-
This extremely flexible dual-purpose adaptor can be used either as a stepped power tool adaptor or to create a bespoke dust extraction port. If the dust producing machine has no extraction port, this adaptor can be attached using the four screw holes in the flange, allowing a suitable hose to be connected to it. The adaptor can also be used to connect directly to a 2.5" diameter extraction system and the stepped profile be adjusted to suit the port of the power tool.
-
Out of stockWooden display box in maple and rosewood, in white carton for protection. Would suit up to 14mm (approx.) diameter pen.
-
Panga Panga is extraordinary in its rarity as it is only found, in commercially viable quantities, inMozambique. Its dark colours, with rich parenchyma bands brings a touch of the exotic to finished pieces. The heartwood is dark chocolate brown with paler broad bands. At 880kg/m3 the heartwood is extremely durable. It sands and finishes well.
-
The CrushGrind Diamond range are constructed using ceramic mechanisms. These unique mechanisms, which come complete with a 25 year guarantee, will grind salt, pepper, spices, herbs and much more. All mechanisms are adjustable with 14 settings to give an excellent range of grinds from coarse to fine.A great benefit of these mechanisms is that they are fully enclosed inside the grinding mill - There is no top pin protruding from the mill, as with traditional mechanisms and this allows for greater freedom of creativity in the design and turning of the mill.Specially designed integral ribs and catchers securely hold the mechanisms in place for the lifetime of the mill. Shafts can be cut to the exact length needed if necessary.
-
Hampshire Sheen Embellishing Wax are ideal for enhancing open grained decorative items from woods such as Oak or Ash or woods with added texture. They work brilliantly in combination with the Intrinsic Colour Collection and this selection available in nine colours are a great, easy to apply alternative to gilt creams. Supplied in 60g tins.
-
Out of stockHeartwood is a vivid red when freshly cut, toning down to a medium to dark purple-brown on exposure, often with fine black lines. Sapwood is wide and greyish-white. Straight to interlocked grain with course texture. Finishes very well, tends to be dusty.
-
This tapered quick connector will give a simple push fit onto most 100mm diameter dust extraction outlets. Ideal for moving an extractor between several machines with 100mm outlets. It can be moved from table saw to bandsaw to planer in seconds. The other end of the fitting has a threaded design which screws into the inside of our 100FLEX 100mm diameter hose. 100QC is for 100mm diameter hose only. Please note: The 100QC has a right handed thread and is therefore suitable for right handed hoses as supplied by Charnwood. Other hose manufacturers may use a left hand thread.
-
This is the same wax Chestnut use in the tinned version of Microcrystalline Wax but in a solid block form with no solvent. This means there’s no waiting around for it to dry before buffing it. Like the original version, this wax should be used very sparingly, a little goes a very long way and once applied it might even be necessary to spread it thinner using Safety Cloth (the texture of this makes it ideal for this purpose). The Microcrystalline Wax Stick is also perfect for use on the Buffing Wheel System, use it on Wheel C to buff up to a brilliant, hard wearing finish.
-
Woodturners stick wax is a mixture of beeswax and carnauba wax it is slightly softer than the Carnauba Wax Stick and therefore slightly easier to apply and there are no concerns about it marking softer woods. Applied over a sanding sealer, simply hold the stick against the revolving work and allow the heat generated to melt the wax onto the wood. Buff up straight away using Safety Cloth, using the cloth to ensure an even coating.
-
These compounds are designed to co-ordinate with the cloth used in the Buffing Wheels and Dome Buffs to give an exceptional cut and prepare the surface to a very smooth finish prior to using wax. Compound 1 -the brown one – (sometimes referred to as tripoli) is used with the ‘A’ Wheel/Dome to help smooth the applied finish. Avoid overloading the wheel/dome where possible to prevent a build up of the compound. If this happens it can be removed by either washing in soapy water or abrading the edge of the wheel with a coarse abrasive. Do not use on very open grained light coloured timber as the compound can get lodged in the grain and colour the piece. Compound 2 – the white one – (sometimes referred to as white diamond) acts as a cleanser to remove any traces of Compound 1 left on the surface (but not from the grain) and also has a very fine abrasive contained in it which smooths the work, leaving a semi-gloss finish and a superb foundation for the top coat of wax. Use Compound 2 sparingly, too much on the wheel will result in smears on the surface of your work which can be removed with buffing but this can be very time consuming and frustrating. It’s always best to apply a little and add more if needed.
-
This is a solid block of carnauba wax, popular with woodturners. It gives a bright gloss finish and is also very hard wearing, able to withstand a medium amount of handling without showing finger marks. Apply over a sanding sealer by holding it against your work at it revolves on the lathe. Do not press too much – the wax is very hard and can scratch softer woods – the idea is to generate enough heat for the wax to melt slightly and transfer onto the wood. (This is easier than it sounds!). Use sparingly, and use the polishing process (using safety cloth) to ensure the wax is spread evenly. Buffing will produce a high gloss finish.
-
Wax Filler Sticks are blended wax filler used to repair cracks, splits and small to medium-sized holes without sanding or having to strip the finish. Available in a wide range of intermixable wood colours, they can be applied without a heat source, are quick drying and have no shrinkage making them ideal for use on finished furniture and other articles.
-
Llewellyn Ryland Polyester Pigment are coloured liquid/paste mediums based on pigments dispersed within a solvent-free reactive unsaturated polyester resin. They are available in a wide range of colours varying in strength and consistency depending upon the particular colouring application. They have been developed to blend easily into resin systems. The range of colours is based upon pigments carefully selected for colour fastness, opacity, heat stability and having minimum effect upon the curing characteristics of the final system. The resin used with the Polyester Colour Paste is a specially developed solvent-free reactive polyester resin which chemically cross links with the moulding resin so that the colour is "locked in" once the system has cured. They can be used to colour most polyester resin based systems used within the composites or related industry. These Polyester Colour Pastes have excellent stability.
-
Pyrography features the decorative craft that has been practiced around the world for thousands of years. This ancient art involves burning intricate designs on objects made of wood, leather, cork, fabric, and even paper. From beginner basics and information on equipment and techniques to advanced ideas for personalizing anything from cutting boards to furniture, there’s something for everyone. Both men and women will enjoy making and receiving these 18 fun and interesting projects like door numbers, a letter rack, and a jewelry box.
-
Out of stockFeaturing a spiral twist, these plain end HSS blades can cut in any direction without the need to turn the workpiece. This is particularly useful for projects that are too big for the throat depth of the scroll saw. They also allow for pieces to be cut with the bevel running in the same direction all round. 0.8 mm wide, 0.34 mm thick, 40 TPI.
-
Out of stock24K Treble Clef Clip
-
Out of stock24K Medical Clip
-
Tack Cloths are coated with a special, sticky resin. The resin doesn’t transfer off the cloth but when you wipe it across a surface it picks up and dust and removes it, leaving behind a clean surface ready for finishing. This makes it ideal for use after your final sanding to make sure that all of the sawdust generated is removed and doesn’t affect your finishing. Tack Cloths are supplied in a sealed wrapper; once opened store them in an air-tight container to prevent them from drying out. Do not use Tack Cloth with the lathe running.
-
Made in the USA, these are the original and best quality Foam Brush. Manufactured using a special foam with a stiffener inside to make sure they keep their shape in use, and supplied with a solid wooden handle attached. Great for eliminating brush marks (no bristles = no brush marks) and there’s no danger of any stray bristles coming loose and spoiling your work. Priced to be semi-disposable they will normally wash out several times for re-use. Fantastic for applying acrylic finishes which have a tendency to froth up when applied by brush – the Foam Brush virtually eliminates this completely. Can also be used for painting, particularly gloss paints, seasoned users have been known to have a brush in each hand!