-
Sale!
These jaws are fantastically effective for drilling pen blanks. They eliminate the need for a drill press and offer much more accurate results and the deep grip to all four sides ensures incredible holding power. Drilling on the lathe means the feed speed of the drill bit is under your complete control, meaning a superior finish can be achieved on a wide range of materials. These jaws are also useful for working on small finials and similar projects as in addition to their strong grip, the work piece is moved forward from the chuck, allowing greater access. Contraction Square: 10 - 26 mm Contraction Spigot: 11 - 20 mm Expansion: 35 - 64 mm -
The wood is a red brown which is faintly pink tinged, occasionally with a blackish streak. The texture is medium to fine and even. It weighs 975Kg/m3 with the SG at 12%. It sands and finishes well. It is a hard timber with an attractive grain but turns well and produces a good finish. Tool must be kept sharp. -
The wood is a red brown which is faintly pink tinged, occasionally with a blackish streak. The texture is medium to fine and even. It weighs 975Kg/m3 with the SG at 12%. It sands and finishes well. It is a hard timber with an attractive grain but turns well and produces a good finish. Tool must be kept sharp.
-
Sale!
This large faceplate ring is ideal for holding large bowl blanks and due to its strong hold is also suitable for more out of balance timber. It is held to the chuck using the standard 50 mm jaw set which comes complete with all Record Power chuck packages. Must be used with: 62313 50 mm Standard Jaws (Supplied with SC3 and SC4 chucks) Diameter: 100 mm -
Designed specifically with pen turners in mind. This finishing kit consists of nine different, colour coded, foam backed sanding pads measuring 10cm (4") x 8.5cm (3.1/4"). Includes the following grit sizes: 1500 - Rust 1800 - Green 2400 - Black 3200 - Tan 3600 - Wine/Brown 4000 - Teal 6000 - Purple 8000 - Royal Blue 12000 - Grey Suitable for wood and acrylic blanks . -
Fine finishing starts with good preparation! Use these mildly abrasive pads after sanding for that final smoothing process to give a near-perfect surface prior to applying any finish. Very long lasting, these pads are also very flexible and do not crumble, thus avoiding any fear of contamination of your work. Exercise care when using these pads with the lathe revolving. -
Weight: 1100Kg/m3.One of the first and finest ebonies in common use and probably overused in the past. This stock is taken from new growth logs and is therefore subject to stringent export regulation that, along with the small log sizes somewhat limits the range of sizes that can be offered. -
Sale!
Remounting jaws are incredibly popular due to their flexibility. They work in both contraction and expansion modes and can be fitted behind other jaw sets to create bespoke setups to make turning more efficient. The soft stoppers are designed to hold without causing damage, making them ideal for remounting finished or partly finished objects for further work. Expansion: 95 - 215 mm Contraction Spigot: 59 - 170 mm Contraction Square: 53 - 154 mm -
To connect 2.5" diameter ducting together. -
Sovereign Collet - pilot bored -
Fine finish starts with good preparation! Use these mildly abrasive pads after sanding for a final smoothing process to give a near-perfect surface prior to applying any finish. Very long lasting, these pads are also very flexible and do not crumble, thus avoiding contamination of your work.
-
This extremely flexible dual-purpose adaptor can be used either as a stepped power tool adaptor or to create a bespoke dust extraction port. If the dust producing machine has no extraction port, this adaptor can be attached using the four screw holes in the flange, allowing a suitable hose to be connected to it. The adaptor can also be used to connect directly to a 2.5" diameter extraction system and the stepped profile be adjusted to suit the port of the power tool. -
Sale!
Record have increased the capacity of their larger remounting jaws, whilst ensuring they can still clear the bed of lathes with the popular 12” swing capacity and are capable of holding 275 mm (10 3/4”) diameter bowls in contraction mode. Remounting jaws are incredibly popular due to their flexibility. They work in both contraction and expansion modes and can be fitted behind other jaw sets to create bespoke set-ups to make turning more efficient. The soft stoppers are designed to hold without causing damage, making them ideal for remounting finished or partly finished objects for further work. -
Velcro backed 6" (150mm) wide rolls x 1 metre in 9 grits, 80G, 120G, 180G, 240G, 320G, 400G, 600G, 800G & 1200G -
Used on bowls and platters to create smooth flowing curves. -
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed. Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle sticks and other spindle projects. -
Out of stock
This 18" tool can produce either massive profiling cuts or delicate finishing cuts as necessary, -
A must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary. -
Multi Tip Hollowing Tool incl. 2 hollowing tips and a finishing scraper. Designed specifically to fit the Sovereign System. The RS200KT multi-tip hollowing tool is one of Robert Sorby’s most versatile tools. Its massive half round shank and interchangeable tips make it capable of multiple applications. A Robert Sorby legend, this tool is a must-have for every turner’s collection. -
Velcro backed 6" (150mm) wide rolls x 1/2 metre of each of the following grits: 120G, 180G, 240G, 320G, 400G & 600G
-
A red/brown timber veined with darker red stripes. The wood is dense, with a straight to sometimes interlocking grain which when turned has a fine even texture and polishes to a high finish. -
Out of stock
A red/brown timber veined with darker red stripes. The wood is dense, with a straight to sometimes interlocking grain which when turned has a fine even texture and polishes to a high finish.
-
Sale!
These nylon jaws are designed specifically to be cut with standard turning tools. They can be easily shaped to create bespoke jaws to fulfil exacting requirements and offer excellent grip without marking the work piece. Diameter: 118 - 140 mm Depth: 26 mm -
Standard fastenings spares kit for the Record Power SC3 and SC4 chucks. The kit contains 8 hex socket head screws for jaws, 3 and 4 mm hex wrenches and a blind set screw and fibre washer for chuck inserts. -
Midi Multi Tip Hollowing Tool incl. 2 hollowing tips and a finishing scraper. Designed specifically to fit the Sovereign System. Its small scale makes it ideal for smaller hollow forms.
-
- ½" Flat surface allows for aggressive hollowing
-
- Swivel clamp allows under cutting
-
- One curved tip (RS111C) for flowing shapes
-
- A second pointed tip (RS112C) for square shapes
-
- Teardrop scraper cutter acts as a round, half round and square scraper all in one
- Full instructions included
-
-
Bocote (Mexican Rosewood) is dark green brown timber with a white sapwood. Easily turned to a very fine finish. -
Bocote(Mexican Rosewood) is dark green brown timber with a white sapwood. Easily turned to a very fine finish.
-
Self supporting extraction port and hose, ideal for woodturning, 660mm in length. This is an official LOC-LINE® product, the original and best modular hose. Suitable for 2.5" systems. -
2.5 metres of flexible hose for use with 2.5" diameter systems. -
The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system. Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way they work. Designed to quickly and easily complete many popular projects, the TurnMaster has been a huge success with both novices and experienced turners. Its unprecedented collection of parts and cutters making it the most versatile and value added single tool concept on the market today. Designed specifically to fit the Sovereign System. -
2" wide cloth backed abrasive available in six grits, 80G, 120G, 180G, 240G, 320G & 400G. -
This plastic connector can be used for stepping up or down in hose sizes. It can also be used for connecting a hose line to machinery with a different sized outlet.
