-
Metal holders require a hole approximately 42mm diameter x 17mm deep. The glass holder requires a hole approximately 48 mm dia x 26mm deep . Available in a glass, brass, copper and polished steel finish. -
Sheffield stainless steel stamped cheese knife : large blade length 110mm, overall length 150mm including tang. small blade length 75mm, overall length 107mm including tang. Simply add a wooden handle. -
Gold finish candle holder cup. 30mm deep with 10mm mounting hole in base. External diameter top, 24mm tapering to 22mm at bottom. Internal diameter top, 22mm tapering to 20mm at bottom. 30mm diameter rim at top. -
Wooden Pen blanks measure 5" or 6" long x 3/4" x 3/4". Available in a variety of woods. -
Perforated design which allows the dust to escape without clogging. -
Hand cast and hand painted 3 dimensional resin pot pourri/ trinket box lid. Approx 80 - 85mm diameter. -
90mm diameter tile. -
Maple pen box with rosewood ends, in a white carton for protection. -
2" wide cloth backed abrasive available in six grits, 80G, 120G, 180G, 240G, 320G & 400G. -
1/2" brass safety switched lamp holder. (Holder switches off automatically when the bulb is removed.) -
73mm dish with 10mm high spike, the spike will hold a larger candle in place. This dish can be attached to a turned wooden base. -
Fine finish starts with good preparation! Use these mildly abrasive pads after sanding for a final smoothing process to give a near-perfect surface prior to applying any finish. Very long lasting, these pads are also very flexible and do not crumble, thus avoiding contamination of your work. -
This hardwearing material is a great choice for profiling and re-profiling damaged tools. The heavier 60 grit option is an efficient choice for removing plenty of material, while the finer 120 grit will provide a satisfying finish. Great longevity and highly practical. -
Turn your own unique design handle. Bottle stopper with silicone rubber ribbed band. 70mm long x 25mm diameter tapering to a point. Fixing thread 15mm long (approx.) x 8mm diameter (approx.) -
Velcro backed 6" (150mm) wide rolls x 1 metre in 9 grits, 80G, 120G, 180G, 240G, 320G, 400G, 600G, 800G & 1200G -
2" velcro (hook and loop ) backed abrasive sanding discs. Designed to be used in a power drill but can also be used in the Robert Sorby Sandmaster. Available in 60G, 80G, 120G, 180G, 240G, 320G & 400G. -
Out of stock
Basswood is an ideal wood for woodcarvers and whittling. Its soft, fine, even texture makes it easy to work with, while its pale inconspicuous colour doesn't distract from the carved patterns of the finished product. It can take stain and polishes without difficulty. -
130mm white dial with Arabic or Roman numerals, brass diamond turned bezel ring and domed glass clock insert. Requires a hole approximately 83-85mm diameter x 25mm deep to insert mechanism into. -
Pewter pot pourri lid approx 80mm diameter. -
Perforated design which allows the dust to escape without clogging. mixed pack of 15, 3 of each of the following 5 grits, 120G, 180G, 240G, 320G 400G, 70mm x 125mm.
-
Out of stock
Wooden display box in maple and rosewood, in white carton for protection. Would suit up to 14mm (approx.) diameter pen. -
This amazing product is a cut and polish paste containing Tripoli powder, an ultra-fine abrasive. The polish is designed to be used in conjunction with Shellawax Cream and liquid formulations or as a finish in its own right on plastics (such as acrylic, resin-impregnated burr, crushed velvet, artificial ivory and similar products used for pen bodies). It can also be used after French polishing and restorers will find it useful to cut and revive previously polished surfaces. Although designed to be used directly on raw timber, bear in mind that EEE is not a finish in itself and the polished surface will need protecting by the use of some other product (such as Shellawax). EEE-Ultra Shine can be used over many other finishes such as oils and most types of varnish, enhancing the surface and giving it a smoothness and lustre with an ease that you would never have thought possible.
-
Roman Plastic numerals in gold. -
Sheffield stainless steel stamped pie knife blade : large = length 145mm, overall length 185mm including tang. small = length 75mm, overall length 117mm including tang. -
160mm white dial with Arabic or Roman numerals, brass diamond turned bezel ring and domed glass clock insert. Requires a hole approximately 83-85mm diameter x 25mm deep to insert mechanism into. -
5" x 3/4" x 3/4" colourwood pen blank -
The outer chapter ring and decorative hands display the hours and minutes. Just above the figure six, a second dial ticks off the seconds. A quartz movement drives the exposed inner workings making a very attractive clock. The skeleton clock comes fully assembled and ready to mount in a frame or base of your making. -
Sheffield stainless steel stamped bread knife blade, length 200mm, overall length 245mm including tang. Simply add wooden handle. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Gold metal bezel on a plastic case, fits a case hole of 58 to 62mm diameter x 18mm deep with spring fitting. Bezel diameter 100mm. Takes an LR1 battery. -
Quartz Clock Movement, in 4 sizes, 11mm (short), 16mm (medium), 21mm (long) and 26mm (extra long) shaft length. The body of the clock is approx. 57mm square x approx. 18mm deep. -
Out of stock
Basswood is an ideal wood for woodcarvers and whittling. Its soft, fine, even texture makes it easy to work with, while its pale inconspicuous colour doesn't distract from the carved patterns of the finished product. It can take stain and polishes without difficulty.
-
Good finishing requires a good foundation, and Cellulose Sanding Sealer is probably the best way of providing one. Compatible with everything in the Chestnut Products range that benefits from the use of a sanding sealer (which is pretty much everything apart from oil finishes!) it is superbly universal.
The purpose of a sanding sealer is manifold.
- It seals the open pores of the timber prior to the application of the next coat, meaning that more of it stays on the surface and less of the finish is needed. Not only does this make it economical, when finishing the thinner the applied coat the less likely it is to get damaged, so a sanding sealer will help the top coats be more resilient.
- Sanding Sealers also bind the loose fibres of the timber together giving a more solid foundation for the next coat, which helps make sure the final finish is able to adhere properly and thus be more durable.
- They also include a sanding agent which acts as a lubricant to make the sanding process easier – the sanding agent also stands slightly proud of the surface of the sealer and it is this that is denibbed – the sealer itself should still be intact after sanding.
-
A simple kit comprising a brass tube with a decorative finial at one end and a means of attachment for hanging at the other. They are a great way of using up your offcuts to produce some unusual designs for seasonal tree decorations at Christmas. The brass tube fits on a7mm pen mandrel. -
Super thin penetrating formula, bonds in 1 - 5 seconds. -
150mm diameter tile. -
The CrushGrind Diamond range are constructed using ceramic mechanisms. These unique mechanisms, which come complete with a 25 year guarantee, will grind salt, pepper, spices, herbs and much more. All mechanisms are adjustable with 14 settings to give an excellent range of grinds from coarse to fine.A great benefit of these mechanisms is that they are fully enclosed inside the grinding mill - There is no top pin protruding from the mill, as with traditional mechanisms and this allows for greater freedom of creativity in the design and turning of the mill.Specially designed integral ribs and catchers securely hold the mechanisms in place for the lifetime of the mill. Shafts can be cut to the exact length needed if necessary. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Letter knives or paper knives make a useful desktop tool, simply add a wooden or an acrylic handle to make a useful gift. -
Mopane is a very heavy, dense timber. Dark red/brown in colour generally streaked with black. Narrow straw coloured sapwood. Turns well with care and polishes to a lustrous finish. -
Gold or Chrome plated magnifying glass with glue on ferrule. 65mm diameter frame with 3 magnification. (inner dimensions of ferrule: 17mm x 20mm depth). -
Wire type hose clamp for securing hose to machinery or fittings. For use with matching diameter hose. -
A one-application woodturners friction polish that really does work and is ideal for use on smaller spindle work such as pens and similar objects up to around 10 cm (4") diameter. This exceptional polish is made using a specially formulated hard shellac as a base to give a harder, more durable finish, giving greater resistance to marks and blemishes from water, alcohol and heat. Normally applied directly onto bare timber (though it can be used over most oils too – but test on scrap first) this polish dries almost instantly yet goes on hardening for up to three weeks resulting in a truly durable finish which far exceeds others on the market today. Once fully cured the finish is food-safe and non-toxic. -
Wooden display case in maple for 7mm pen, in white carton for protection. -
Long series sawtooth Forstner cutter Long series forstner bit (inch), sawtooth pattern, particularly suited for cutting down the grain. Long series - all sizes are a minimum of 150mm long, will produce over-lapping holes, resharpenable. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Gold colour metal rim on plastic case with metal spring fittings. The case fits a hole 58mm - 62mm diameter x 18mm deep. Bezel diameter 65mm. -
1 metre 3 core gold flex (to order more than 1 metre change quantity column to metres required and press update basket) -
Woodturners stick wax is a mixture of beeswax and carnauba wax it is slightly softer than the Carnauba Wax Stick and therefore slightly easier to apply and there are no concerns about it marking softer woods. Applied over a sanding sealer, simply hold the stick against the revolving work and allow the heat generated to melt the wax onto the wood. Buff up straight away using Safety Cloth, using the cloth to ensure an even coating. -
metal hands plus matching black second hand -
Shellawax cream is a woodturners friction and buffing polish. Sharing many of the characteristics of Shellawax liquid, Shellawax Cream is specially formulated for use on larger turned projects where it would normally be impossible to get a first class finish using a conventional friction polish and on stand-alone articles such as carvings. As with Shellawax, only one application is required to completely finish the work. Made using a specially formulated hard shellac as a base, this excellent product gives a hard, durable finish, with impressive resistance to marks and blemishes from water, alcohol and heat. The cream formulation retards the frictional drying characteristic of friction polishes, making it suitable for use on larger lathe-turned items such as bowls and platters. Being a cream, this product is easily controlled in application and is very economical in use. Shellawax Cream is non-toxic. -
Wood Bleacher is ideal for removing dark stains caused by rust, alcohol, damp, ink, ring marks and fruit. It can also be used to lighten naturally dark wood or natural wood which has darkened through alkali stripping, staining or weathering. It does not harm the wood. -
Deep orange-brown timber with broad medullary rays creating a flame pattern on quarter cut faces or numerous spots on flat sawn surfaces. Hard and heavy with a slightly coarse texture. -
Sheffield stainless steel stamped butter knife blade, length 100mm, overall length 145mm including tang. Simply add a wooden handle.
-
Plastic Bracket for Wall Mounting Hose. For use with 100mm diameter hose, or smaller, the wall hanging bracket will allow you to fix a hose line to the wall or ceiling. Comes complete with fixing screws and raw plugs. -
African blackwood clarinet bell (reject). Dark purple-brown with black streaks, giving an almost black appearance. Generally straight grained with a fine even texture. Finishes exceptionally well. -
Pack of 10, cover to hide the screws holding the fixing plate to the wood. -
Brass colour metal candle cups, fits a 23mm hole (approx.), with a 20 mm overall height, pack of 10. -
A smart looking, traditional black velvet box with white satin lining on lid. -
Stainless steel pizza cutter. Turn a handle to create a useful pizza cutter, cutter diameter 100mm, overall length wheel and tang 150mm .
