-
Out of stock
Crowns heavy duty Scrapers 1 1/2" 38mm x 3/8" 10mm help keep vibration to a minimum. -
These unique tools developed by the well respected North American woodturner, Dave Hout, are used for making finished cuts when producing bowls. The cut is shear and leaves the end grain smooth. With practice, sanding can be all but eliminated. The two tool set consists of one tool with a deeper flute to be used on bowls up to 5" -6" in diameter. The shallower tool is for use on bowls 6" and larger in diameter. -
Crown roughing out gouges are traditionally made hot forged gouges are ground and finished by hand. The ideal tools for preliminary work to produce a round shape from square edge spindle stock.
-
Out of stock
An ideal workhorse for the busy workshop where power and generous capacity are required but budget and space do not allow a bigger machine. This features an open legstand, often requested by our users as it provides greater stability and can be used with an optional pedal style wheelkit. A basic wheelkit is provided as standard. The bandwheels are cast iron and dynamically balanced with precision ground, crowned rubber tyres usually only found on much more expensive industrial machines – the flywheel effect of the cast iron wheels improves cutting performance and speeds. Our tables are some of the largest in their category and a one piece cast double trunnion has been designed to provide even greater support and rigidity. The rip fence is the strongest and most industrial in its category with a chromed fence and the mount machined from a single piece of cast iron. The extrusion itself is a heavy section to provide rigidity and accuracy.
-
Crown Parting Tools are a range of parting tools to suit all projects. -
Crown Diamond Parting Tools are a range of parting tools to suit all projects. -
Crown Beading & Parting Tool form part of the range of parting tools to suit all projects. -
Crown 3/16" Fluted Parting Tool (5mm) is part of the range of parting tools to suit all projects.
-
Crown Spindle Gouges are their range of milled regular English gouges, are available in their range to suit all requirements for Spindle work. -
Crown Forged Spindle Gouges range of European style are tools in their range to suit all requirements for Spindle work.
-
Crown's H.S.S. Shallow flute 'Detail' Gouges are ideal for cutting coves and beads. The shallow flute permits a smoother cut and gives less vibrations due to more metal being under the flute. -
Crown Standard Skews are part of the range of skew chisels that are one of the most comprehensive available worldwide. -
Specially developed to allow the blade to move more easily along the tool rest than normal rectangular shaped chisels. -
Sale!
Designed in conjunction with the professional British woodturner, Albert Harrison, this tool is excellent for cleaning out small boxes and goblets, giving an extremely clean finish. -
Sale!
Another 'Crown' special, the Wedge tool is 'user friendly'. Superb for making coves on spindle work and finish cuts on both faceplate and spindle projects. It also provides a smooth finish when making goblets. A recent innovation, the Splay Tool can be used as a Skew Chisel, a Box Scraper, a Shear Scraper and also for detail work on spindles. -
The Splay tool can be used as a skew chisel, a box scraper, a shear scraper and also for detail work on spindles.
-
These tools are made specifically for producing rings that are captured by the workpiece and feature a double bevel which results in only one tool being necessary to complete a ring. -
With a dual bevel 'Cryogenic High Speed Steel' ring, these tools provide a superb finish when hollowing into end grain. Flat or curved shapes can be accommodated easily.
-
Designed for deep hollow forms these tools have a polished H.S.S. adjustable top section which gives complete control on the depth of a cut.
-
These unique tools were developed with the help of 'Bill Jones' and come with a full instructional brochure. -
When making CrushGrind peppermills it is necessary to create an accurate recess within the mill body, into which the mechanism clips, retaining it in place. This tool from manufactured from High Speed Steel, is specifically designed to cut a suitable recess.
-
Out of stock
Another 'Crown' special, this long boring tool is made completely from High Speed Steel with a spiral flute, which results in removing wood easier and quicker than ordinary Augers. -
Spiralling/Texturing system includes 1 x 18 tooth texturing wheel, 1 x 18 tooth spiralling wheel and 1 x 30 tooth spiralling wheel. -
Out of stock
Crown Hand Tools Miniature Spiralling system, complete with a 17 and a 27 tooth wheel.
-
Sale!
A wet stone sharpening system with a range of jigs and accessories and is also an extremely useful tool for general household tasks, such as the sharpening of knives, gardening tools and many other items. Included in this package is the WG250/K Diamond Trueing Tool, an essential accessory to ensure the outer diameter remains concentric and the sharpening surface perfectly flat. For more details and to see a video click on more info button. -
Sale!
Included with the machine are a range of essential tools and jigs, not only making this package fantastic value for money but also allowing accurate sharpening straight from the box. A full range of optional jigs and accessories are available which are compatible with the 12 mm bar system of the Record Power WG250. The WG200 features smooth and responsive variable speed. The torque can also be adjusted, enabling heavier grinding without fear of the stone or honing wheel slipping under pressure.
-
Sale!
This package contains all the sharpening jigs needed for woodturning tools and offers excellent value for money. Contains: WG250/A Gouge Jig WG250/B Short Tool Jig WG250/I Tool Rest Jig WG250/N Profiled Leather Honing Wheel
-
The ProEdge Deluxe system includes a skew jig, a standard gouge jig, a fingernail profiler and three different belts in addition to the basic system. -
The Robert Sorby ProEdge takes all the guesswork and effort out of sharpening all your woodworking, woodturning tools. The ProEdge has an abrasive belt which is a quick and efficient method of putting a keen edge on each and every tool. The cool running belt avoids any overheating. The ProEdge comes complete with aluminium oxide and zirconium belts. The ProEdge requires no complex assembly - it can be plugged in and used straight from the box.
-
This robust material is designed to handle the demands of all steels. Not strictly ‘grit sizes’ these belts are built using brick and pyramid abrasive shaping. The highest 3000 ‘grit’ size will sharpen to two microns (the same sharpness as a disposable razor blade) and provide a factory finish on all steels. -
Outside caliper with fine adjustment for measuring spindle diameters when turning between centres.
-
Outside caliper with fine adjustment for measuring spindle diameters when turning between centres. -
This hardwearing material is a great choice for profiling and re-profiling damaged tools. The heavier 60 grit option is an efficient choice for removing plenty of material, while the finer 120 grit will provide a satisfying finish. Great longevity and highly practical. -
Applied to a buffing mop the honing paste creates a highly polished finish on any steel. -
Out of stock
The pigtail mandrel is used to mount the Buffing Mop to the ProEdge sharpening system. -
Out of stock
The buffing mop gives that extra fine edge. -
Achieving the exact bevel angle on any fingernail or long grind gouge has never been easier than with the Robert Sorby Proset. -
40 micron -
Sale!
The new DML320 lathe offers fantastic value for money, being compact and powerful yet with very generous capacities for a medium sized lathe, giving woodturners the chance to own a high quality variable speed machine at an unbeatable price. The solid cast iron bed, tailstock and headstock offer superb stability, even when turning items at the limits of the lathe’s considerable capacities. At the heart of this machine is the high quality electronic variable speed function, giving smooth and responsive speed change at the turn of a dial, with a highly accurate digital speed readout. The 3 pulley system ensures excellent torque across the full range of speeds and is powered by a high quality and vibration-free motor. The DML320 is also capable of reverse turning, ideal for achieving a perfect finish when sanding.
-
Out of stock
Featuring a spiral twist, these plain end HSS blades can cut in any direction without the need to turn the workpiece. This is particularly useful for projects that are too big for the throat depth of the scroll saw. They also allow for pieces to be cut with the bevel running in the same direction all round. 0.8 mm wide, 0.34 mm thick, 40 TPI. -
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 20 TPI. -
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 15 TPI.
-
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 10 TPI
-
The width of these pin end blades makes them ideal for straighter and more arduous cuts, such as deep hard woods. The tooth pattern makes them ideal for faster cutting as they provide better chip clearance than standard tooth patterns. 3 mm wide, 0.5 mm thick, 9 TPI. -
The width of these pin end blades makes them ideal for straighter and more arduous cuts, such as deep hard woods. The tooth pattern makes them ideal for faster cutting as they provide better chip clearance than standard tooth patterns. 2 mm wide, 0.25 mm thick, 18.5 TPI.
-
The skew jig is for accurate sharpening of woodturning skew chisels. -
Out of stock
The standard gouge jig allows easy sharpening of all standard ground woodturning gouges. -
The woodworking chisel jig accurately ensures a straight cutting edge on any woodworking chisel. -
The long grind jig helps you create three different fingernail profiles on bowl and spindle gouges. -
The cutter holder is a great and inexpensive sharpening accessory. Being double ended it allows the turner to hold comfortably almost every Robert Sorby tool tip without the fear of catching fingers on a sharpening belt or grinding wheel.
-
The honing wheel arbor mounts the Honing Wheel to the ProEdge sharpening system. -
The abrasive honing wheel that can be shaped to allow honing of gouge flutes, especially useful for the woodcarver. -
Divider with fine adjustment for measuring between two points, scribing circles prior to turning, marking along a spindle etc. -
Inside caliper with fine adjustment suitable for measuring internal dimensions, eg turned boxes.
