The Square Tip tool features a 15mm square cutting tip, each side having a very slight radius. It can remove quite a lot of material quickly. On the other hand it is more than capable of delicate refining cuts, flat or at a shear angle. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts.
Each tool comes with a hex key and spare machine screws.
-
Designed specifically with pen turners in mind. This finishing kit consists of nine different, colour coded, foam backed sanding pads measuring 10cm (4") x 8.5cm (3.1/4"). Includes the following grit sizes: 1500 - Rust 1800 - Green 2400 - Black 3200 - Tan 3600 - Wine/Brown 4000 - Teal 6000 - Purple 8000 - Royal Blue 12000 - Grey Suitable for wood and acrylic blanks . -
Faceplates are the ideal tool for mounting larger or heavier work, for turning across the grain. This cast iron faceplate is precision machined on external faces to a tolerance of 1/1000th of an inch for each inch of radius and CNC turned for exceptional accuracy and balance. It features concentric circular grooves to aid the centralising of smaller workpieces. -
The round is a general purpose cutter for the rapid removal of material inside and outside bowls and hollow forms. It works equally efficiently on spindle work. The detail point offers an excellent choice for roughing down square stock to round and for creating fine detail, while the square is useful for generating square shoulders on tenons. It is also excellent for spindle work. Both the square and round cutters deliver an extremely fine finish that requires little or no sanding when the TurnMaster is switched to shear scraping mode. Manufactured with the highest quality micro grade tungsten carbide these cutters will provide incredible durability and endurance. Sharpening: Use a diamond file or diamond plate flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a diamond belt or on a grinding wheel using diamond or other high density abrasive material. Sharpens to: 0.7 microns Hardness: 90 RC Material: micro grade tungsten carbide Related Products: These cutters are designed specifically for the TurnMaster -
Zebrano is a hard, dense and heavy wood with high strength properties and very high stiffness. It works well with hand tools and in most machining operations. Planing can be tricky, since interlocked grain can tear badly, so sanding is advised for a final finish. Gluing is satisfactory if care is taken. -
This robust material is designed to handle the demands of all steels. Not strictly ‘grit sizes’ these belts are built using brick and pyramid abrasive shaping. The highest 3000 ‘grit’ size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels. -
Crown Square End Scrapers are ideal for finishing both flat bottomed and convex projects. The square blade can also be shaped by the user to suit their own requirements. -
Out of stock
Crowns heavy duty Scrapers 1 1/2" 38mm x 3/8" 10mm help keep vibration to a minimum. -
A stylish one-piece elegant looking twist pen. For this pen use sierra pen bushing set and 27/64 drill bit. -
The finest of Steel Wool, very low crumble and virtually oil free to ensure there is no contamination of your work. Use it after sanding with abrasive sheets to give an ultra smooth surface, or to apply waxes to smooth the timber whilst applying a thin coat. Steel Wool burns very quickly and easily; keep it away from sources of combustion (i.e. sparks etc). Always use a knife or scissors to cut Steel Wool -
A penetrative, nourishing, quality finishing oil which reflects the original, heavy-oil formulations that traditional Danish Oils were renowned for. As a clear finish will richly enhance the existing woodcolour/s. For best results, requires quality dry-sand surface preparation; using 600 /1200 / 1500 grit papers (the finer the better) Upon curing/drying (min. 14 days) makes for ideally prepared surface for further (optional) Waxing/Polishing.
-
Melamine Lacquer can be a bit fiddly to apply and there’s no better way than spraying it. If you don’t have access to spray equipment then this aerosol version is the ideal way.
Melamine Gloss Lacquer will quickly build to a bright gloss finish and dries in a matter of minutes.
Touch dry and safe to handle within five minutes the lacquer chemically cures to give a tougher finish. The lacquer achieves practically all of this (about 90%) within seven days, after which the process slows and can take up to another two weeks to fully complete.
Best used over a Cellulose Sanding Sealer (brushing or aerosol) and can be overcoated with a wax for a softer tactile feel.
-
Liberon Black Patinating Wax is used for adding a coloured finish, highlighting areas or creating striking effects on all types of interior materials. It is ideal for ageing modern furniture, disguising repairs to old and new furniture, and highlighting areas on finished pieces and decorative carvings. It is suitable for use on wood, metal, gilt, plaster, tone, MDF and papier-mâché. -
Hampshire Sheen Pen Turners Overcoat is a 100% microcrystalline stick for pen turners who enjoy the benefits of this special wax on their turned pens, be them wood or otherwise. It applies over any finish the turner favours to give a fingerprint resistant, glossy shine. -
Hampshire Sheen Intrinsic Colours being water based, they are non-flammable, environmentally friendly and afford you a long working time. They sink deeply into the wood and preserve the appearance of the figure in the wood, releasing the hidden subtleties. Apply more than one coat of dye to build up depth of colour, and add a black or earth undercoat for an even more dramatic effect. For the adventurous colourist, Intrinsic Colours can be mixed together to create even more shades or thinned with water for a lighter shade. -
Replacement for the main filter on Record Power high filtration dust extractors. -
A plastic dust collector hood with a wide mouth at one end and a round hose connection at the other. Suitable for use with standard 100mm diameter flexible hose. You may need a hose clamp to secure the hose to the round end (100HC). Ideal for Collecting dust and chips from small lathes, sanding discs or any other machinery which did not originally come supplied with a purpose made dust collection point.
If being used with a multiple branch hose system, a shut off gate (100G) can be attached using a sleeve (100SL) to join the two parts together. A hose can be attached to the other end of the gate and secured with a clamp (100HC).Charnwood DH250 Specification Mouth Opening 250mm x 110mm Hose Connection 100mm Diameter Depth 230mm -
Out of stock
The wood has good wearing properties and resistance to abrasion because of its interlocked grain and twisty nature. Olive does polish to an excellent finish. -
Out of stock
For anyone turning salt and pepper mills using a CrushGrind mechanism, this is an essential tool in obtaining the correct depth and size of recesses needed to enable the mechanism to work correctly. The step or shoulder of the tool gives an accurate position of the recess required for the base section of the mill. The small V notch on the right hand side allows the other groove to be produced in the top section when it is lined up with the outer face. The CrushGrind tool will give accurate and effortless results time and again. -
Out of stock
Elipse P3 Replacement Filter Kit is a pair of replacement filters for the Elipse P3 half face mask. Surpassing the European standard EN143 by achieved 99.98% filtration at 0.3 micron. It is therefore ideal for woodturners and woodworkers, giving complete protection, even when sanding. Can be used with Elipse models SPR501, SPR502 & Integra SPR406 Made in the UK. -
Skip tooth pattern to suit BS300E. Also fits Startrite 301S/301E, Poolewood 1402, Scheppach Basato 3 -
gold coloured pen and trumpet for desk set. -
This modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Six different rests are available: 4", 6" and 9"as well as a 9" curved internal and external and a box platform which can be used in conjunction with just one stem. Cross bars are specially hardened to avoid those troublesome nicks and to give a smooth finish. Stems are available in ½", ⅝", ¾", ⅞", 1", 25mm, 28mm and 30mm diameters to fit most popular lathes. The same stems are compatible with the Precision Boring System. -
Tung Oil, or Chinese Wood Oil as it’s sometimes called, is a natural oil derived from the seed of the nut of the tung tree. The jury is out as to whether it can spark a nut allergy. Tung Oil air dries to form a tough, hard film that has a fairly strong amber tint. Because it doesn’t have any solvent or driers in it it can take a while to dry, and dependant on conditions this can be up to a week although 48 hours is more common. As with most finishes a thinner coat will dry quicker. Normally applied with a brush or cloth. -
These compounds are designed to co-ordinate with the cloth used in the Buffing Wheels and Dome Buffs to give an exceptional cut and prepare the surface to a very smooth finish prior to using wax. Compound 1 -the brown one – (sometimes referred to as tripoli) is used with the ‘A’ Wheel/Dome to help smooth the applied finish. Avoid overloading the wheel/dome where possible to prevent a build up of the compound. If this happens it can be removed by either washing in soapy water or abrading the edge of the wheel with a coarse abrasive. Do not use on very open grained light coloured timber as the compound can get lodged in the grain and colour the piece. Compound 2 – the white one – (sometimes referred to as white diamond) acts as a cleanser to remove any traces of Compound 1 left on the surface (but not from the grain) and also has a very fine abrasive contained in it which smooths the work, leaving a semi-gloss finish and a superb foundation for the top coat of wax. Use Compound 2 sparingly, too much on the wheel will result in smears on the surface of your work which can be removed with buffing but this can be very time consuming and frustrating. It’s always best to apply a little and add more if needed. -
This creamy liquid has a very mild abrasive within it which acts like ‘liquid sandpaper’ on finished surfaces, cutting back and cleaning the finish and elevating it to a glossier, brighter finish. It can be used to smooth Cellulose Sanding Sealer prior to applying wax or Friction Polish, or, after allowing a suitable time to dry, on any of the lacquers, Friction Polish, Finishing Oil or Hard Wax Oil. A deep finish can be achieved using Burnishing Cream on a coat of Melamine Lacquer, then a coat of Friction Polish and finally the Burnishing Cream again. Use it sparingly so as not to over lubricate the surface and be sure to shake the bottle before use. It is not advisable to use a lacquer on top of a surface that has had Burnishing Cream used on it. -
Six replacement paper motor filter bags for CamVac extraction machines. -
This plastic connector can be used for stepping up or down in hose sizes. It can also be used for connecting a hose line to machinery with a different sized outlet. -
Featuring a specialised dovetail profile, these jaws are ideal for turning large bowls, green timber and hollow vessels. They combine the profile of our previously popular 100 mm dovetail jaws with a deep body and internal teeth to improve versatility. The outer dovetail jaws are ideal for large bowls or platters, particularly when gripping onto a spigot and the deep internal toothed body is ideal for large spigots of large hollow vessels. Expansion: 94 - 114 mm Contraction Spigot: 76 - 95 mm Contraction Square: 54 - 74 mm -
Forstner Extension bar shanks are available in two sizes, to suit Planet's long series saw tooth forstners: 3/8" collar /200mm long Forstner Extension Bar. For sizes 3/8" to 2" 1/2" collar /280mm long Forstner Extension Bar. For sizes 2 1/4" to 4" -
Standard fastenings spares kit for the Record Power SC3 and SC4 chucks. The kit contains 8 hex socket head screws for jaws, 3 and 4 mm hex wrenches and a blind set screw and fibre washer for chuck inserts. -
These jaws are able to hold the smallest work pieces. The convex internal radius on each jaw is designed to avoid damage to small and fragile work. It allows the user to get very close to support thin work as safely as possible. It also allows good access to work close to the base of a work piece without the tool fouling on the jaws. For maximum support always ensure the workpiece features a spigot long enough to be supported along the full length of the jaws’ internal surface. SC1 Contraction Spigot: 4 - 11.5 mm Contraction Square: 4 - 11.5 mm SC2 Contraction Spigot: 4 - 25.5 mm Contraction Square: 4 - 25.5 mm -
Sharpening: Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.2 -0.4 microns Hardness: 62 RC Material: M2 HSS Related Products: These cutters are designed specifically for the TurnMaster -
Out of stock
The slim blade allows for a very fine parted section to be achieved. This is especially useful when grain match after parting is required. e.g. parting a lid from its box. The blade is 1¼" deep giving strength to such a thin section which eliminates flex and vibration. -
Bocote is a wood that resembles rosewood and hence it is often called Mexican rosewood. It is found throughout much of South America and Mexico. It is used for turning, inlays, furniture, tool handles, cabinetry, decking and veneers. -
Interior use only, initial tack time 30 mins, setting time 24 hours approximately. Open time 5 minutes, assembly time 10-15 minutes, shelf life 12 months (kept airtight). -
The ideal way to experiment with the different colours available to decide which ones you prefer, the Spirit Stain Kit contains one bottle (min. contents 25ml) of each of the nine colours. These are exactly the same stain as in the bigger bottles and will intermix if you want to vary the shades available.
The stains are very fade resistant, quick drying and non-grain raising. -
Shellac Sanding Sealer is the traditional way of sealing timber prior to applying a polish or a wax.
Chestnuts version has a high percentage of real shellac which means it does the job extremely well, dissolved in an ethanol solution to make it easy to apply and quick drying.
Applied by cloth, brush or spray it dries in about 20 minutes, making it very popular for cabinet and architectural work as it is easy to keep a wet edge running. It is also popular with woodturners and highlights the natural grain of the timber extremely well.
Sand back lightly after application and apply Friction Polish, French Polish or any of Chestnuts waxes on top.
Conforms to EN71 Part 3 – suitable for toys and nursery furniture.
-
Gilt Creams are a creamy, waxy paste with metallic flakes and pigments in them, giving a rich, lustrous finish to whatever they are applied to. The can be used for a ‘limed’ effect over a lacquer to give a high contrast effect, or uniformly over a piece and polished to a bright shine once dried. Available in- Gold
- Silver
- Copper
-
These Dispensing Nozzles are, in fact, almost indispensable! They fit onto any of Chestnuts' plastic bottles in the 250ml, 500ml and 1 ltr sizes, simply replacing the existing cap. Cut the tip off to the size you want and use the handy cover to reseal them when not in use. A useful by product of using these is that if you knock a bottle over the amount you lose through the small nozzle will be much less than without it. Just don’t forget to take the nozzle off the bottle before you throw it away so that you can re-use it! These nozzles are not child resistant, the correct closure should be replaced when the product is not in use. -
Manufactured in the UK, the filter is made of EU4 grade, non-woven, thermally bonded polyester fibres. It has a 'G4 arrestance rating of 90%', the filters are very easy to replace. As a general rule-of thumb filters should be regularly checked and replaced every 6-12 months. -
Remounting jaws are incredibly popular due to their flexibility. They work in both contraction and expansion modes and can be fitted behind other jaw sets to create bespoke setups to make turning more efficient. The soft stoppers are designed to hold without causing damage, making them ideal for remounting finished or partly finished objects for further work. Expansion: 95 - 215 mm Contraction Spigot: 59 - 170 mm Contraction Square: 53 - 154 mm -
2" velcro backed abrasive sanding discs & arbors, includes 6 x 47 arbors. 4 Spare pads (2 soft red, 2 normal). 20 each x 50mm indasa Velcro discs in grits, 120,180,240,320,400 & 600G -
Bocote(Mexican Rosewood) is dark green brown timber with a white sapwood. Easily turned to a very fine finish. -
Clear waste bag to fit the CamVac GV286W Compact Wall Mounted Extractor series of machines. -
Only the heartwood of cocobolo is used; it is usually orange or reddish-brown, often with darker irregular traces weaving through the wood. The heartwood changes colour after being cut, and can be polished to a lustrous, glassy finish; being quite dense, sometimes having a specific gravity of over 1.0, it will sink in water. The sapwood (not often used) is a creamy yellow, with a sharp boundary between it and the heartwood. -
The SC1 and SC2 are the first mini-chucks on the market to offer woodturners a premium-quality solution for those who regularly turn small, intricate items - bringing the world-renowned quality of the SC3 and SC4 to the mini-chuck market. The SC2 is a direct-thread chuck and features a larger diameter body than the SC1, at 63.5 mm (2 1/2”), giving larger holding capacities than the SC1. -
The Diamond Point cutter has 15mm long edges, perfect for fine detailing, deep vee cuts, and the side edges can refine convex curves. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
A plastic dust collector hood with a wide mouth at one end and a round hose connection at the other. Suitable for use with standard 100mm diameter flexible hose. You may need a hose clamp to secure the hose to the round end (100HC). Ideal for Collecting dust and chips from small lathes, sanding discs or any other machinery which did not originally come supplied with a purpose made dust collection point.
If being used with a multiple branch hose system, a shut off gate (100G) can be attached using a sleeve (100SL) to join the two parts together. A hose can be attached to the other end of the gate and secured with a clamp (100HC).Charnwood DH410 Specification Mouth Opening 410mm x 320mm Hose Connection 100mm Diameter Depth 260mm -
When more than one hose branch is being used, it is advisable to close off all the inactive lines using these gates to ensure maximum airflow along the active line. These aluminium blast gates are far stronger than the plastic ones and are therefore more suitable to a trade or professional environment. The centre plate simply slides between the open and closed position and can be locked in position. The blast gate has two 100mm (4") connections. Our 100mm hose can be connected directly and secured with a hose clamp, 100HC. Blast gates can be attached directly to a 100mm diameter outlet on a machine using a tapered joining sleeve, 100SL. Gates are also commonly attached to a splitter (T-Branch or Y-Branch) using a tapered joining sleeve. You can mount the gate wherever is the most convenient position. -
metal hands plus matching black second hand -
Crown Round Nose Scrapers are perfect for achieving a smooth finish after shaping has been completed by other tools. -
The Sandmaster is an essential part of every turner's tool kit. It comes with 5 different grits of abrasive to take even the roughest projects to a glass-like finish every time. It avoids an uneven finish often associated with hand sanding and there is no danger of catching hands on the revolving project. There is little or no surface damage/head build-up, as there is with power sanding and there is no cable to trip over. Head articulates to access even the most difficult areas. Sponge head is ideal for working in tight spaces. Sandmaster creates a fraction of the dust generated by power sanding. It can be adapted to take a polishing mop. -
820h Round nose scraper 1/2inch ; 830h Parting tool 1/8 inch ; 840h Spindle gouge 3/8 inch ; 842h Bowl gouge 3/8 inch ; 843h Roughing gouge 3/4 inch ; 810h Standard Skew Chisel 3/4 inch -
A refined Beeswax and Citrus Oil polish with pleasant aromatics and emulsified into a ready-to-use paste. For the palest, brightest cabinetry finish offered in our range; a double wax application and polish (min. 24 hours apart) to raw, fine-sanded woodwork would be recommended. -
Mylands wax polishes are manufactured from the finest natural ingredients including pure Beeswax and Carnuba wax. Mylands wax will help hide any surface scratches and produce a deep traditional sheen. On polished surfaces use sparingly and buff within a couple of minutes. -
Quick drying Microcrystalline Wax is an ideal protective finish for many different projects and has many uses besides wood. Both Fingerprint and water resistant, Microcrystalline Wax is a hard wearing overcoat to wax and other finishes for an extra level of gloss and protection to your decorative wood items. Just a little of the product goes a very long way, so use it sparingly! -
Use as a wipe on sealer (2 coats) prior to applying High Build Friction polish or Melamine Lacquer. Very quick drying (3-6 minutes). -
This kit gets you started on the road to buffing – all you need to supply is the lathe, a chuck and something to buff! Inside the kit you get the mandrels for holding the Buffing Wheels in the chuck. One of each buffing wheel (A, B and C) are included in the 8 inch size, complete with all the fixings attached to fit into the Mandrels. A bar of each of the compounds is included to get you started, these will last a long time so no need to worry about getting spares yet (although all of the items in the kit are available separately when you need to get them). Next is a stick of carnauba wax for that final gloss finish. Last but not least is a full set of instructions on how to use the kit to get the best from it. -
If you need to get away from the smell and flammability of our cellulose based lacquers this is an ideal option.
This water based lacquer has virtually no smell and is totally non-flammable. Don’t be fooled though, this product is extremely hard wearing and gives a full gloss finish.
Being water based it is slightly slower drying, taking about twenty minutes to be touch dry. If you want to apply a second coat it should be left two hours before doing so, although a wax can be applied if required after about thirty minutes.
This product can be sprayed if suitable equipment is available, or can be applied by cloth or brush. We recommend foam brushes for application as this keeps the foaming action of acrylics to a minimum.
-
metal hands plus matching black second hand -
Arabic Plastic numerals in gold. -
These nylon jaws are designed specifically to be cut with standard turning tools. They can be easily shaped to create bespoke jaws to fulfil exacting requirements and offer excellent grip without marking the work piece. Diameter: 118 - 140 mm Depth: 26 mm -
These new jaws are ideal for heavy bowls and vases. The wide front face provides a good register for the base of the bowl or vase and the deep toothed body provides strong grip on the spigot. The internal gripper can also be used on smaller rough green timber. Also featuring an external dovetail in expansion, they can be used for large platters. A truly versatile and solid jaw set. Expansion: 81 - 102 mm Contraction Spigot: 46 - 65 mm Contraction Square: 33 - 54 mm -
1" x 20' abrasive in a convenient dispenser. Perfect for spindle, pen, or any turning where small strips are needed. This convenient dispenser is loaded with four or 1" x 20' rolls of cloth backed aluminum oxide abrasive. Each dispenser pack contains one roll of 150, 240, 320 & 400 grit abrasive. Just pull out and tear off the length of abrasive strip you need. -
Weight: 1100Kg/m3.One of the first and finest ebonies in common use and probably overused in the past. This stock is taken from new growth logs and is therefore subject to stringent export regulation that, along with the small log sizes somewhat limits the range of sizes that can be offered. -
Out of stock
Heartwood is a vivid red when freshly cut, toning down to a medium to dark purple-brown on exposure, often with fine black lines. Sapwood is wide and greyish-white. Straight to interlocked grain with course texture. Finishes very well, tends to be dusty. -
Wild African Olivewood has unique grain patterns which make it attractive for various woodturning projects. -
Ever wished you had a finish that was as easy to use as shellac but with the durability of polyurethane? Well wish no more, because here it is.
This unique Hardened Shellac creates a film with a high resistance to heat, water and alcohol, yet it is used in exactly the same was as any normal shellac. It can be applied with a rubber as French polish, brushed, sprayed and dipped.
HOW IS THIS POSSIBLE? After shellac has been dissolved in ethanol* it is possible to introduce additives that cause the shellac to cross link after it has dried. This cross linking takes about 20 days to completely cure, less in hot weather.
USES: Ideal for table tops and other horizontal surfaces such as dresser and desk tops, etc. Also brilliant for use on guitars, lutes, harps and many other musical instruments where a traditional finish is required and good resonance qualities are essential.
NEW IMPROVED FORMULA In February 2009 U-beaut began adding a plasticiser to Hard Shellac. This gives elasticity to the cured finish, to combat crazing on the thin walls of musical instruments, whilst still having the same high resistance to marking from water, alcohol and heat it has always had.
-
Liberon Finishing Oil is a blend of high quality oils for use on all interior wood and turned woodwork. Used to nourish and enhance the colour of the wood, it is suitable for use on kitchen tables and bathroom furniture, and can also be applied to cork, stone and terracotta. Water, heat, alcohol and food acid resistant, it gives a matt, satin or gloss finish depending upon the number of coats applied. Ideal for surfaces requiring a hard wearing and water-resistant finishes. -
Record Power Bowl Gouges feature an improved flute profile, designed to help clear shavings quickly for more effective and faster cutting. -
A good quality tailstock live centre is an essential accessory when turning between centres. Unlike traditional stationery centres, a live centre rotates with the wood, eliminating burning and increasing hold. All Record Power live centres feature high quality bearings to give long life and resist pressure during use. Sealed for life bearings ensure reliable, long lasting operation. -
NyWeb pads are a non-woven nylon webbing with an abrasive – either silicon carbide or aluminium oxide – embedded into them to give an exactly defined cut.- The Green pads are 400 grit
- The Red pads are 600 grit
- The Orange pads are 1000 grit
- The White pads do not contain an abrasive and are thus technically non-abrasive, but the very texture of the pads gives them an incredibly fine – but immeasurable – cut.
-
These unstitched, cotton mops are ideal for polishing the insides of bowls and boxes etc to achieve the same great finish on the inside as on the outside when using the Buffing Wheel kit, without the fear of the item being snatched from your hands by the larger Buffing Wheels. All of the domes share the same thread as in the large mandrel and the small mandrel so all parts are completely interchangeable. Due to the smaller size of these dome buffs they will require more time and sometimes more speed on the lathe to be able to match the finish given by the larger wheels. Dome Buff A is used with compound 1 to cut back the applied finish and remove any minor blemishes left behind by sanding. Dome Buff B is used with Compound 2 to cleanse the piece and also to prepare for the final polish coat by giving an exceptionally smooth surface. Dome Buff C is used with either the Carnauba wax stick, microcrystalline wax or Microcrystalline Wax Stick to give a wonderful, long lasting shine. -
Out of stock
Purpleheart has a creamy white/gray sapwood but like its name suggests, the heartwood is a bright, striking purple when freshly cut, darkening into a deeper purple with age. It has a medium to fine texture with a lustre that ranges from medium to high; its grain is usually straight but can be wavy or irregular. Purpleheart has high bending and crushing strength and stiffness with medium resistance to shock loads. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Gift Card available to use against any product or course. -
Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset. -
Out of stock
The Elipse range of respirators are made in Great Britain. The mask body is made from TPE (Thermo Plastic Elastomer) a flexible material which is designed to fit the contours of the face to provide a tight seal. The filter material is known as HESPA (High Efficiency Synthetic Particulate Airfilter). Together they provide absolute protection for woodworkers. The Elipse P3 has the highest classification for a particulate filter. Surpassing the European standard EN143 by achieved 99.98% filtration at 0.3 micron. It is therefore ideal for woodturners and woodworkers, giving complete protection, even when sanding. The twin filter arrangement consists of a light weight half face mask that is comfortable to wear for long periods of time. The low profile filters provide an unobstructed field of vision. Two adjustable elastic straps securely fasten the mask to the wearer. The two strap system allows the wearer to quickly put the mask on and off the face, whilst still wearing it around the neck. Can be worn with glasses ,without causing any steaming, and other PPE safety products including visors and helmets. It is perfect for everyday use by hobby and professional users. Other applications include metalworking, welding and stonemasonry. The Elipse P3 provides protection against dust particles, metal fumes (smoke), asbestos, oil and water mists, vapours, bacteria and viruses. Replacement filters are easily fitted. -
The ideal beginners set. These small carving tools, made from high quality hardened and tempered Carbon steel, are fitted with stained Beech handles. The ready honed blades feature 5/16" 8mm Square Chisel, 5/16" 8mm Bent Square Chisel, 5/16" 8mm Skew Chisel, 3/16" 5mm Straight Gouge, 5/16" 8mm Bent Gouge and 3/16" 5mm Bent 'V' tool. -
Spiralling/Texturing system includes 1 x 18 tooth texturing wheel, 1 x 18 tooth spiralling wheel and 1 x 30 tooth spiralling wheel. -
For removing ridges on the inside of the bowl. -
Cover to hide the screws holding the fixing plate to the wood.
-
2 tier cake stand holder. -
Used to protect the electrical cable against damage from sharp edges.
-
Bushes suitable for Sierra twist pen (pack of 2).
