Shop

  • The finest of Steel Wool, very low crumble and virtually oil free to ensure there is no contamination of your work. Use it after sanding with abrasive sheets to give an ultra smooth surface, or to apply waxes to smooth the timber whilst applying a thin coat. Steel Wool burns very quickly and easily; keep it away from sources of combustion (i.e. sparks etc). Always use a knife or scissors to cut Steel Wool
  • This bleached knitted cotton cloth is ideal for applying and buffing most products; the slightly coarse texture ensures that the applied coating is spread thinly, which is always preferable. Not recommended for use on the lathe.
  • Tack Cloths are coated with a special, sticky resin. The resin doesn’t transfer off the cloth but when you wipe it across a surface it picks up and dust and removes it, leaving behind a clean surface ready for finishing. This makes it ideal for use after your final sanding to make sure that all of the sawdust generated is removed and doesn’t affect your finishing. Tack Cloths are supplied in a sealed wrapper; once opened store them in an air-tight container to prevent them from drying out. Do not use Tack Cloth with the lathe running.
  • Tung Oil, or Chinese Wood Oil as it’s sometimes called, is a natural oil derived from the seed of the nut of the tung tree. The jury is out as to whether it can spark a nut allergy. Tung Oil air dries to form a tough, hard film that has a fairly strong amber tint. Because it doesn’t have any solvent or driers in it it can take a while to dry, and dependant on conditions this can be up to a week although 48 hours is more common. As with most finishes a thinner coat will dry quicker. Normally applied with a brush or cloth.
  • Woodturners stick wax is a mixture of beeswax and carnauba wax it is slightly softer than the Carnauba Wax Stick and therefore slightly easier to apply and there are no concerns about it marking softer woods. Applied over a sanding sealer, simply hold the stick against the revolving work and allow the heat generated to melt the wax onto the wood. Buff up straight away using Safety Cloth, using the cloth to ensure an even coating.
  • WoodWax 22 contains beeswax (for shine) and carnauba wax (for hardness). Blended together in a solvent to produce a soft creamy paste. This makes it very easy to apply over any surface. WoodWax 22 is quick drying enough to be applied onto unsealed wood but works best on one of Chestnuts sanding sealers. If working on the lathe the wax should be applied with the lathe stopped. Apply using a cloth (Safety Cloth or Stockinette works well with this); the wax spreads easily over the surface, after about 20 seconds it starts to drag slightly. This means it is ready to buff up; if you haven’t covered the whole piece by then don’t worry, just take a little more wax from the tin and carry on applying, the wax won’t mind waiting! It’s best to buff WoodWax 22 as soon as you can; that way any surplus wax that might have been applied will be removed, allowing the shine to really show through. If working on the lathe Safety Cloth should be used for the buffing process and let the lathe do the work for you. Off the lathe Safety Cloth or Stockinette can be used. A second or even third coat of wax can be applied if required, leaving about twenty minutes between coats. After three coats the finish can become softer and will mark very easily.
  • These cotton wheels come  complete with the fixings needed to attach them to the mandrels in the Buffing System. Use Wheel A with Compound 1 for a preparatory cutback Use Wheel B with Compound 2 for an ultra fine surface prior to waxing Use Wheel C with Carnauba Wax Stick, Microcrystalline Wax or Microcrystalline Wax Stick.
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • Shellac Sealers are used in the French polishing trade either; as a quick drying finish to seal timber after staining; or as a basecoat for subsequent coats of French Polish.
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • Wax Filler Sticks are blended wax filler used to repair cracks, splits and small to medium-sized holes without sanding or having to strip the finish. Available in a wide range of intermixable wood colours, they can be applied without a heat source, are quick drying and have no shrinkage making them ideal for use on finished furniture and other articles.
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • An exciting and vibrant set of colours for staining wood, Spirit Stains are methanol based to make them quick drying and because of this they also will not raise the grain of the timber they are applied to. The pigments used to make this stains are of the highest quality and all score the top ratings of 7s and 8s in the Blue Wool Scale, the measuring system used to rate fade resistance. This means you can use them with confidence knowing that the colour you apply will still be the same many years later. Spirit Stains are fully inter-mixable so you can produce virtually any colour you can think of, giving you full opportunity to be as creative as you wish. The colours will also mix after application so you can blend from one colour to another for fantastic ‘flare’ effects. Spirit Stain White is designed primarily as a mixer to create pastel shades when mixed with other Spirit Stain colours. It can be used to stain timber but as it is a translucent stain this can have a limited effect depending on the base colour of the timber used. Should you want a more subtle colour you can dilute the stains with Spirit Thinners for a delicate wash effect.
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • The ideal way to experiment with the different colours available to decide which ones you prefer, the Spirit Stain Kit contains one bottle (min. contents 25ml) of each of the nine colours. These are exactly the same stain as in the bigger bottles and will intermix if you want to vary the shades available.
    The stains are very fade resistant, quick drying and non-grain raising.
  • Stems

    £12.98
    This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9"as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available in ½", ⅝", ¾", ⅞", 1", 25mm, 28mm and 30mm diameters to fit most popular lathes. The same stems are compatible with the Precision Boring System.
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • Stebcentre

    £61.26£71.48
    The original Stebcentre is an invaluable accessory for every woodturner. Fitted in the lathe head-stock it is a boon for both the novice and the experienced. Its ring of sharp teeth ensure that the Stebcentre bites the wood to give more security and more drive. Because there are several points of contact there is minimal risk of splitting. The Stebcentre can be used with equal confidence on both soft and hardwoods as well as synthetic materials. In its patented design the Stebcentre also features a spring-loaded point. By slightly backing off the tail-stock the work piece still remains resting between the revolving centre and the Stebcentre. This allows the turner to inspect his work without the need to switch off the lathe. Where time is a critical factor the Stebcentre is ideal as the work-piece can be quickly removed without stopping the lathe. Overall length: 4". Patent No. 2286138
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • Largely inspired by Norwegian turner Petter Herud a series of Revolving (or Live) Stebcentres has been introduced. Not only do these offer the same degree of security as the conventional Stebcentre, but they have allowed the turner to experiment with basic off-centre turning. Visit www.robert-sorby.co.uk to download instructions on how to produce multi-sided dishes and bowls.
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • Tool Rest Crossbars

    £23.34£31.69
    Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish.
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • Twist Pen with double bead centre ring, black clip.
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • 7mm Twist Pen with a decorated centre ring, tapered ball end black clip.
  • Out of stock
    7mm Twist Pencil with a decorated centre ring, tapered ball end black clip.
  • Smooth 1/4 turn action. Tooling for the pen: 7mm mandrel shaft,bushing set 2 & drill bit 'O' (not included).
  • Blanks are supplied in a square block form, 150mm x 20mm x 20mm. Each blank is unique and pictures indicate pattern/colour, purchased items are subject to slight variations.
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • 5 plastic presentation boxs. Each with a clear plastic lid & red pad, complete with protective sleeve.
  • Maple pen box with rosewood ends, in a white carton for protection.
  • 24K Golf Club Clip

    £1.25£5.75
    24K Golf Clup Clip
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • 24K Rifle Clip

    £1.25£5.75
    24K Rifle Clip
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • 24K Religious Cross Clip

    £1.25£5.75
    24K Religious Cross Clip
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • 24K Jonah Clip

    £1.25£5.75
    24K Jonah Clip
    Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
  • These pouches are economical yet present and protect your pen.
  • includes: 3 x long series HSS tin coated drills: 6.8, 6.9 & 7mm, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x 7mm pen kits, cones and spacers to suit most sizes of pen kit
  • Out of stock
    NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit
  • Out of stock
    NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit
Go to Top