-
Out of stockA red/brown timber veined with darker red stripes. The wood is dense, with a straight to sometimes interlocking grain which when turned has a fine even texture and polishes to a high finish.
-
Out of stockCrowns heavy duty Scrapers 1 1/2" 38mm x 3/8" 10mm help keep vibration to a minimum.
-
Out of stock3/4 Inch Stem For Older Lathes
-
These Dispensing Nozzles are, in fact, almost indispensable! They fit onto any of Chestnuts' plastic bottles in the 250ml, 500ml and 1 ltr sizes, simply replacing the existing cap. Cut the tip off to the size you want and use the handy cover to reseal them when not in use. A useful by product of using these is that if you knock a bottle over the amount you lose through the small nozzle will be much less than without it. Just don’t forget to take the nozzle off the bottle before you throw it away so that you can re-use it! These nozzles are not child resistant, the correct closure should be replaced when the product is not in use.
-
NyWeb pads are a non-woven nylon webbing with an abrasive – either silicon carbide or aluminium oxide – embedded into them to give an exactly defined cut.
- The Green pads are 400 grit
- The Red pads are 600 grit
- The Orange pads are 1000 grit
- The White pads do not contain an abrasive and are thus technically non-abrasive, but the very texture of the pads gives them an incredibly fine – but immeasurable – cut.
-
Milliput Epoxy Putty, the two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process). Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C. Shelf Life: Recommended that Milliput is stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years. Available in six colours: Standard (Yellow/Grey), Terracotta, Silver Grey, Black, Superfine White and Turquoise Blue.
-
Safety Cloth is a thick, non-woven paper cloth. Designed to stay wet longer to assist the transfer of finishes to your chosen surface, it also tears very easily if it gets caught in revolving parts thus avoiding the danger of fingers being dragged into machinery. The texture of Safety Cloth ensures that a thin, even coat is applied and the thickness means that it retains it’s strength and the same piece can be used several times with the same finish. Safety Cloth is not a replacement for common sense and good safety practise.
-
Out of stockWild Mango is a stunning deep cream coloured wood with golden undertones that creates its own ambience. The heartwood has a colour yellow brown to nut brown with a subtle but attractive grain pattern. Weighing 800Kg's/m3 the hardwood durable and logs that have been lying on the forest floor for decades produce high quality sawn boards. It sands and finishes well. It is used for turning and carving.
-
The wood is a red brown which is faintly pink tinged, occasionally with a blackish streak. The texture is medium to fine and even. It weighs 975Kg/m3 with the SG at 12%. It sands and finishes well. It is a hard timber with an attractive grain but turns well and produces a good finish. Tool must be kept sharp.
-
Made in the USA, these are the original and best quality Foam Brush. Manufactured using a special foam with a stiffener inside to make sure they keep their shape in use, and supplied with a solid wooden handle attached. Great for eliminating brush marks (no bristles = no brush marks) and there’s no danger of any stray bristles coming loose and spoiling your work. Priced to be semi-disposable they will normally wash out several times for re-use. Fantastic for applying acrylic finishes which have a tendency to froth up when applied by brush – the Foam Brush virtually eliminates this completely. Can also be used for painting, particularly gloss paints, seasoned users have been known to have a brush in each hand!
-
Out of stockfor use with BDS150 for 6" x 4" Belt & Disc Sander
-
The wood is a red brown which is faintly pink tinged, occasionally with a blackish streak. The texture is medium to fine and even. It weighs 975Kg/m3 with the SG at 12%. It sands and finishes well. It is a hard timber with an attractive grain but turns well and produces a good finish. Tool must be kept sharp.
-
Panga Panga is extraordinary in its rarity as it is only found, in commercially viable quantities, inMozambique. Its dark colours, with rich parenchyma bands brings a touch of the exotic to finished pieces. The heartwood is dark chocolate brown with paler broad bands. At 880kg/m3 the heartwood is extremely durable. It sands and finishes well.
-
Wild Mango is a stunning deep cream coloured wood with golden undertones that creates its own ambience. The heartwood has a colour yellow brown to nut brown with a subtle but attractive grain pattern. Weighing 800Kg's/m3 the hardwood durable and logs that have been lying on the forest floor for decades produce high quality sawn boards. It sands and finishes well. It is used for turning and carving.
-
Out of stockAids in removing cured superglues from skin and work surfaces. Debonding agent for all super glues. Always test first. 1-oz bottle.
-
The finest of Steel Wool, very low crumble and virtually oil free to ensure there is no contamination of your work. Use it after sanding with abrasive sheets to give an ultra smooth surface, or to apply waxes to smooth the timber whilst applying a thin coat. Steel Wool burns very quickly and easily; keep it away from sources of combustion (i.e. sparks etc). Always use a knife or scissors to cut Steel Wool
-
These beautiful micaceous-based colours are for artists and crafters who wish to add a touch of glamour or glitter to a piece, such as the translucent glow of an angel's wings, a butterfly, a fish or the brilliant iridescent shimmer on a mallard drake's neck. Simply mix the iridescent colours directly into your paints or apply after decorating to highlight specific areas. The choice is yours. For best use when using the Iridescent paints in an Airbrush, looks well on an ebonised background.