-
The outer chapter ring and decorative hands display the hours and minutes. Just above the figure six, a second dial ticks off the seconds. A quartz movement drives the exposed inner workings making a very attractive clock. The skeleton clock comes fully assembled and ready to mount in a frame or base of your making. -
Quartz Clock Movement, in 4 sizes, 11mm (short), 16mm (medium), 21mm (long) and 26mm (extra long) shaft length. The body of the clock is approx. 57mm square x approx. 18mm deep. -
Out of stock
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Good finishing requires a good foundation, and Cellulose Sanding Sealer is probably the best way of providing one. Compatible with everything in the Chestnut Products range that benefits from the use of a sanding sealer (which is pretty much everything apart from oil finishes!) it is superbly universal.
The purpose of a sanding sealer is manifold.
- It seals the open pores of the timber prior to the application of the next coat, meaning that more of it stays on the surface and less of the finish is needed. Not only does this make it economical, when finishing the thinner the applied coat the less likely it is to get damaged, so a sanding sealer will help the top coats be more resilient.
- Sanding Sealers also bind the loose fibres of the timber together giving a more solid foundation for the next coat, which helps make sure the final finish is able to adhere properly and thus be more durable.
- They also include a sanding agent which acts as a lubricant to make the sanding process easier – the sanding agent also stands slightly proud of the surface of the sealer and it is this that is denibbed – the sealer itself should still be intact after sanding.
-
Out of stock
Basswood is an ideal wood for woodcarvers and whittling. Its soft, fine, even texture makes it easy to work with, while its pale inconspicuous colour doesn't distract from the carved patterns of the finished product. It can take stain and polishes without difficulty. -
Super thin penetrating formula, bonds in 1 - 5 seconds. -
A simple kit comprising a brass tube with a decorative finial at one end and a means of attachment for hanging at the other. They are a great way of using up your offcuts to produce some unusual designs for seasonal tree decorations at Christmas. The brass tube fits on a7mm pen mandrel. -
150mm diameter tile. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Letter knives or paper knives make a useful desktop tool, simply add a wooden or an acrylic handle to make a useful gift. -
Mopane is a very heavy, dense timber. Dark red/brown in colour generally streaked with black. Narrow straw coloured sapwood. Turns well with care and polishes to a lustrous finish. -
African blackwood clarinet bell (reject). Dark purple-brown with black streaks, giving an almost black appearance. Generally straight grained with a fine even texture. Finishes exceptionally well. -
Gold or Chrome plated magnifying glass with glue on ferrule. 65mm diameter frame with 3 magnification. (inner dimensions of ferrule: 17mm x 20mm depth). -
A one-application woodturners friction polish that really does work and is ideal for use on smaller spindle work such as pens and similar objects up to around 10 cm (4") diameter. This exceptional polish is made using a specially formulated hard shellac as a base to give a harder, more durable finish, giving greater resistance to marks and blemishes from water, alcohol and heat. Normally applied directly onto bare timber (though it can be used over most oils too – but test on scrap first) this polish dries almost instantly yet goes on hardening for up to three weeks resulting in a truly durable finish which far exceeds others on the market today. Once fully cured the finish is food-safe and non-toxic. -
Wire type hose clamp for securing hose to machinery or fittings. For use with matching diameter hose. -
Sheffield stainless steel stamped butter knife blade, length 100mm, overall length 145mm including tang. Simply add a wooden handle. -
Wooden display case in maple for 7mm pen, in white carton for protection. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Long series sawtooth Forstner cutter Long series forstner bit (inch), sawtooth pattern, particularly suited for cutting down the grain. Long series - all sizes are a minimum of 150mm long, will produce over-lapping holes, resharpenable. -
Gold colour metal rim on plastic case with metal spring fittings. The case fits a hole 58mm - 62mm diameter x 18mm deep. Bezel diameter 65mm. -
1 metre 3 core gold flex (to order more than 1 metre change quantity column to metres required and press update basket)
-
Woodturners stick wax is a mixture of beeswax and carnauba wax it is slightly softer than the Carnauba Wax Stick and therefore slightly easier to apply and there are no concerns about it marking softer woods. Applied over a sanding sealer, simply hold the stick against the revolving work and allow the heat generated to melt the wax onto the wood. Buff up straight away using Safety Cloth, using the cloth to ensure an even coating. -
metal hands plus matching black second hand -
Shellawax cream is a woodturners friction and buffing polish. Sharing many of the characteristics of Shellawax liquid, Shellawax Cream is specially formulated for use on larger turned projects where it would normally be impossible to get a first class finish using a conventional friction polish and on stand-alone articles such as carvings. As with Shellawax, only one application is required to completely finish the work. Made using a specially formulated hard shellac as a base, this excellent product gives a hard, durable finish, with impressive resistance to marks and blemishes from water, alcohol and heat. The cream formulation retards the frictional drying characteristic of friction polishes, making it suitable for use on larger lathe-turned items such as bowls and platters. Being a cream, this product is easily controlled in application and is very economical in use. Shellawax Cream is non-toxic. -
Wood Bleacher is ideal for removing dark stains caused by rust, alcohol, damp, ink, ring marks and fruit. It can also be used to lighten naturally dark wood or natural wood which has darkened through alkali stripping, staining or weathering. It does not harm the wood. -
Wooden display box in maple for 7mm pens, in white carton for protection. -
Deep orange-brown timber with broad medullary rays creating a flame pattern on quarter cut faces or numerous spots on flat sawn surfaces. Hard and heavy with a slightly coarse texture. -
Plastic Bracket for Wall Mounting Hose. For use with 100mm diameter hose, or smaller, the wall hanging bracket will allow you to fix a hose line to the wall or ceiling. Comes complete with fixing screws and raw plugs. -
Pack of 10, cover to hide the screws holding the fixing plate to the wood. -
Gold colour box hinge with bow clasp suitable to make a lid for a cylindrical / round wooden box. Fits approximately 51mm spigot. -
Brass colour metal candle cups, fits a 23mm hole (approx.), with a 20 mm overall height, pack of 10.
