-
3" arbors 75mm x 6mm spindle pad with 20mm foam -
These extended jaws act like a pin chuck, expanding into a pre-bored hole. A useful technique for free form edge bowls as you don't have to bore an exact size as with other pin jaws. The longer jaws allow for a very powerful spigot grip for smaller work. Also features a small dovetail. Expansion 26 - 46mm Contraction square: 28 - 7mm Contraction spigot 31 - 10mm
-
Specially designed to provide a strong contracting grip to unsupported spigot turning applications, e.g. vases and goblets. It can handle spigots from 30mm (13/36inch) to 50mm (2inch). Also features expanding grip mode.
-
metal hands plus matching brass second hand
-
Sale!
The best looking single stage dust collector to hit the market in years. Sleek design and power to match. No more fumbling with a steel band to mount your lower bag, the bflux comes with a patented Snap-Band that makes changing the bag a breeze. Unlike most 1HP units the bflux feels solid & has a low dB rating. The horizontal dust chute provides optimum airflow & can swivel 180 degree to make the 4 inch outlet face downwards. -
Sale!
Briwax Original is formulated with fast drying, stronger solvents which speed up drying, and also increase the cleaning ability of the wax slightly. This means that it will renovate older dirtier furniture and leave you with the deep grain enriching Briwax shine. Unsealed wooden surfaces should be smooth, dry and clean. Apply Briwax using a lint free cloth or 0000 Steel Wool, thoroughly working the wax into the grain. Once dry, buff to desired finish with a clean soft cloth.
-
Lubricating Wax is specially formulated to lubricate and clean interior tools and machinery to increase their efficiency and keep working parts moving freely. Silicone-free, it is suitable for use on saw blades, cutter blades, machine tables, lathes and planers to increase longevity, and help to reduce rust and corrosion on all bare metal surfaces . Its special properties will also assist in the quick cleaning and easy removal of glue from veneer presses and G-clamps, as well as help to reduce resin build-up from softwood. -
Used for diluting French polish, Light Fast and Earth Stains, or cleaning surfaces and tools.
-
Removal of Plastic Coating from brushes, rollers and application equipment. Also used to thin Plastic Coating when necessary if it is to be sprayed. Also used to thin the product when an opened grained oil type finish is required. -
Shellac Sealers are used in the French polishing trade either; as a quick drying finish to seal timber after staining; or as a basecoat for subsequent coats of French Polish. -
24K Jonah Clip
-
This Bolt Action pen will be hard for anyone to put down. Every detail, from the bolt action mechanism to the precision engineered components, was carefully designed to ensure uniqueness and reliability. The realistic bolt-action handle smoothly advances and retracts to securely lock the refill in place. Includes a bolt action rifle clip and a replica 30 caliber cartridge and rose gold bullet tip for added authenticity. Assembley instructions included. (Assembled pen for illustration only.)
-
7mm Stylus twist pen with broad band centre ring, gold clip.
-
Bushes suitable for Flat top Fountain pen & Flat top rollerball (pack of 4).
-
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 8.5mm, 9.5mm & 10mm pens. -
Adjustable shaft allows the user to turn either one or two pen parts at a time, Supplied with shaft and spacers for 7mm pen kits plus cones to, accepts larger pen kits. Supplied with lock-nut kit for larger blanks.
-
Sale!
The BBS1 is a hugely versatile machine, particularly useful for tight curves as well as more sweeping contours, this bobbin sander allows beautiful, crisp results to be achieved with ease. The machine comes with two bobbins and corresponding table inserts and a range of additional sizes are also available. The BBS1 allows a wide array of shaping tasks to be accomplished with ease, from intricate craft projects to larger work on cabinets, chairs and much more. In addition, the powerful and quiet 1/2 hp induction motor ensures larger timbers can be handled effectively and easily. The finely ground cast iron surface also helps easy movement of the timber whilst providing extremely solid support. The build quality, features and versatility of this machine makes it an essential tool in almost any workshop. -
The Splay tool can be used as a skew chisel, a box scraper, a shear scraper and also for detail work on spindles.
-
Designed for deep hollow forms these tools have a polished H.S.S. adjustable top section which gives complete control on the depth of a cut.
-
These unique tools developed by the well respected North American woodturner, Dave Hout, are used for making finished cuts when producing bowls. The cut is shear and leaves the end grain smooth. With practice, sanding can be all but eliminated. The two tool set consists of one tool with a deeper flute to be used on bowls up to 5" -6" in diameter. The shallower tool is for use on bowls 6" and larger in diameter. -
Specially developed to allow the blade to move more easily along the tool rest than normal rectangular shaped chisels. -
These are detailing tools used on between-centre work, where the grain is running parallel to the bed bars.They are used to create coves, beads and other profiles on goblets, vases and egg cups. -
An appropriate and imaginative choice of wood can really bring your work to life, and the more you understand about the raw material, the closer you can come to realizing your vision. This book describes 42 of the world’s most important woods for turning. It has been written specifically for woodturners by expert turner Mark Baker, and goes into great detail with regard to physical characteristics, working qualities and availability. Colour photographs throughout illustrate different varieties of grain and figure, and there are attractive examples of finished work to provide you with inspiration. More than 100 other woods are considered more briefly. This revised edition of Wood for Woodturners is fully updated with new images and resources. There is also valuable advice on buying and seasoning timber, sustainability and a handy guide to wood terminology. -
Ready, Set, Turn! Weekend Woodturning Projects: 25 Simple Projects for the Home is the best way to start your woodturning and woodworking pursuit. This book will build your woodturning skills and your confidence. Ideal for beginner and intermediate turners. This book presents clear, step-by-step instructions accompanied by over 600 photographs and finely detailed drawings (with dimensions for further guidance) —here's all the hands-on knowledge you'll need to start your woodworking projects. Features that all weekend woodturning warriors will love:- Helpful sections on safety
- How to season wood
- Tool and material lists for each project
- Special sidebars describing the types of wood used
- Spindle roughing gouge
- Spindle gouge
- Parting tool
- Bowl gouge
- Skew chisel
- Scrapers
- Plus carving tools and a boring tool
- Rolling pin
- Candlestick
- Beaded bowl
- Salt and pepper mills
- Christmas ornaments, and many more!
-
This practical new guide to pen and pencil turning, featuring 15 step-by-step projects. Pens from fine and rare timbers to acrylics and polymer clays, the possibilities are endless. Perfect for beginners to the lathe as well as more advanced turners, all the basic techniques and information needed for getting started are covered. From blank preparation to turning, sanding, polishing and assembling, everything is explained clearly and in jargon-free terms. -
Two of the countrys leading woodturners, Nick Agar and David Springett, have collaborated to produce this new and exciting book. Together, they have developed a novel approach to woodturning using thin, narrow planks of wood (usually of little use to woodturners) to produce hollow, twisted vessels. This turning method is described in detail and there are 14 designs, each accompanied by fully illustrated step-by-step instructions plus an inspirational gallery. -
Out of stock
The BS300E is a great all rounder perfectly specified for the medium sized workshop where a range of duties will be required.Featuring a solid fence, vital for accurate ripping, which has a heavy extrusion mounted on a cast iron base and fixed to a solid steel bar for maximum rigidity and support. This is based on an industrial Startrite design and much more solid than other fences at this level. The machine also features a solid double trunnion fence mount to provide rigid table support and one-handed table tilt on a smooth rack and pinion. Adding to the structural integrity of the BS300E are the cast iron bandwheels which are fitted with precision ground rubber tyres to provide a flywheel effect for smooth cutting. A solid blade tension indicator is fitted to the rear of the machine to allow for easy setup. The BS300E is also supplied with a basic wheel kit as standard.
