-
3" arbors 75mm x 6mm spindle pad with 20mm foam -
These extended jaws act like a pin chuck, expanding into a pre-bored hole. A useful technique for free form edge bowls as you don't have to bore an exact size as with other pin jaws. The longer jaws allow for a very powerful spigot grip for smaller work. Also features a small dovetail. Expansion 26 - 46mm Contraction square: 28 - 7mm Contraction spigot 31 - 10mm
-
Specially designed to provide a strong contracting grip to unsupported spigot turning applications, e.g. vases and goblets. It can handle spigots from 30mm (13/36inch) to 50mm (2inch). Also features expanding grip mode.
-
metal hands plus matching brass second hand
-
To connect 2.5" diameter ducting together. -
The best looking single stage dust collector to hit the market in years. Sleek design and power to match. No more fumbling with a steel band to mount your lower bag, the bflux comes with a patented Snap-Band that makes changing the bag a breeze. Unlike most 1HP units the bflux feels solid & has a low dB rating. The horizontal dust chute provides optimum airflow & can swivel 180 degree to make the 4 inch outlet face downwards. -
Briwax Original is formulated with fast drying, stronger solvents which speed up drying, and also increase the cleaning ability of the wax slightly. This means that it will renovate older dirtier furniture and leave you with the deep grain enriching Briwax shine. Unsealed wooden surfaces should be smooth, dry and clean. Apply Briwax using a lint free cloth or 0000 Steel Wool, thoroughly working the wax into the grain. Once dry, buff to desired finish with a clean soft cloth.
-
Chestnut Drill Polishing Brush has natural bristles that might seem a little harsh for polishing waxes but in fact are ideal for the task. Chestnut Drill Polishing Brush, which fits any electric drill or can also be used with the Buffing Wheel System, will give a higher gloss and more resilient finish to any waxed piece. In use, the bristles splay out in a mushroom shape, making this brush ideal for polishing spindles and cylinders. It can be used on flat surfaces but is prone to leave rings so the drum brush or dome brush are recommended for this application. The stock of the brush is about 10cm and the bristles are 4cm long. If the bristles of the brush become clogged with wax simply wash it in warm soapy water and allow to dry before use. -
Liberon Easy French Polish is as shellac and resin-blended polish ideal for use on furniture, carved woodwork and artefacts in rare or exotic woods. Suitable for use on small surfaces measuring 1m2 or less, it will beautifully enhance the wood’s natural finish, and produces great results quickly. Available in clear for a natural effect, it is ideal for beginners to furniture restoration. -
Lubricating Wax is specially formulated to lubricate and clean interior tools and machinery to increase their efficiency and keep working parts moving freely. Silicone-free, it is suitable for use on saw blades, cutter blades, machine tables, lathes and planers to increase longevity, and help to reduce rust and corrosion on all bare metal surfaces . Its special properties will also assist in the quick cleaning and easy removal of glue from veneer presses and G-clamps, as well as help to reduce resin build-up from softwood. -
The white pigment in Liming Wax is Titanium Dioxide (TiO2) which gives it a brilliant white finish which will perfectly highlight open grain. Use Liming Wax on any open grained timber for a dramatic and striking effect which can be emphasised by using a stain or Ebonising Lacquer first. For an even better result use the Liming Brush first to open up the grain, allowing more Liming Wax to enter; spread the Liming Wax over the whole surface and then wipe off after a few minutes. The Liming Wax will stay in the open grain and the effect will be instantly visible. Whilst Liming Wax is a wax (obviously!), the wax is mainly a carrier for the white pigment. Therefore an overcoat of some kind is needed. WoodWax 22, Microcrystalline Wax, Finishing Oil or Hard Wax Oil are ideal for this and will lock the wax in place whilst keeping it clean and bright. -
Used for diluting French polish, Light Fast and Earth Stains, or cleaning surfaces and tools.
-
Boiled linseed oil is used for finishing most bare timber and suitable for replacing the natural sheen that wood can lose after long periods drying in the sun. Boiled linseed oil contains special additives which speed the drying process. Will also waterproof ground sheets and tarpaulins. -
Removal of Plastic Coating from brushes, rollers and application equipment. Also used to thin Plastic Coating when necessary if it is to be sprayed. Also used to thin the product when an opened grained oil type finish is required. -
Shellac Sealers are used in the French polishing trade either; as a quick drying finish to seal timber after staining; or as a basecoat for subsequent coats of French Polish. -
Out of stock
Maple pen box with rosewood ends, in white carton for protection.
-
24K Jonah Clip
-
Out of stock
NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit -
Out of stock
NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit
-
This Bolt Action pen will be hard for anyone to put down. Every detail, from the bolt action mechanism to the precision engineered components, was carefully designed to ensure uniqueness and reliability. The realistic bolt-action handle smoothly advances and retracts to securely lock the refill in place. Includes a bolt action rifle clip and a replica 30 caliber cartridge and rose gold bullet tip for added authenticity. Assembley instructions included. (Assembled pen for illustration only.)
-
7mm Stylus twist pen with broad band centre ring, gold clip.
-
Bushes suitable for Flat top twist pen (pack of 4).
-
Bushes suitable for Flat top Fountain pen & Flat top rollerball (pack of 4).
-
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 8.5mm, 9.5mm & 10mm pens. -
Out of stock
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 7mm, 8.5mm, 9.5mm & 10mm pens.
-
Self-centring design. Unique support and threaded rod design for accurate drilling. Holds and centres pen blanks up to 1-1/2 inch square. Quick and easy set up. -
Adjustable shaft allows the user to turn either one or two pen parts at a time, Supplied with shaft and spacers for 7mm pen kits plus cones to, accepts larger pen kits. Supplied with lock-nut kit for larger blanks.
-
Self-feed mechanism, ensures a clean, even, bright flame in the centre of the chimney.
-
This heavy duty belt and disc sander has plenty of power to handle demanding sanding whilst also being capable of fine and delicate work. The solid cast iron table provides ample support and the 1 hp motor provides plenty of power to avoid stalling under pressure. Shown with optional leg stand. -
The BBS1 is a hugely versatile machine, particularly useful for tight curves as well as more sweeping contours, this bobbin sander allows beautiful, crisp results to be achieved with ease. The machine comes with two bobbins and corresponding table inserts and a range of additional sizes are also available. The BBS1 allows a wide array of shaping tasks to be accomplished with ease, from intricate craft projects to larger work on cabinets, chairs and much more. In addition, the powerful and quiet 1/2 hp induction motor ensures larger timbers can be handled effectively and easily. The finely ground cast iron surface also helps easy movement of the timber whilst providing extremely solid support. The build quality, features and versatility of this machine makes it an essential tool in almost any workshop. -
Crown Multi Tip Scraper offers a range of scraper shapes on one handle. Round, square and pear shaped cutters.
-
The Splay tool can be used as a skew chisel, a box scraper, a shear scraper and also for detail work on spindles.
-
Designed for deep hollow forms these tools have a polished H.S.S. adjustable top section which gives complete control on the depth of a cut.
-
The Hardwood Scraper is different in that it has a negative rake on the bevel. It is designed to reduce or eliminate tear-out of the fibres of wood leaving a highly polished surface on all types of wood. This feature is particularly highly sought after by those working in the typically hard woods like African Blackwood. Musical instrument makers find the Hardwood Scraper a particularly useful addition to their collection of lathe tools. It is equally effective on spindle and faceplate work. -
A special calliper (ref 973) which makes dimensioning threaded or push fitments that much easier. -
The handles are made of aluminium and alloy in combination to give the best of strength, balance and vibration dampening qualities. Each handle comes with a durable Softex grip for extra comfort. Additional knurling provides a further non-slip surface. Both handles will take turning chisels with a 5/8" diameter shaft. -
Multi Tip Hollowing Tool incl. 2 hollowing tips and a finishing scraper. Designed specifically to fit the Sovereign System. The RS200KT multi-tip hollowing tool is one of Robert Sorby’s most versatile tools. Its massive half round shank and interchangeable tips make it capable of multiple applications. A Robert Sorby legend, this tool is a must-have for every turner’s collection. -
Midi Multi Tip Hollowing Tool incl. 2 hollowing tips and a finishing scraper. Designed specifically to fit the Sovereign System. Its small scale makes it ideal for smaller hollow forms.
-
- ½" Flat surface allows for aggressive hollowing
-
- Swivel clamp allows under cutting
-
- One curved tip (RS111C) for flowing shapes
-
- A second pointed tip (RS112C) for square shapes
-
- Teardrop scraper cutter acts as a round, half round and square scraper all in one
- Full instructions included
-
-
Sovereign Collet - pilot bored -
Sovereign Threaded Coupler, this handy accessory allows the turner to easily customise handle length. Use to join handles together. -
unhandled turning gouge to fit the Sovereign System. -
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system. Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way they work. Designed to quickly and easily complete many popular projects, the TurnMaster has been a huge success with both novices and experienced turners. Its unprecedented collection of parts and cutters making it the most versatile and value added single tool concept on the market today. Designed specifically to fit the Sovereign System. -
Crown 1" x 3/8" Heavy Duty Scrapers help to keep vibration to a minimum. -
These unique tools developed by the well respected North American woodturner, Dave Hout, are used for making finished cuts when producing bowls. The cut is shear and leaves the end grain smooth. With practice, sanding can be all but eliminated. The two tool set consists of one tool with a deeper flute to be used on bowls up to 5" -6" in diameter. The shallower tool is for use on bowls 6" and larger in diameter. -
Crown's H.S.S. Shallow flute 'Detail' Gouges are ideal for cutting coves and beads. The shallow flute permits a smoother cut and gives less vibrations due to more metal being under the flute. -
Specially developed to allow the blade to move more easily along the tool rest than normal rectangular shaped chisels. -
These are detailing tools used on between-centre work, where the grain is running parallel to the bed bars.They are used to create coves, beads and other profiles on goblets, vases and egg cups. -
Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The ⅛" – 3mm tool reduces the amount of waste, vital if using an expensive wood. It also makes for a fine detailing tool, e.g. beads and fillets. -
An appropriate and imaginative choice of wood can really bring your work to life, and the more you understand about the raw material, the closer you can come to realizing your vision. This book describes 42 of the world’s most important woods for turning. It has been written specifically for woodturners by expert turner Mark Baker, and goes into great detail with regard to physical characteristics, working qualities and availability. Colour photographs throughout illustrate different varieties of grain and figure, and there are attractive examples of finished work to provide you with inspiration. More than 100 other woods are considered more briefly. This revised edition of Wood for Woodturners is fully updated with new images and resources. There is also valuable advice on buying and seasoning timber, sustainability and a handy guide to wood terminology. -
Ready, Set, Turn! Weekend Woodturning Projects: 25 Simple Projects for the Home is the best way to start your woodturning and woodworking pursuit. This book will build your woodturning skills and your confidence. Ideal for beginner and intermediate turners. This book presents clear, step-by-step instructions accompanied by over 600 photographs and finely detailed drawings (with dimensions for further guidance) —here's all the hands-on knowledge you'll need to start your woodworking projects. Features that all weekend woodturning warriors will love:- Helpful sections on safety
- How to season wood
- Tool and material lists for each project
- Special sidebars describing the types of wood used
- Spindle roughing gouge
- Spindle gouge
- Parting tool
- Bowl gouge
- Skew chisel
- Scrapers
- Plus carving tools and a boring tool
- Rolling pin
- Candlestick
- Beaded bowl
- Salt and pepper mills
- Christmas ornaments, and many more!
-
This practical new guide to pen and pencil turning, featuring 15 step-by-step projects. Pens from fine and rare timbers to acrylics and polymer clays, the possibilities are endless. Perfect for beginners to the lathe as well as more advanced turners, all the basic techniques and information needed for getting started are covered. From blank preparation to turning, sanding, polishing and assembling, everything is explained clearly and in jargon-free terms. -
Spheres within spheres, stars within cubes, delicate lattices with no apparent means of support—woodturners over the centuries have developed a whole range of extraordinary structures which seem at first sight to be quite impossible. In fact, all of these things can be made by anyone with basic woodturning skills, an ordinary lathe and simple hand tools—and this book shows you how.- A best-seller when first published in 1993, the book has been thoroughly revised for this new edition.
- Stunning new 3-D illustrations show cutaway views of the work in progress, making the instructions even easier to follow than before.
- A variety of projects in addition to an introductory chapter outlining the required equipment, advice on selecting wood, as well as workshop safety.
-
Two of the countrys leading woodturners, Nick Agar and David Springett, have collaborated to produce this new and exciting book. Together, they have developed a novel approach to woodturning using thin, narrow planks of wood (usually of little use to woodturners) to produce hollow, twisted vessels. This turning method is described in detail and there are 14 designs, each accompanied by fully illustrated step-by-step instructions plus an inspirational gallery. -
This book will guide you through the various health and safety issues, the tools and equipment needed to get the best out of your woodturning, mastering the basic techniques and how to add decorative features. Nick Arnull illustrates how to use highly original decorative methods and artistic skills to complete the finished projects. Each project includes easy-to-follow instructions and detailed photography to inspire you to take what you have learnt and apply these skills to your own work. -
Derek Hayes investigates the process and practice of design in woodturning. While aiming to instill confidence in appreciating, criticising and selecting sources of inspiration, He looks closely at design elements, sketching, proportion, pattern, open forms, enclosed forms, the foot, the rim, using wood, decoration and colour; with instructive diagrams and photographs that will guide the reader to a better understanding of design. -
The worlds pre-eminent woodturning teacher provides everything you need to know to turn bowls. Richard Raffan draws upon his 30 plus years of experience to lead you through the key elements -- from planning to completion. With the help of detailed text and step-by-step photos, Raffan covers wood and tool selection, design advice, surface embellishment and finishing techniques. For the more experienced turners, there are chapters on advanced techniques, decoration, and form and balance. You'll also find extensive appendices, troubleshooting charts and advice on selling bowls. Perhaps best of all, Raffans contagious respect for the craft comes through on each page, and it will stir you to do your best work. Turning Bowls gives you:- thorough coverage of tools, wood selection and design
- advice on how to avoid and solve common turning problems
- information that ranges from the basic to the advanced
- expert-level instruction in an easy-to-understand format
-
30 Projects are rated in order of difficulty, from beginner, through to intermediate and advanced, the latter not solely based on the skills of the turner, but also on access to the materials or machinery required for the project. Not everyone has access to particular machinery, tools or skills, but a basic level of turning is assumed, together with the availability of a chuck with compression jaws. -
The BS300E is a great all rounder perfectly specified for the medium sized workshop where a range of duties will be required.Featuring a solid fence, vital for accurate ripping, which has a heavy extrusion mounted on a cast iron base and fixed to a solid steel bar for maximum rigidity and support. This is based on an industrial Startrite design and much more solid than other fences at this level. The machine also features a solid double trunnion fence mount to provide rigid table support and one-handed table tilt on a smooth rack and pinion. Adding to the structural integrity of the BS300E are the cast iron bandwheels which are fitted with precision ground rubber tyres to provide a flywheel effect for smooth cutting. A solid blade tension indicator is fitted to the rear of the machine to allow for easy setup. The BS300E is also supplied with a basic wheel kit as standard. -
An ideal workhorse for the busy workshop where power and generous capacity are required but budget and space do not allow a bigger machine. This features an open legstand, often requested by our users as it provides greater stability and can be used with an optional pedal style wheelkit. A basic wheelkit is provided as standard. The bandwheels are cast iron and dynamically balanced with precision ground, crowned rubber tyres usually only found on much more expensive industrial machines – the flywheel effect of the cast iron wheels improves cutting performance and speeds. Our tables are some of the largest in their category and a one piece cast double trunnion has been designed to provide even greater support and rigidity. The rip fence is the strongest and most industrial in its category with a chromed fence and the mount machined from a single piece of cast iron. The extrusion itself is a heavy section to provide rigidity and accuracy. -
Out of stock
Aids in removing cured superglues from skin and work surfaces. Debonding agent for all super glues. Always test first. 1-oz bottle. -
Eye protection to EN166, 167, 168. (Medium protection against high speed particles) -
Outside caliper with fine adjustment for measuring spindle diameters when turning between centres.
-
Divider with fine adjustment for measuring between two points, scribing circles prior to turning, marking along a spindle etc. -
Inside caliper with fine adjustment suitable for measuring internal dimensions, eg turned boxes. -
The Robert Sorby ProEdge takes all the guesswork and effort out of sharpening all your woodworking, woodturning tools. The ProEdge has an abrasive belt which is a quick and efficient method of putting a keen edge on each and every tool. The cool running belt avoids any overheating. The ProEdge comes complete with aluminium oxide and zirconium belts. The ProEdge requires no complex assembly - it can be plugged in and used straight from the box.
-
The ProEdge Deluxe system includes a skew jig, a standard gouge jig, a fingernail profiler and three different belts in addition to the basic system. -
Out of stock
Featuring a spiral twist, these plain end HSS blades can cut in any direction without the need to turn the workpiece. This is particularly useful for projects that are too big for the throat depth of the scroll saw. They also allow for pieces to be cut with the bevel running in the same direction all round. 0.8 mm wide, 0.34 mm thick, 40 TPI. -
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 20 TPI. -
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 15 TPI.
-
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 10 TPI
-
The width of these pin end blades makes them ideal for straighter and more arduous cuts, such as deep hard woods. The tooth pattern makes them ideal for faster cutting as they provide better chip clearance than standard tooth patterns. 3 mm wide, 0.5 mm thick, 9 TPI. -
The width of these pin end blades makes them ideal for straighter and more arduous cuts, such as deep hard woods. The tooth pattern makes them ideal for faster cutting as they provide better chip clearance than standard tooth patterns. 2 mm wide, 0.25 mm thick, 18.5 TPI.
-
Out of stock
The standard gouge jig allows easy sharpening of all standard ground woodturning gouges. -
The cutter holder is a great and inexpensive sharpening accessory. Being double ended it allows the turner to hold comfortably almost every Robert Sorby tool tip without the fear of catching fingers on a sharpening belt or grinding wheel.
-
The honing wheel arbor mounts the Honing Wheel to the ProEdge sharpening system. -
The abrasive honing wheel that can be shaped to allow honing of gouge flutes, especially useful for the woodcarver. -
Applied to a buffing mop the honing paste creates a highly polished finish on any steel. -
Out of stock
The pigtail mandrel is used to mount the Buffing Mop to the ProEdge sharpening system. -
Out of stock
The buffing mop gives that extra fine edge. -
A wet stone sharpening system with a range of jigs and accessories and is also an extremely useful tool for general household tasks, such as the sharpening of knives, gardening tools and many other items. Included in this package is the WG250/K Diamond Trueing Tool, an essential accessory to ensure the outer diameter remains concentric and the sharpening surface perfectly flat. For more details and to see a video click on more info button. -
The new DML320 lathe offers fantastic value for money, being compact and powerful yet with very generous capacities for a medium sized lathe, giving woodturners the chance to own a high quality variable speed machine at an unbeatable price. The solid cast iron bed, tailstock and headstock offer superb stability, even when turning items at the limits of the lathe’s considerable capacities. At the heart of this machine is the high quality electronic variable speed function, giving smooth and responsive speed change at the turn of a dial, with a highly accurate digital speed readout. The 3 pulley system ensures excellent torque across the full range of speeds and is powered by a high quality and vibration-free motor. The DML320 is also capable of reverse turning, ideal for achieving a perfect finish when sanding.
-
The DML305 cast iron lathe represents a new benchmark in high quality midi lathes and is perfect for the user with minimal space or as a second lathe for demonstrations and shows. The bed is made from finely ground cast iron for weight and rigidity and fitted with cam locking tool rests that clamp easily and solidly to the bed with one handed operation. The machine has 393 mm between centres as standard and an optional bed extension can be added to increase this capacity.
The swing over the bed is 305 mm and the motor is 1/2 hp, providing plenty of power for the capacities of these machines. The spindle has an M33 thread to ensure a wide range of Record Power accessories can be fitted.
This lathe is extremely well finished with polished metal handles, spindle locks with indexing and graduated markings on the tailstock barrels. Many of these features are normally only found on expensive professional lathes.
-
The DML250 is a compact and extremely well built machine that offers excellent performance and exceptional value for money. The finely ground cast iron bed, along with the cast iron headstock, tailstock and tool rest, greatly reduce vibration and provide ample strength for the lathe to cope with heavy duty work. The capacities of this machine and its overall size make it a perfect choice for the smaller workshop. It is also ideal as a second lathe for regular use on small work and its portability means it can be used at demonstrations and shows. -
This brand new lathe from Record Power represents the culmination of many decades of expertise in the manufacture and supply of superior woodturning lathes. Developed with the help of professional woodturners and keen hobbyists, Record believe they have produced a world-class machine for woodturners of all levels. Thanks to a number of innovative design solutions the capabilities, features and performance of the Herald far exceed anything a machine of this size has been capable of before - It brings top-end professional performance at a fraction of the size and cost of comparable heavy-duty machines.To reflect the Record Power heritage in a modern context, the look of the lathe incorporates the elegant and balanced curves of the earlier Coronet series in a more streamlined and efficient form. As well as looking great, the Herald feels great - the excellence of engineering, ergonomics and quality manufacturing can be felt throughout, making the lathe a pleasure to use whilst delivering rock solid performance. -
Out of stock
The midi sized lathe continues to be Charnwoods' best seller. It is a size which can accomplish most of the projects turners are likely to try and is the largest lathe which can comfortably be moved off the bench when not in use. We have developed ours further this year to now include an indexing system on the headstock spindle as well as more robust electronics, specifically designed for UK voltage. The bed of the lathe is one-piece precision ground cast iron giving 14" between centres when working with our new heavy duty centres, which are supplied as standard. The bowl turning capacity of 12" diameter over the bed, requires a very low speed which is achieved using a converter and a DC motor. A clear LCD display shows the current RPM. The tool rest banjo is a cam-lock design for rapid adjustments with all metal components. The tool rest itself is our ever popular round bar made from hardened steel The headstock is hollow centred to allow for easy tool removal, the tailstock is also hollow and has automatic centre removal. Supplied with drive and tail centres 2MT, knockout bar, 6" toolrest with 5/8" shank, 3" diameter faceplate, tool holder, carrying handles and cable tidy. N.B. The distance between centres will vary and be dependent on the type of centres or accessories used. Maximum distance is 450mm (18"). -
Bocote (Mexican Rosewood) is dark green brown timber with a white sapwood. Easily turned to a very fine finish. -
Pink ivory wood dries slowly and doesn't split easily due to its high oil content. Its attractive colouring makes it ideal for carving, turning, inlay work and even musical instruments. -
The Buffing Tree comprises of three 6 inch wheels, in the A, B and C cloth grades, firmly held on a central spindle. It’s ideal for buffing small items and, after loading the wheels with the compounds and wax, allows you to move from one wheel to the next in quick succession, dramatically reducing the time otherwise taken up by changing wheels. Ideal for polishing small items such as fruit, pens, boxes etc in batches. Requires one of our mandrels to fix to the chuck and a live centre for support at the tailstock. PLEASE NOTE: The Buffing Tree does not come as kit containing the mandrels and compounds etc; this is deliberate as if you already use the Buffing System you will have these and won’t want to buy them again. If you do not have these items they are available to purchase separately or as a pack in the Buffing Accessory Pack. -
All the items you need to use our Buffing System except the wheels – the perfect add-on when buying the Buffing Tree, the 8 inch wheels or the 4 inch wheels or the Dome Buffs The kit comprises of the Large Mandrel, the Small Mandrel, Compound 1, Compound 2, Carnauba Wax Stick. ALL OF THESE ITEMS ARE INCLUDED IN THE BUFFING WHEEL KIT.
