-
Gift Card available to use against any product or course. -
Bocote(Mexican Rosewood) is dark green brown timber with a white sapwood. Easily turned to a very fine finish. -
The wood is a red brown which is faintly pink tinged, occasionally with a blackish streak. The texture is medium to fine and even. It weighs 975Kg/m3 with the SG at 12%. It sands and finishes well. It is a hard timber with an attractive grain but turns well and produces a good finish. Tool must be kept sharp. -
The wood is a red brown which is faintly pink tinged, occasionally with a blackish streak. The texture is medium to fine and even. It weighs 975Kg/m3 with the SG at 12%. It sands and finishes well. It is a hard timber with an attractive grain but turns well and produces a good finish. Tool must be kept sharp.
-
A red/brown timber veined with darker red stripes. The wood is dense, with a straight to sometimes interlocking grain which when turned has a fine even texture and polishes to a high finish. -
The light red-brown timber has a good figure oxidizing to a warm darker colour shortly after conversion, age improves appearance. Weight 770kg's/Ms with SG at 12% it is hard but sands and works well and takes a fine polish. An easy timber to turn although tools need to be sharp. -
The light red-brown timber has a good figure oxidizing to a warm darker colour shortly after conversion, age improves appearance. Weight 770kg's/Ms with SG at 12% it is hard but sands and works well and takes a fine polish. An easy timber to turn although tools need to be sharp.
-
A dark brown to sometimes nearly black wood with straight to interlocking grain. Hard and heavy with good working qualities. Turns and finishes well and takes a good polish. -
A dark brown to sometimes nearly black wood with straight to interlocking grain. Hard and heavy with good working qualities. Turns and finishes well and takes a good polish.
-
Out of stock
Heartwood is a vivid red when freshly cut, toning down to a medium to dark purple-brown on exposure, often with fine black lines. Sapwood is wide and greyish-white. Straight to interlocked grain with course texture. Finishes very well, tends to be dusty. -
Panga Panga is extraordinary in its rarity as it is only found, in commercially viable quantities, inMozambique. Its dark colours, with rich parenchyma bands brings a touch of the exotic to finished pieces. The heartwood is dark chocolate brown with paler broad bands. At 880kg/m3 the heartwood is extremely durable. It sands and finishes well. -
Panga Panga is extraordinary in its rarity as it is only found, in commercially viable quantities, inMozambique. Its dark colours, with rich parenchyma bands brings a touch of the exotic to finished pieces. The heartwood is dark chocolate brown with paler broad bands. At 880kg/m3 the heartwood is extremely durable. It sands and finishes well.
-
Deep orange-brown timber with broad medullary rays creating a flame pattern on quarter cut faces or numerous spots on flat sawn surfaces. Hard and heavy with a slightly coarse texture. -
The heartwood is light and dark chocolate brown. At 1010kg's/m3 the wood is hard, heavy, durable, close-grained and resistant to termites. When freshly worked it has a distinctive, sweetish smell.It sands and finishes well to a satin lustre. It is used in musical instruments, turning and carving. -
Wild Mango is a stunning deep cream coloured wood with golden undertones that creates its own ambience. The heartwood has a colour yellow brown to nut brown with a subtle but attractive grain pattern. Weighing 800Kg's/m3 the hardwood durable and logs that have been lying on the forest floor for decades produce high quality sawn boards. It sands and finishes well. It is used for turning and carving. -
Out of stock
Wild Mango is a stunning deep cream coloured wood with golden undertones that creates its own ambience. The heartwood has a colour yellow brown to nut brown with a subtle but attractive grain pattern. Weighing 800Kg's/m3 the hardwood durable and logs that have been lying on the forest floor for decades produce high quality sawn boards. It sands and finishes well. It is used for turning and carving.
-
African blackwood clarinet bell (reject). Dark purple-brown with black streaks, giving an almost black appearance. Generally straight grained with a fine even texture. Finishes exceptionally well. -
A red/brown timber veined with darker red stripes. The wood is dense, with a straight to sometimes interlocking grain which when turned has a fine even texture and polishes to a high finish.
-
Weight: 1100Kg/m3.One of the first and finest ebonies in common use and probably overused in the past. This stock is taken from new growth logs and is therefore subject to stringent export regulation that, along with the small log sizes somewhat limits the range of sizes that can be offered. -
Mopane is a very heavy, dense timber. Dark red/brown in colour generally streaked with black. Narrow straw coloured sapwood. Turns well with care and polishes to a lustrous finish. -
Heartwood is light golden-yellow with streaks and veining being dark brown to almost black. Sapwood is wide and grey-white with darker markings. Interlocked or wavy grain with course texture. -
Perforated design which allows the dust to escape without clogging. -
2" wide cloth backed abrasive available in six grits, 80G, 120G, 180G, 240G, 320G & 400G. -
2" wide cloth backed abrasive available in six grits, 80G, 120G, 180G, 240G, 320G & 400G.
-
2" velcro (hook and loop ) backed abrasive sanding discs. Designed to be used in a power drill but can also be used in the Robert Sorby Sandmaster. Available in 60G, 80G, 120G, 180G, 240G, 320G & 400G. -
Velcro backed 6" (150mm) wide rolls x 1 metre in 9 grits, 80G, 120G, 180G, 240G, 320G, 400G, 600G, 800G & 1200G -
3" velcro (hook and loop ) backed abrasive sanding discs. Designed to be used in a power drill. Available in 80G, 120G, 180G, 240G, 320G & 400G. -
Perforated design which allows the dust to escape without clogging. mixed pack of 15, 3 of each of the following 5 grits, 120G, 180G, 240G, 320G 400G, 70mm x 125mm.
-
Fine finish starts with good preparation! Use these mildly abrasive pads after sanding for a final smoothing process to give a near-perfect surface prior to applying any finish. Very long lasting, these pads are also very flexible and do not crumble, thus avoiding contamination of your work. -
2" Soft density tapered arbor for external and shallow internal curves Accepts all Velcro/loop backed abrasives including self or pre-cut squares and discs.- colour may vary
-
Fine finishing starts with good preparation! Use these mildly abrasive pads after sanding for that final smoothing process to give a near-perfect surface prior to applying any finish. Very long lasting, these pads are also very flexible and do not crumble, thus avoiding any fear of contamination of your work. Exercise care when using these pads with the lathe revolving.
-
Velcro backed 6" (150mm) wide rolls x 1/2 metre of each of the following grits: 120G, 180G, 240G, 320G, 400G & 600G
-
2" arbors 50mm x 6mm spindle pad with a 20mm foam, soft pad for external and shallow curves . Accepts all Velcro/loop backed abrasives including self or pre-cut squares and discs.- colour may vary
-
3" arbors 75mm x 6mm spindle pad with 20mm foam
-
1" x 20' abrasive in a convenient dispenser. Perfect for spindle, pen, or any turning where small strips are needed. This convenient dispenser is loaded with four or 1" x 20' rolls of cloth backed aluminum oxide abrasive. Each dispenser pack contains one roll of 150, 240, 320 & 400 grit abrasive. Just pull out and tear off the length of abrasive strip you need. -
1" x 20' abrasive in a convenient dispenser. Perfect for spindle, pen, or any turning where small strips are needed. This convenient dispenser is loaded with five 1" x 20' rolls of cloth backed aluminum oxide abrasive. Each dispenser pack contains one roll of 150, 240, 320, 400 & 600 grit abrasive. Just pull out and tear off the length of abrasive strip you need. -
2" velcro backed abrasive sanding discs & arbors, includes 6 x 47 arbors. 4 Spare pads (2 soft red, 2 normal). 20 each x 50mm indasa Velcro discs in grits, 120,180,240,320,400 & 600G -
Out of stock
Includes 1 x 72 arbor. Spare pads. 20 each x 75mm indasa Velcro discs in grits, 120,180,240,320,400 & 600G -
Long series sawtooth Forstner cutter Long series forstner bit (inch), sawtooth pattern, particularly suited for cutting down the grain. Long series - all sizes are a minimum of 150mm long, will produce over-lapping holes, resharpenable. -
Long series sawtooth Forstner cutter Long series forstner bit (mm), sawtooth pattern, particularly suited for cutting down the grain. Long series - all sizes are a minimum of 150mm long, will produce over-lapping holes, resharpenable.
-
The parabolic flute design clears the chips quickly. Precise when boring into end grain. Packed in reusable tubes with euro slot. -
Forstner Extension bar shanks are available in two sizes, to suit Planet's long series saw tooth forstners: 3/8" collar /200mm long Forstner Extension Bar. For sizes 3/8" to 2" 1/2" collar /280mm long Forstner Extension Bar. For sizes 2 1/4" to 4" -
Designed with an internal dovetail to fit securely onto the standard 2" (50mm) jaws. These rings work in the same way as normal faceplates but with the convenience of the easy chuck fitting. Available with an outer diameter of 3⅛" (80mm) and 4¾" (120mm). -
These extended jaws act like a pin chuck, expanding into a pre-bored hole. A useful technique for free form edge bowls as you don't have to bore an exact size as with other pin jaws. The longer jaws allow for a very powerful spigot grip for smaller work. Also features a small dovetail. Expansion 26 - 46mm Contraction square: 28 - 7mm Contraction spigot 31 - 10mm
-
Featuring a specialised dovetail profile, these jaws are ideal for turning large bowls, green timber and hollow vessels. They combine the profile of our previously popular 100 mm dovetail jaws with a deep body and internal teeth to improve versatility. The outer dovetail jaws are ideal for large bowls or platters, particularly when gripping onto a spigot and the deep internal toothed body is ideal for large spigots of large hollow vessels. Expansion: 94 - 114 mm Contraction Spigot: 76 - 95 mm Contraction Square: 54 - 74 mm -
Featuring a specialised dovetail profile, these jaws are ideal for turning up to 30” bowls. They also feature a reverse dovetail for a contracting grip on large spigots. Expansion: 125 - 145 mm Contraction Spigot: 104 - 123 mm Contraction Square: 74 - 94 mm . -
This faceplate ring is ideal for holding medium sized bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 50 mm jaw set which comes complete with all Record Power chuck packages. Must be used with: 62313 50 mm Standard Jaws (Supplied with SC3 and SC4 chucks) Diameter: 87 mm -
These jaws are a smaller version of the standard 50 mm jaws, featuring the same dovetail profile in expansion and the superb grip of the hawk beak design on contraction. Designed specifically for smaller spigots and recesses, this set is incredibly versatile and makes a great addition to any turner’s tool collection. Expansion: 38 - 58 mm Contraction Spigot: 28 - 47 mm Contraction Square: 16 - 37 mm -
This large faceplate ring is ideal for holding large bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 50 mm jaw set which comes complete with all Record Power chuck packages. Must be used with: 62313 50 mm Standard Jaws (Supplied with SC3 and SC4 chucks) Diameter: 100 mm -
These new jaws are ideal for heavy bowls and vases. The wide front face provides a good register for the base of the bowl or vase and the deep toothed body provides strong grip on the spigot. The internal gripper can also be used on smaller rough green timber. Also featuring an external dovetail in expansion, they can be used for large platters. A truly versatile and solid jaw set. Expansion: 81 - 102 mm Contraction Spigot: 46 - 65 mm Contraction Square: 33 - 54 mm -
These extremely flexible jaws feature internal and external dovetails for bowl work. The deep internal grip is versatile but main benefit of these jaws is to project the work away from the chuck, allowing good tool access to the base of the timber for cleaning and shaping. Expansion: 54 - 74 mm Contraction Spigot: 38 - 58 mm Contraction Square: 27.5 - 48 mm -
To complement the new pin jaws, the mini spigot jaws have also been improved. These jaws perform many of the same tasks in expansion and the extra screw hole profiles and added teeth to the outside provide tremendous grip for when this area will not be visible in the finished work piece. This set has been given a 13 mm internal diameter, making it ideal for turning strong spigots on knobs and handles, again adding to their versatility. Expansion: 26 - 46 mm Contraction Spigot: 13 - 33 mm Contraction Square: 11 - 31 mm -
These jaws are fantastically effective for drilling pen blanks. They eliminate the need for a drill press and offer much more accurate results and the deep grip to all four sides ensures incredible holding power. Drilling on the lathe means the feed speed of the drill bit is under your complete control, meaning a superior finish can be achieved on a wide range of materials. These jaws are also useful for working on small finials and similar projects as in addition to their strong grip, the work piece is moved forward from the chuck, allowing greater access. Contraction Square: 10 - 26 mm Contraction Spigot: 11 - 20 mm Expansion: 35 - 64 mm -
Records' new pin jaws have been improved by squaring the external shoulder to allow workpieces to properly register against the back of the jaws. This is ideal for use in expansion, to grip tubes in work pieces such as pepper or salt grinders. We have also reduced the internal diameter to 9 mm, making it ideal for making finials or lace bobbins - Thereby increasing its versatility. This set is ideal for miniature turning and to grip workpieces internally without excessive damage or marking. Expansion: 28 - 45 mm Contraction Spigot: 9 - 28 mm Contraction Square: 7 - 27 mm -
Out of stock
These nylon jaws are designed specifically to be cut with standard turning tools. They can be easily shaped to create bespoke jaws to fulfil exacting requirements and offer excellent grip without marking the work piece. Diameter: 118 - 140 mm Depth: 26 mm -
Out of stock
Record have increased the capacity of their larger remounting jaws, whilst ensuring they can still clear the bed of lathes with the popular 12” swing capacity and are capable of holding 275 mm (10 3/4”) diameter bowls in contraction mode. Remounting jaws are incredibly popular due to their flexibility. They work in both contraction and expansion modes and can be fitted behind other jaw sets to create bespoke set-ups to make turning more efficient. The soft stoppers are designed to hold without causing damage, making them ideal for remounting finished or partly finished objects for further work. -
Remounting jaws are incredibly popular due to their flexibility. They work in both contraction and expansion modes and can be fitted behind other jaw sets to create bespoke setups to make turning more efficient. The soft stoppers are designed to hold without causing damage, making them ideal for remounting finished or partly finished objects for further work. Expansion: 95 - 215 mm Contraction Spigot: 59 - 170 mm Contraction Square: 53 - 154 mm -
Record SC4 Professional Geared Scroll Chuck Package with no insert is perfect for the demanding woodturner, being capable of holding large work pieces yet possessing the precision and compactness to handle more delicate work. This model features an enclosed back with full indexing plate and has pinions driven by a long ball ended hex key to make access easy, even when large work pieces are mounted. This chuck is an insert model which means it is easily future proofed against upgrades and can be used on multiple lathes, even if they have different spindle threads (additional optional inserts required).Supplied complete with the deep wood screw, 50 mm standard jaws, 2” faceplate this package offers professional performance at an exceptionally affordable price.Please order SC4 chuck insert to suit your lathe -
Specially designed to provide a strong contracting grip to unsupported spigot turning applications, e.g. vases and goblets. It can handle spigots from 30mm (13/36inch) to 50mm (2inch). Also features expanding grip mode.
-
Record SC3 Chuck Package is lighter and more compact than the SC4, making it ideal for use on any lathe, particularly small to medium sized machines and is still compatible with the full jaw range. The compact design reduces load on the lathe spindles and bearings and gives good access to smaller work pieces. The large jaw slides offer unrivalled strength and holding power that cannot be found in other chucks of this size.Supplied complete with the deep wood screw, 50 mm standard jaws and 2” faceplate this package offers unrivalled value. -
Chuck Insert to fit the Record Power SC1 Mini Chuck and SC4 Professional Geared Scroll Chuck only.
