-
820h Round nose scraper 1/2inch ; 830h Parting tool 1/8 inch ; 840h Spindle gouge 3/8 inch ; 842h Bowl gouge 3/8 inch ; 843h Roughing gouge 3/4 inch ; 810h Standard Skew Chisel 3/4 inch -
Out of stock
For anyone turning salt and pepper mills using a CrushGrind mechanism, this is an essential tool in obtaining the correct depth and size of recesses needed to enable the mechanism to work correctly. The step or shoulder of the tool gives an accurate position of the recess required for the base section of the mill. The small V notch on the right hand side allows the other groove to be produced in the top section when it is lined up with the outer face. The CrushGrind tool will give accurate and effortless results time and again. -
Its small scale makes it ideal for smaller hollow forms.-
- ½" Flat surface allows for aggressive hollowing
-
- Swivel clamp allows under cutting
-
- One curved tip (RS111C) for flowing shapes
-
- A second pointed tip (RS112C) for square shapes
-
- Teardrop scraper cutter acts as a round, half round and square scraper all in one
- Full instructions included
-
-
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Perfect for the smaller piece. Related Products: This cutter is designed for use with the following tools:-
- Midi Multi-tip Hollowing Tool (RS100KT and RS100)
-
-
The Multi Tip Hollowing Tool (RS200KT) is our recommendation for those who wish to take their first steps in hollowing and those working on projects of 6 inch and under. It is one of the most versatile tools around. -
Delicately balanced tools that are the planes of the spindle turners tool kit. Originally designed at Robert Sorby, the profile allows the tool to glide effortlessly along the tool rest without fear of the edges dragging on the rest. They will smooth cylinders, clean the end grain of spindles, cut shallow curves, beads, pummels and v-cuts, e.g. stair balustrading and chair legs. These tools are indispensable if a fine finish is required from the tool. -
The Sandmaster is an essential part of every turner's tool kit. It comes with 5 different grits of abrasive to take even the roughest projects to a glass-like finish every time. It avoids an uneven finish often associated with hand sanding and there is no danger of catching hands on the revolving project. There is little or no surface damage/head build-up, as there is with power sanding and there is no cable to trip over. Head articulates to access even the most difficult areas. Sponge head is ideal for working in tight spaces. Sandmaster creates a fraction of the dust generated by power sanding. It can be adapted to take a polishing mop. -
Related Products: This cutter is designed for use with the following tools: Midi Multi-tip Hollowing System (RS100KT, RS100) RS2000 Deep Hollowing System The Robert Sorby small tear drop cutter provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of small bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports traditional scraping and shear scraping techniques. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. -
Sovereign Collet - pilot bored -
The Sovereign Extension is a useful addition to the range of accessories. Custom-made during the development of the new Sovereign sets. This 4" extension adds length to any Sovereign handle. NOTE: a threaded coupler is required. -
Sovereign Threaded Coupler, this handy accessory allows the turner to easily customise handle length. Use to join handles together. -
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system. Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way they work. Designed to quickly and easily complete many popular projects, the TurnMaster has been a huge success with both novices and experienced turners. Its unprecedented collection of parts and cutters making it the most versatile and value added single tool concept on the market today. Designed specifically to fit the Sovereign System. -
Out of stock
This 18" tool can produce either massive profiling cuts or delicate finishing cuts as necessary, -
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed. Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle sticks and other spindle projects. -
A must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary. -
Midi Multi Tip Hollowing Tool incl. 2 hollowing tips and a finishing scraper. Designed specifically to fit the Sovereign System. Its small scale makes it ideal for smaller hollow forms.
-
- ½" Flat surface allows for aggressive hollowing
-
- Swivel clamp allows under cutting
-
- One curved tip (RS111C) for flowing shapes
-
- A second pointed tip (RS112C) for square shapes
-
- Teardrop scraper cutter acts as a round, half round and square scraper all in one
- Full instructions included
-
-
Multi Tip Hollowing Tool incl. 2 hollowing tips and a finishing scraper. Designed specifically to fit the Sovereign System. The RS200KT multi-tip hollowing tool is one of Robert Sorby’s most versatile tools. Its massive half round shank and interchangeable tips make it capable of multiple applications. A Robert Sorby legend, this tool is a must-have for every turner’s collection. -
Used on bowls and platters to create smooth flowing curves.
-
A must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary. -
Used to part the finished project off from the waste material, the parallel sides make for a rigid tool that handles well. The ⅛" – 3mm tool reduces the amount of waste, vital if using an expensive wood. It also makes for a fine detailing tool, e.g. beads and fillets. -
These are detailing tools used on between-centre work, where the grain is running parallel to the bed bars.They are used to create coves, beads and other profiles on goblets, vases and egg cups. -
Related Products: These cutters are designed for use with the following tools: Medium tear-drop scraper (RS200C) to suit Multi-tip Hollowing System (RS200KT, RS200) Large tear-drop scraper(RS213C) to suit RS2000 Deep Hollowing System The Robert Sorby medium tear drop cutter, like its big brother (Large Teardrop RS213C) provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports traditional scraping and shear scraping techniques. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the 472 cutter holder to reshape the profile on the Robert Sorby ProEdge or on a grinding wheel. -
A special calliper (ref 973) which makes dimensioning threaded or push fitments that much easier. -
Holds tips and cutters securely allowing easy sharpening of small and difficult to grasp attachments. -
The round is a general purpose cutter for the rapid removal of material inside and outside bowls and hollow forms. It works equally efficiently on spindle work. The detail point offers an excellent choice for roughing down square stock to round and for creating fine detail, while the square is useful for generating square shoulders on tenons. It is also excellent for spindle work. Both the square and round cutters deliver an extremely fine finish that requires little or no sanding when the TurnMaster is switched to shear scraping mode. Manufactured with the highest quality micro grade tungsten carbide these cutters will provide incredible durability and endurance. Sharpening: Use a diamond file or diamond plate flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a diamond belt or on a grinding wheel using diamond or other high density abrasive material. Sharpens to: 0.7 microns Hardness: 90 RC Material: micro grade tungsten carbide Related Products: These cutters are designed specifically for the TurnMaster -
Providing choice and flexibility in one easy to handle tool. The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system. Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way they work. Designed to quickly and easily complete many popular projects, the TurnMaster has been a huge success with both novices and experienced turners. Its unprecedented collection of parts and cutters making it the most versatile and value added single tool concept on the market today. -
Providing choice and flexibility in one easy to handle tool. The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system. Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way they work. Designed to quickly and easily complete many popular projects, the TurnMaster has been a huge success with both novices and experienced turners. Its unprecedented collection of parts and cutters making it the most versatile and value added single tool concept on the market today. -
Sharpening: Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.2 -0.4 microns Hardness: 62 RC Material: M2 HSS Related Products: These cutters are designed specifically for the TurnMaster -
No more ground finger ends, just bolt on your turnmaster tips to aid with sharpening. -
Roman Plastic numerals in black . -
Roman Plastic numerals in gold.
