Shop

Chestnut Ebonising Lacquer 400ml aerosol

£10.10

Ebonising Lacquer is a tough, hard-wearing water-based lacquer. It is heavily pigmented so that when it is dry it emulates the classic satin look of ebony. Usually applied over a sanding sealer (either Cellulose Sanding Sealer or Acrylic Sanding Sealer aerosol) it is touch dry in about five minutes and hard dry after twenty minutes. Although heavily pigmented it is not paint and will still allow the grain of the timber to show through, rather than obliterating it completely. Liming Wax and Gilt Cream can be applied over Ebonising Lacquer to give a pleasing, eye-catching yet very simple artistic effect. If a bright gloss finish is required from Ebonising Lacquer this is best achieved by using Burnishing Cream on the lacquer with will polish it up to a high gloss. Acrylic Gloss Lacquer can also be applied on top of Ebonising Lacquer, as can WoodWax 22 and Microcrystalline Wax.

Add to cart Details Quick View
Chestnut Mandrels

£10.10 – £14.52

These Mandrels are available separately or come as part of the buffing wheel kit. Both Mandrels are made in the UK and are zinc plated for maximum protection. Due to the limitations of plating a blind hole care should be taken to ensure the tapped thread of the large mandrel stays as dry as possible. The large mandrel is designed to be held in a lathe chuck. It is 25mm in diameter at its widest part, stepped to 18mm with an undercut for smaller chucks. It can be held on either, both will still give plenty of clearance from the chuck. The small mandrel is designed to be held in a jacobs chuck or similar and is especially suited to use with the smaller 4 inch wheels and the Dome Buffs.

Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
Mopane square

£10.20 – £34.05

Mopane is a very heavy, dense timber. Dark red/brown in colour generally streaked with black. Narrow straw coloured sapwood. Turns well with care and polishes to a lustrous finish.

Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
Zap CA 1oz

£10.20

Super thin penetrating formula, bonds in 1 - 5 seconds.

Add to cart Details Quick View
Zap-A-Gap, 1oz

£10.20

Allows 7 - 10 seconds for positioning, cures in 20 seconds.

Add to cart Details Quick View
Chestnut Spirit Thinners 500ml

£10.24

This clear, slower drying solvent is primarily for thinning our Spirit Stain to give delicate wash effects without affecting the colour (as methylated spirit would). It can also be used to dilute Friction Polish or French Polish if needed (usually only when the cap has been left off and the product has thickened up). It’s also suitable for use in making french polish if you want to dissolve shellac flakes in it.

Add to cart Details Quick View
Record Jaw Fastening Kit for SC1 & SC2 Mini Chuck

£10.39

Add to cart Details Quick View
Hampshire Sheen – Lacquer 500ml Aerosol

£10.50

Hampshire Sheen - Lacquer 500ml Aerosol have been formulated to be strong, flexible and very glossy. They can be used for both internal and external projects. Glass like finishes can be achieved with these two superb acrylic spray lacquer products. Supplied in 500ml cans with 2 nozzles.

Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
Slo-Zap, 1oz

£10.75

Very high viscosity formula, super thick and super strong. Allows approximately 30 - 40 seconds for positioning. Cures in 90 seconds, ideal for gap filling. Use zip kicker to accelerate cure time.

Add to cart Details Quick View
Out of stock

Titebond III, ultimate wood glue, 8oz

£10.78

he waterproof formula provides superior bond strength, longer open assembly time and lower application temperature.

Details Quick View
Chestnut Dome Buff

£10.89

These unstitched, cotton mops are ideal for polishing the insides of bowls and boxes etc to achieve the same great finish on the inside as on the outside when using the Buffing Wheel kit, without the fear of the item being snatched from your hands by the larger Buffing Wheels. All of the domes share the same thread as in the large mandrel and the small mandrel so all parts are completely interchangeable. Due to the smaller size of these dome buffs they will require more time and sometimes more speed on the lathe to be able to match the finish given by the larger wheels. Dome Buff A is used with compound 1 to cut back the applied finish and remove any minor blemishes left behind by sanding. Dome Buff B is used with Compound 2 to cleanse the piece and also to prepare for the final polish coat by giving an exceptionally smooth surface. Dome Buff C is used with either the Carnauba wax stick, microcrystalline wax or Microcrystalline Wax Stick to give a wonderful, long lasting shine.

Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
Chestnut Iridescent Paints – 100ml

£10.89
Iridescent Paints give a change in hue, a slight colour shift when viewed from different angles and are especially effective on irregularly shaped items.

Available in nine different amazingly bright and vibrant colours –

Green

Azure

Purple

Red

Turquoise

Cerise

Pink

Yellow

Vivid Blue

The paints are water based acrylics and can be applied by brush, cloth, spray gun/airbrush or any manner of ways to give interesting decorative effects.
Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
Chestnut Metallic Paints – 100ml

£10.89

This exciting range of water-based acrylic paints comes in 8 metallic colours. Designed to add an even shimmer to your work they will really make it glow. Mix and match them, use them to highlight certain areas or cover everything in them, the choice is yours. Best used over sanding sealers, apply a spray lacquer over them once dry to seal them in. Can be applied by cloth, brush, spray gun, air brush or any suitable medium you choose!

Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
Y Connector (4″ x 4″ x 2.5″)

£10.99

Y connector for use in 100 mm diameter workshop dust extraction systems to reduce down to 63 mm. 100 x 100 x 63 mm.

Add to cart Details Quick View
Record Power Chuck Fastening Kit for sc3 & sc4

£10.99

Standard fastenings spares kit for the Record Power SC3 and SC4 chucks. The kit contains 8 hex socket head screws for jaws, 3 and 4 mm hex wrenches and a blind set screw and fibre washer for chuck inserts.

Add to cart Details Quick View
Liberon Easy French Polish 250ml

£11.00

Liberon Easy French Polish is as shellac and resin-blended polish ideal for use on furniture, carved woodwork and artefacts in rare or exotic woods. Suitable for use on small surfaces measuring 1m2 or less, it will beautifully enhance the wood’s natural finish, and produces great results quickly. Available in clear for a natural effect, it is ideal for beginners to furniture restoration.

Add to cart Details Quick View
Dust Hood 250mm x 110mm x 230mm

£11.00

A plastic dust collector hood with a wide mouth at one end and a round hose connection at the other. Suitable for use with standard 100mm diameter flexible hose. You may need a hose clamp to secure the hose to the round end (100HC). Ideal for Collecting dust and chips from small lathes, sanding discs or any other machinery which did not originally come supplied with a purpose made dust collection point.

Charnwood DH250 Specification

Mouth Opening 250mm x 110mm

Hose Connection 100mm Diameter

Depth 230mm

If being used with a multiple branch hose system, a shut off gate (100G) can be attached using a sleeve (100SL) to join the two parts together. A hose can be attached to the other end of the gate and secured with a clamp (100HC).

Add to cart Details Quick View
ProEdge Accessory – Cutter Holder

£11.01

The cutter holder is a great and inexpensive sharpening accessory. Being double ended it allows the turner to hold comfortably almost every Robert Sorby tool tip without the fear of catching fingers on a sharpening belt or grinding wheel.

Add to cart Details Quick View
2″ Velcro Arbor (soft)

£11.10
2" arbors 50mm x 6mm spindle pad with a 20mm foam, soft pad for external and shallow curves . Accepts all Velcro/loop backed abrasives including self or pre-cut squares and discs.

colour may vary
Add to cart Details Quick View
Sale!
Microplane 8″ Snap In Fine Angle Blade

Original price was: £13.96.Current price is: £11.17.
8" Snap-in Fine Angle Blade

Cuts - doesn't scrape or tear

Creates shavings rather than dust

Made from 400 series stainless steel

Cuts up to 10 times faster with less effort than similar products

Dimensions: 205mm x 30mm

Manufactured in the USA from high grade stainless steel, the unique Microplane manufacturing process creates hundreds of extremely sharp teeth for fast, smooth, effortless cutting. Durable, non-clogging and rustproof. Use to work with a wide variety of materials - wood, plastics, rubber, body filler, etc, etc. Microplanes leave a good finish, requiring only a light sanding to further refine the surface. Blade Length: 8" Size: 205mm x 30mm
Add to cart Details Quick View
Robert Sorby Sovereign Handle Extension

£11.24

The Sovereign Extension is a useful addition to the range of accessories. Custom-made during the development of the new Sovereign sets. This 4" extension adds length to any Sovereign handle. NOTE: a threaded coupler is required.

Add to cart Details Quick View
Chestnut Cellulose Sanding Sealer 400ml aerosol

£11.29

Getting a good base for your finishing is essential when you want to get a great finish. Sometimes the piece you’re working on makes that more difficult due to its shape or size or for many other reasons. Or sometimes you just want a quicker, cleaner method of applying a sealer. That’s where Cellulose Sanding Sealer in an aerosol comes into its own. Basically the same product as in the tin, it has all the same benefits of quick drying and universal compatibility, it also has the added advantage of being easier both to apply and to get an even coating. Use it before applying waxes, lacquers and polishes for a more durable final finish.

Add to cart Details Quick View
Chestnut Liming Wax

£11.29

The white pigment in Liming Wax is Titanium Dioxide (TiO2) which gives it a brilliant white finish which will perfectly highlight open grain. Use Liming Wax on any open grained timber for a dramatic and striking effect which can be emphasised by using a stain or Ebonising Lacquer first. For an even better result use the Liming Brush first to open up the grain, allowing more Liming Wax to enter; spread the Liming Wax over the whole surface and then wipe off after a few minutes. The Liming Wax will stay in the open grain and the effect will be instantly visible. Whilst Liming Wax is a wax (obviously!), the wax is mainly a carrier for the white pigment. Therefore an overcoat of some kind is needed. WoodWax 22, Microcrystalline Wax, Finishing Oil or Hard Wax Oil are ideal for this and will lock the wax in place whilst keeping it clean and bright.

Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
Chestnut Melamine Gloss Lacquer 400ml aerosol

£11.29

Melamine Lacquer can be a bit fiddly to apply and there’s no better way than spraying it. If you don’t have access to spray equipment then this aerosol version is the ideal way. Melamine Gloss Lacquer will quickly build to a bright gloss finish and dries in a matter of minutes. Touch dry and safe to handle within five minutes the lacquer chemically cures to give a tougher finish. The lacquer achieves practically all of this (about 90%) within seven days, after which the process slows and can take up to another two weeks to fully complete. Best used over a Cellulose Sanding Sealer (brushing or aerosol) and can be overcoated with a wax for a softer tactile feel.

Add to cart Details Quick View
Liberon Wood Bleacher 500ml

£11.30

Wood Bleacher is ideal for removing dark stains caused by rust, alcohol, damp, ink, ring marks and fruit. It can also be used to lighten naturally dark wood or natural wood which has darkened through alkali stripping, staining or weathering. It does not harm the wood.

Add to cart Details Quick View
Mylands Clear Wax 400g

£11.34

Mylands wax polishes are manufactured from the finest natural ingredients including pure Beeswax and Carnuba wax. Mylands wax will help hide any surface scratches and produce a deep traditional sheen. On polished surfaces use sparingly and buff within a couple of minutes.

Add to cart Details Quick View
Tamboti Square

£11.35 – £19.95

The heartwood is light and dark chocolate brown. At 1010kg's/m3 the wood is hard, heavy, durable, close-grained and resistant to termites. When freshly worked it has a distinctive, sweetish smell.It sands and finishes well to a satin lustre. It is used in musical instruments, turning and carving.

Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
1/2″ Fixing Plate x 10

£11.50

pack of 10, 1/2" fixing plates.

Add to cart Details Quick View
Hampshire Sheen – microcrystalline wax 130g

£11.55

Quick drying Microcrystalline Wax is an ideal protective finish for many different projects and has many uses besides wood. Both Fingerprint and water resistant, Microcrystalline Wax is a hard wearing overcoat to wax and other finishes for an extra level of gloss and protection to your decorative wood items. Just a little of the product goes a very long way, so use it sparingly!

Add to cart Details Quick View
Robert Sorby Tip Holder

£11.56

Holds tips and cutters securely allowing easy sharpening of small and difficult to grasp attachments.

Add to cart Details Quick View
Leadwood square

£11.65 – £30.95

A dark brown to sometimes nearly black wood with straight to interlocking grain. Hard and heavy with good working qualities. Turns and finishes well and takes a good polish.

Select options This product has multiple variants. The options may be chosen on the product page Details Quick View
2″ Tapered Velcro Arbor (soft)

£11.85
2" Soft density tapered arbor for external and shallow internal curves Accepts all Velcro/loop backed abrasives including self or pre-cut squares and discs.

colour may vary
Add to cart Details Quick View