-
Crown Square End Scrapers are ideal for finishing both flat bottomed and convex projects. The square blade can also be shaped by the user to suit their own requirements. -
Spiralling/Texturing system includes 1 x 18 tooth texturing wheel, 1 x 18 tooth spiralling wheel and 1 x 30 tooth spiralling wheel. -
Crown Spindle Gouges are their range of milled regular English gouges, are available in their range to suit all requirements for Spindle work. -
Out of stock
Another 'Crown' special, this long boring tool is made completely from High Speed Steel with a spiral flute, which results in removing wood easier and quicker than ordinary Augers. -
These unique tools were developed with the help of 'Bill Jones' and come with a full instructional brochure. -
Crown Round Nose Scrapers are perfect for achieving a smooth finish after shaping has been completed by other tools. -
Crown roughing out gouges are traditionally made hot forged gouges are ground and finished by hand. The ideal tools for preliminary work to produce a round shape from square edge spindle stock.
-
With a dual bevel 'Cryogenic High Speed Steel' ring, these tools provide a superb finish when hollowing into end grain. Flat or curved shapes can be accommodated easily. -
When making CrushGrind peppermills it is necessary to create an accurate recess within the mill body, into which the mechanism clips, retaining it in place. This tool from manufactured from High Speed Steel, is specifically designed to cut a suitable recess.
-
Crown Parting Tools are a range of parting tools to suit all projects. -
Specially developed to allow the blade to move more easily along the tool rest than normal rectangular shaped chisels. -
Crown Multi Tip Scraper offers a range of scraper shapes on one handle. Round, square and pear shaped cutters.
-
Out of stock
Crown Hand Tools Miniature Spiralling system, complete with a 17 and a 27 tooth wheel.
-
Crown Forged Spindle Gouges range of European style are tools in their range to suit all requirements for Spindle work.
-
Crown Diamond Parting Tools are a range of parting tools to suit all projects. -
Crown's H.S.S. Shallow flute 'Detail' Gouges are ideal for cutting coves and beads. The shallow flute permits a smoother cut and gives less vibrations due to more metal being under the flute. -
These unique tools developed by the well respected North American woodturner, Dave Hout, are used for making finished cuts when producing bowls. The cut is shear and leaves the end grain smooth. With practice, sanding can be all but eliminated. The two tool set consists of one tool with a deeper flute to be used on bowls up to 5" -6" in diameter. The shallower tool is for use on bowls 6" and larger in diameter. -
The Square Tip tool features a 15mm square cutting tip, each side having a very slight radius. It can remove quite a lot of material quickly. On the other hand it is more than capable of delicate refining cuts, flat or at a shear angle. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
The Round Carbide cutter turning tool has a circular cutting tip, 15mm in diameter. The profile makes it ideal for cutting coves in spindle work. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
The Diamond Point cutter has 15mm long edges, perfect for fine detailing, deep vee cuts, and the side edges can refine convex curves. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
These tools are made specifically for producing rings that are captured by the workpiece and feature a double bevel which results in only one tool being necessary to complete a ring. -
Sale!
Designed in conjunction with the professional British woodturner, Albert Harrison, this tool is excellent for cleaning out small boxes and goblets, giving an extremely clean finish. -
Recognised as being amongst the best available worldwide, Crown Bowl Gouges have the edge and balance needed for the finest projects. -
Crown Beading & Parting Tool form part of the range of parting tools to suit all projects.
-
The Splay tool can be used as a skew chisel, a box scraper, a shear scraper and also for detail work on spindles.
-
Crown 3/4" Side Cutting Scrapers are designed specifically for finishing bottoms of bowls and boxes.
-
Crown 3/16" Fluted Parting Tool (5mm) is part of the range of parting tools to suit all projects.
-
Crown 1" x 3/8" Heavy Duty Scrapers help to keep vibration to a minimum. -
For removing ridges on the inside of the bowl. -
Out of stock
Crowns heavy duty Scrapers 1 1/2" 38mm x 3/8" 10mm help keep vibration to a minimum.
-
Designed for deep hollow forms these tools have a polished H.S.S. adjustable top section which gives complete control on the depth of a cut.
-
1” diameter 4 prong head. Head relieved behind flutes to prevent binding. Supplied with inter-changeable point, pilot and hex key. -
Regent Variable Speed Lathe is the largest lathe in the exclusive range of Coronet lathes from Record Power and is ideal for the woodturner who regularly needs the power, stability and capacities necessary for very large scale work. It is supported by large and heavy integral cast iron legs to give ample protection from vibration while turning out of balance timbers. The overall heavy-duty construction of the machine, along with the finely engineered and machined components make this lathe a pleasure to use.
-
Tubular leg stand for the Coronet Herald. -
This brand new lathe from Record Power represents the culmination of many decades of expertise in the manufacture and supply of superior woodturning lathes. Developed with the help of professional woodturners and keen hobbyists, Record believe they have produced a world-class machine for woodturners of all levels. Thanks to a number of innovative design solutions the capabilities, features and performance of the Herald far exceed anything a machine of this size has been capable of before - It brings top-end professional performance at a fraction of the size and cost of comparable heavy-duty machines.To reflect the Record Power heritage in a modern context, the look of the lathe incorporates the elegant and balanced curves of the earlier Coronet series in a more streamlined and efficient form. As well as looking great, the Herald feels great - the excellence of engineering, ergonomics and quality manufacturing can be felt throughout, making the lathe a pleasure to use whilst delivering rock solid performance. -
Adds 407 mm extra capacity between centres to the Coronet Herald lathe. -
To fit the Coronet Herald, giving extra height when mounted to a bench or leg stand. -
The central locating pin of the drive centre retracts into its body when pressure is applied from the lathe tailstock, leaving the ring of teeth around the circumference to hold the workpiece extremely securely, with clamping pressure spread evenly across the teeth. The retraction of the locating pin means it cannot split the timber, making it ideal for use with smaller and more delicate work.The locating pin tension is adjustable, allowing for lower tension to be set for small, delicate workpieces and higher tension for use with hard woods and large timbers.Another key benefit of this design is that the workpiece can be removed from the lathe if required and easily repositioned, using the indentations created by the locating pin and ring of teeth as an accurate guide. -
- The multi-tooth drive centres feature a ring of teeth around the circumference of the tip, with a central drive point to give accurate positioning. This design gives an extremely strong grip, thanks to the many points of contact in the timber, which also minimises the risk of splitting the timber.
-
- The design of the 6-prong drive centres offers an enhanced grip to timber using the principle of opposing tooth profiles. The central point of the tool secures the drive centre in place, the six teeth around it grip the timber securely and the opposing tooth pattern ensures the wood fibres are pulled together to reduce the chance of splitting. Having two more teeth than the traditional 4-prong drive centres, they are ideal for use on hardwoods and larger pieces of wood.
-
This live centre kit gives woodturners a huge amount of flexibility, allowing for a wide range of work to be undertaken. The finely engineered live centre body features two sealed-for-life bearings for faultless, smooth performance. The high-precision manufacture ensure that the tips are a perfect fit in the live centre body and a rubber O-ring holds them in place securely. The tips are easily removed from the lathe tailstock using the supplied knockout bar. In addition to the many operations the tips make possible, the live centre body itself can be used to carry out long hole boring – with no tips fitted, it acts as a ring centre to support the workpiece and the body is fully bored to accept the standard 5/16” (8 mm) long hole boring augers.
Coronet Falcon Interchangeable Live Centre Traditional Tip
This traditional design features a 60º tip, to give effective penetration into the workpiece, supporting large timbers well. It is ideal for use on spindle work and can also be used to support headstock-mounted bowls and larger vessels from the tailstock. Internal support can be given to pre-bored timbers with bores from 1 to 43 mm in diameter, across the full range of the live centre cone taper.
Coronet Falcon Interchangeable Live Centre Detail Tip
This elongated single-point tip gives greater access to the workpiece at the tailstock - ideal for removing the bottoms of bowls, creating small dowels and much more. The tip is angled at 90º rather than the traditional 60º, ensuring the load is spread across a larger area, reducing the chance of splitting small, delicate workpieces.
Coronet Falcon Interchangeable Live Centre Multi-Tooth Tip
This multi-tooth live centre tip features a ring of teeth around the circumference, with a central drive point to give accurate positioning. This design gives an extremely strong grip, thanks to the many points of contact in the timber, which also minimises the risk of splitting the timber.
As the grip is spread across many small teeth rather than 4 or 6 prongs, it is possible to grip the timber sufficiently just by using the clamping pressure of the lathe tailstock.
Another benefit of this design is that your work can be removed from the lathe and accurately repositioned, using the markings created in the timber by the centre point and ring of teeth as an accurate guide.
This tip also gives a fantastic grip to paper-joint wood blanks, as the ring of teeth grip on many points across the drive’s circumference across both sections of wood on either side of the joint.
It makes an ideal partner to the range of Coronet Hawk Multi-Tooth Drive Centres, allowing timber to be held securely at both ends of the lathe quickly, easily and accurately.
Coronet Falcon Interchangeable Live Centre Pen Turning Tip
The pen turning tip is a game-changer for pen turners. Rather than use the screw at the tailstock end of the pen mandrel to secure the pen blanks, mechanisms and spacers in place, the pen turning tip simply slides over the mandrel and registers against the spacers. Tailstock clamping pressure is then used to secure the pen components in place between the headstock and tailstock.
This method means that no pressure is applied to the mandrel itself, eliminating the risk of bowing the mandrel which can cause the final pen to have uneven wall thickness, which in turn stops the pen’s components aligning correctly. Using the pen tip will help you create the most accurate and well-made pen possible. In addition, this method is fast, easy and secure, making it a great time-saving operation for prolific pen turners.
-
This ring centre features two high quality sealed-for-life bearings, giving extremely smooth rotation. The ring design gives a larger area of contact than a traditional live centre for an increased grip. This makes it ideal for supporting small or brittle timbers and works very well with paper-jointed blanks, giving a strong grip to both pieces of timber either side of the joint. Another great advantage of this design is that workpieces can be removed and refitted to the lathe accurately, thanks to the positive location of the centre point and ring, which can be used for easy registration. -
This live centre features two high quality sealed-for-life bearings, giving incredibly smooth rotation and the 60º point is optimised to give the best grip possible from a single point of contact. It is ideal for use on spindle work and can also be used to support headstock mounted bowls and larger vessels from the tailstock. -
Part of the exclusive range of Coronet lathes from Record Power, the Envoy is perfect for the woodturner who regularly needs the power, stability and capacities necessary for large scale work. Designed as a natural progression from the Coronet Herald, it is supported by large and heavy integral cast iron legs to give ample protection from vibration while turning out of balance timbers.
The overall heavy-duty construction of the machine, along with the finely engineered and machined components make this lathe a pleasure to use. -
The cast iron outrigger for the Coronet Envoy and Coronet Regent allows for the full capacity of the lathe to be used when turning bowls with the head swivelled. -
Adds 525 mm to the between-centres capacity of the Coronet Envoy and Coronet Regent. -
This book will guide you through the various health and safety issues, the tools and equipment needed to get the best out of your woodturning, mastering the basic techniques and how to add decorative features. Nick Arnull illustrates how to use highly original decorative methods and artistic skills to complete the finished projects. Each project includes easy-to-follow instructions and detailed photography to inspire you to take what you have learnt and apply these skills to your own work. -
Get fired up and learn the latest! Whether you’re new to pyrography or a skilled artisan, you’ll want this newest edition of Stephen Poole's bestseller, The Complete Pyrography. It is the go-to resource for learning the latest on the craft and includes features on the best pyrography artisans and an extensive gallery of their artwork. All new, and completely revised. This bestselling, classic resource and reference book is better than ever and a must-have for anyone interested in this popular craft. It covers all this and more:- Improved best practices
- Required materials and equipment for creating “burnt wood art decoration”
- An inspiring collection of artwork depicted in stunning color photographs
- Invaluable tips on how to display and market your art for sale
- A history of pyrography
- How-to techniques
- Step-by-step instructions
- Essential skills
- Hot wire and solid point methods
- Color work
- Gouache: pros and cons
- Watercolor
- Wood stains
- Directions for working on woodturned objects
- How to protect and professionally finish your work
-
The Compendium of Wooden Wand Making Techniques is here to show you how simple making wands can be – no mysterious magic necessary! In the first-ever guide for muggles to making wands, you’ll learn how to hand carve, power carve, wood turn, and scroll saw 20 unique projects that are sure to delight and manage mischief. Be inspired with a gallery of beloved staff-carrying and wand-wielding characters from the infamous Harry Potter and Lord of the Rings series, then use the Wand Sketchbook section to design your own original wands! From there, five wand projects for each woodworking technique are presented with step-by-step instructions, coordinating photography, and patterns. Conjuring up wooden wands might seem like a magical and mysterious process, but the Compendium of Wooden Wand Making Techniques is here to show you how simple it can be! In the first-ever guide to making wands, you’ll learn how to hand carve, power carve, wood turn, and scroll saw 20 unique projects that are sure to delight and manage mischief. Be inspired with a gallery of beloved staff-carrying and wand-wielding characters from the infamous Harry Potter and Lord of the Rings series – from Albus Dumbledore, Hermione Granger, and Severus Snape to Gandalf, Saruman, and several others. Woven throughout these gallery pages are images of wands you can make in the book that are thematically similar – but distinct from – these iconic wands and staffs! Also provided is a Wand Sketchbook section as a jump-off point for you to design wands of your own, along with areas to include your original wand’s name, wood type, length, core, and special skills. From there, five wand projects for each woodworking technique are presented with step-by-step instructions, coordinating photography, and patterns. A complete project collection that’s truly the first of its kind, this book is a must-have source of inspiration that belongs in any muggle’s and woodworker’s library who has a love for all things fiction and fantasy! -
5" x 3/4" x 3/4" colourwood pen blank -
Only the heartwood of cocobolo is used; it is usually orange or reddish-brown, often with darker irregular traces weaving through the wood. The heartwood changes colour after being cut, and can be polished to a lustrous, glassy finish; being quite dense, sometimes having a specific gravity of over 1.0, it will sink in water. The sapwood (not often used) is a creamy yellow, with a sharp boundary between it and the heartwood.
-
Cocobolo has a high mechanical strength in all categories, and is heavy, tough and strong. It works reasonably well with hand tools, but cutting edges must be kept sharp. -
Out of stock
Replacement cloth filter bag for the motors of CamVac extraction machines. -
36mm gold plated insertion watch. Roman numerals on a white dial. Supplied with rubber fixing band to fit aperture of approximately 34.5mm diameter x 6mm deep. -
35mm gold plated insertion watch. Roman numerals on a white dial. Supplied with a metal fixing cup and battery. -
160mm white dial with Arabic or Roman numerals, brass diamond turned bezel ring and domed glass clock insert. Requires a hole approximately 83-85mm diameter x 25mm deep to insert mechanism into.
