wax Stick is also perfect for use on the Buffing Wheel System, use it on Wheel C to buff up to a brilliant, hard wearing finish. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
These pouches are economical yet present and protect your pen. -
When you need to protect your work but don’t want an overpowering shine on it, Acrylic Satin Lacquer is an ideal choice. With the benefit of an easy aerosol application, especially useful on awkward shapes, this is a hard wearing water based lacquer that will protect whatever it’s put onto, leaving an attractive satin sheen.
Acrylic Satin Lacquer is touch dry and dust free in about five minutes and hard dry about 20 minutes, ready for a second coat if needed after a light cut back with a fine abrasive.
For best results it should be used over either Cellulose Sanding Sealer or the Acrylic Sanding Sealer aerosol.
If you have a change of heart on the finish the lacquer can be brought to a gloss by using either Burnishing Cream or the Buffing Wheel Kit. Or you can simply apply a coat of Acrylic Gloss Lacquer!
-
Record SC4 Professional Geared Scroll Chuck Package with no insert is perfect for the demanding woodturner, being capable of holding large work pieces yet possessing the precision and compactness to handle more delicate work. This model features an enclosed back with full indexing plate and has pinions driven by a long ball ended hex key to make access easy, even when large work pieces are mounted. This chuck is an insert model which means it is easily future proofed against upgrades and can be used on multiple lathes, even if they have different spindle threads (additional optional inserts required).Supplied complete with the deep wood screw, 50 mm standard jaws, 2” faceplate this package offers professional performance at an exceptionally affordable price.Please order SC4 chuck insert to suit your lathe -
Connecting an extractor to a machine is no longer a struggle with this easy fit cuff on the end of the hose. It glides effortlessly onto any 100 mm outlet. -
Hampshire Sheen - Lacquer 500ml Aerosol have been formulated to be strong, flexible and very glossy. They can be used for both internal and external projects. Glass like finishes can be achieved with these two superb acrylic spray lacquer products. Supplied in 500ml cans with 2 nozzles. -
Stainless steel salad server spoon and fork. Overall length from tip of tang to end of spoon or fork 150mm. Simply add a wooden handle. -
Out of stock
Trend AIR PRO Airshield Pro Respirator Kit With 8hr Battery Suitable for use when machining MDF. The Air/Pro has been Approved to new standard BS EN 12941. Battery powered respirator for use with all woodworking applications. New features include: Combination face-seal and hood to improve protection. Motor positioned away from the sensitive area of the forehead to reduce noise and irritation. Strategic component distribution ensure optimum centre of gravity is achieved for balance and comfort. Twin filters with efficiency of 98%, more than double the Airshield MK1. Audible low battery warning. Removable 8 hour Ni-MH battery. -
Skip tooth pattern to suit BS250 & Sabre 250. Also fits RSBS10, Clarke CBS335, Nutool HBS14 -
WoodWax 22 contains beeswax (for shine) and carnauba wax (for hardness). Blended together in a solvent to produce a soft creamy paste. This makes it very easy to apply over any surface.
WoodWax 22 is quick drying enough to be applied onto unsealed wood but works best on one of Chestnuts sanding sealers.
If working on the lathe the wax should be applied with the lathe stopped.
Apply using a cloth (Safety Cloth or Stockinette works well with this); the wax spreads easily over the surface, after about 20 seconds it starts to drag slightly. This means it is ready to buff up; if you haven’t covered the whole piece by then don’t worry, just take a little more wax from the tin and carry on applying, the wax won’t mind waiting!
It’s best to buff WoodWax 22 as soon as you can; that way any surplus wax that might have been applied will be removed, allowing the shine to really show through.
If working on the lathe Safety Cloth should be used for the buffing process and let the lathe do the work for you. Off the lathe Safety Cloth or Stockinette can be used.
A second or even third coat of wax can be applied if required, leaving about twenty minutes between coats. After three coats the finish can become softer and will mark very easily.
-
Velcro backed 6" (150mm) wide rolls x 1/2 metre of each of the following grits: 120G, 180G, 240G, 320G, 400G & 600G -
Fine finishing starts with good preparation! Use these mildly abrasive pads after sanding for that final smoothing process to give a near-perfect surface prior to applying any finish. Very long lasting, these pads are also very flexible and do not crumble, thus avoiding any fear of contamination of your work. Exercise care when using these pads with the lathe revolving. -
The wood is a red brown which is faintly pink tinged, occasionally with a blackish streak. The texture is medium to fine and even. It weighs 975Kg/m3 with the SG at 12%. It sands and finishes well. It is a hard timber with an attractive grain but turns well and produces a good finish. Tool must be kept sharp.
-
This is an oil type finish similar to Danish oil but nothing like it. This product is designed to be hand rubbed on to raw timber, giving a finish with a hard, bright, high gloss. It will bring out amazing depth and brilliance to most timbers making the grain pop and become opalescent, vibrant, shimmering and alive. Especially when used on a fine grained, highly figure timber. And if that's not enough it does it all in a matter of minutes.
Aussie Oil is ideal for use on most small items like pendants, brooches, earrings, small turned items that cannot be fully finished on the lathe. Pens, magnifying glass handles, compacts, key rings, letter openers, in fact almost anything made of wood you can comfortably hold in your hand to polish.
As an extra added bonus, it also works brilliantly as a friction polish on the lathe.
-
Hampshire Sheen - Inlays, metal powder and decorative sand inlays are a popular choice to team up with the CA glues. Powders supplied in 250g-350g bottles, Sands in 250g & 350g shakers. -
Cut’n’Polish is a blend of two waxes with a fine abrasive held in suspension within them. This is a soft wax designed to stay ‘wet’ slightly longer during application, allowing it to lubricate the abrasive to give a very fine cut to the timber and also to collect any dust generated during use and some subsequent sanding, preventing it from entering the workshop atmosphere. On bare wood; sand to 240 grit as normal, apply a coat of Cut’n’Polish with the lathe stopped, then switch on the lathe and buff to a soft sheen whilst smoothing the timber at the same time. On sealed wood apply after the sealer in the same way, polishing to a slightly higher shine. Cut’n’Polish dries almost immediately and can be overcoated with Friction Polish or any Chestnut waxes for a higher shine. -
Very high viscosity formula, super thick and super strong. Allows approximately 30 - 40 seconds for positioning. Cures in 90 seconds, ideal for gap filling. Use zip kicker to accelerate cure time.
