-
Metal holders require a hole approximately 42mm diameter x 17mm deep. The glass holder requires a hole approximately 48 mm dia x 26mm deep . Available in a glass, brass, copper and polished steel finish. -
Sheffield stainless steel stamped cheese knife : large blade length 110mm, overall length 150mm including tang. small blade length 75mm, overall length 107mm including tang. Simply add a wooden handle. -
Gold finish candle holder cup. 30mm deep with 10mm mounting hole in base. External diameter top, 24mm tapering to 22mm at bottom. Internal diameter top, 22mm tapering to 20mm at bottom. 30mm diameter rim at top. -
Wooden Pen blanks measure 5" or 6" long x 3/4" x 3/4". Available in a variety of woods. -
Perforated design which allows the dust to escape without clogging. -
Hand cast and hand painted 3 dimensional resin pot pourri/ trinket box lid. Approx 80 - 85mm diameter. -
2" wide cloth backed abrasive available in six grits, 80G, 120G, 180G, 240G, 320G & 400G. -
90mm diameter tile. -
1/2" brass safety switched lamp holder. (Holder switches off automatically when the bulb is removed.) -
73mm dish with 10mm high spike, the spike will hold a larger candle in place. This dish can be attached to a turned wooden base. -
Maple pen box with rosewood ends, in a white carton for protection. -
Fine finish starts with good preparation! Use these mildly abrasive pads after sanding for a final smoothing process to give a near-perfect surface prior to applying any finish. Very long lasting, these pads are also very flexible and do not crumble, thus avoiding contamination of your work. -
This hardwearing material is a great choice for profiling and re-profiling damaged tools. The heavier 60 grit option is an efficient choice for removing plenty of material, while the finer 120 grit will provide a satisfying finish. Great longevity and highly practical. -
Turn your own unique design handle. Bottle stopper with silicone rubber ribbed band. 70mm long x 25mm diameter tapering to a point. Fixing thread 15mm long (approx.) x 8mm diameter (approx.) -
2" velcro (hook and loop ) backed abrasive sanding discs. Designed to be used in a power drill but can also be used in the Robert Sorby Sandmaster. Available in 60G, 80G, 120G, 180G, 240G, 320G & 400G. -
Velcro backed 6" (150mm) wide rolls x 1 metre in 9 grits, 80G, 120G, 180G, 240G, 320G, 400G, 600G, 800G & 1200G -
Out of stock
Basswood is an ideal wood for woodcarvers and whittling. Its soft, fine, even texture makes it easy to work with, while its pale inconspicuous colour doesn't distract from the carved patterns of the finished product. It can take stain and polishes without difficulty. -
Woodturning smock with velcro closures on the cuffs and collar, two large patch pockets on the rear, pen/pencil pocket conveniently provided on the left upper sleeve. Colour: bottle green. Material: 65% polyester, 35% cotton. -
130mm white dial with Arabic or Roman numerals, brass diamond turned bezel ring and domed glass clock insert. Requires a hole approximately 83-85mm diameter x 25mm deep to insert mechanism into. -
Perforated design which allows the dust to escape without clogging. mixed pack of 15, 3 of each of the following 5 grits, 120G, 180G, 240G, 320G 400G, 70mm x 125mm.
-
Roman Plastic numerals in gold. -
Pewter pot pourri lid approx 80mm diameter. -
Sheffield stainless steel stamped pie knife blade : large = length 145mm, overall length 185mm including tang. small = length 75mm, overall length 117mm including tang. -
This amazing product is a cut and polish paste containing Tripoli powder, an ultra-fine abrasive. The polish is designed to be used in conjunction with Shellawax Cream and liquid formulations or as a finish in its own right on plastics (such as acrylic, resin-impregnated burr, crushed velvet, artificial ivory and similar products used for pen bodies). It can also be used after French polishing and restorers will find it useful to cut and revive previously polished surfaces. Although designed to be used directly on raw timber, bear in mind that EEE is not a finish in itself and the polished surface will need protecting by the use of some other product (such as Shellawax). EEE-Ultra Shine can be used over many other finishes such as oils and most types of varnish, enhancing the surface and giving it a smoothness and lustre with an ease that you would never have thought possible.
-
5" x 3/4" x 3/4" colourwood pen blank -
160mm white dial with Arabic or Roman numerals, brass diamond turned bezel ring and domed glass clock insert. Requires a hole approximately 83-85mm diameter x 25mm deep to insert mechanism into. -
Quartz Clock Movement, in 4 sizes, 11mm (short), 16mm (medium), 21mm (long) and 26mm (extra long) shaft length. The body of the clock is approx. 57mm square x approx. 18mm deep. -
Out of stock
Basswood is an ideal wood for woodcarvers and whittling. Its soft, fine, even texture makes it easy to work with, while its pale inconspicuous colour doesn't distract from the carved patterns of the finished product. It can take stain and polishes without difficulty.
-
Wooden display box in maple and rosewood, in white carton for protection. Would suit up to 14mm (approx.) diameter pen. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
A simple kit comprising a brass tube with a decorative finial at one end and a means of attachment for hanging at the other. They are a great way of using up your offcuts to produce some unusual designs for seasonal tree decorations at Christmas. The brass tube fits on a7mm pen mandrel. -
Good finishing requires a good foundation, and Cellulose Sanding Sealer is probably the best way of providing one. Compatible with everything in the Chestnut Products range that benefits from the use of a sanding sealer (which is pretty much everything apart from oil finishes!) it is superbly universal.
The purpose of a sanding sealer is manifold.
- It seals the open pores of the timber prior to the application of the next coat, meaning that more of it stays on the surface and less of the finish is needed. Not only does this make it economical, when finishing the thinner the applied coat the less likely it is to get damaged, so a sanding sealer will help the top coats be more resilient.
- Sanding Sealers also bind the loose fibres of the timber together giving a more solid foundation for the next coat, which helps make sure the final finish is able to adhere properly and thus be more durable.
- They also include a sanding agent which acts as a lubricant to make the sanding process easier – the sanding agent also stands slightly proud of the surface of the sealer and it is this that is denibbed – the sealer itself should still be intact after sanding.
-
Super thin penetrating formula, bonds in 1 - 5 seconds. -
Letter knives or paper knives make a useful desktop tool, simply add a wooden or an acrylic handle to make a useful gift. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Gold metal bezel on a plastic case, fits a case hole of 58 to 62mm diameter x 18mm deep with spring fitting. Bezel diameter 100mm. Takes an LR1 battery. -
Mopane is a very heavy, dense timber. Dark red/brown in colour generally streaked with black. Narrow straw coloured sapwood. Turns well with care and polishes to a lustrous finish. -
Wire type hose clamp for securing hose to machinery or fittings. For use with matching diameter hose. -
The outer chapter ring and decorative hands display the hours and minutes. Just above the figure six, a second dial ticks off the seconds. A quartz movement drives the exposed inner workings making a very attractive clock. The skeleton clock comes fully assembled and ready to mount in a frame or base of your making. -
150mm diameter tile. -
A one-application woodturners friction polish that really does work and is ideal for use on smaller spindle work such as pens and similar objects up to around 10 cm (4") diameter. This exceptional polish is made using a specially formulated hard shellac as a base to give a harder, more durable finish, giving greater resistance to marks and blemishes from water, alcohol and heat. Normally applied directly onto bare timber (though it can be used over most oils too – but test on scrap first) this polish dries almost instantly yet goes on hardening for up to three weeks resulting in a truly durable finish which far exceeds others on the market today. Once fully cured the finish is food-safe and non-toxic. -
Wooden display case in maple for 7mm pen, in white carton for protection. -
Gold or Chrome plated magnifying glass with glue on ferrule. 65mm diameter frame with 3 magnification. (inner dimensions of ferrule: 17mm x 20mm depth). -
Woodturners stick wax is a mixture of beeswax and carnauba wax it is slightly softer than the Carnauba Wax Stick and therefore slightly easier to apply and there are no concerns about it marking softer woods. Applied over a sanding sealer, simply hold the stick against the revolving work and allow the heat generated to melt the wax onto the wood. Buff up straight away using Safety Cloth, using the cloth to ensure an even coating. -
metal hands plus matching black second hand -
1 metre 3 core gold flex (to order more than 1 metre change quantity column to metres required and press update basket) -
Gold colour metal rim on plastic case with metal spring fittings. The case fits a hole 58mm - 62mm diameter x 18mm deep. Bezel diameter 65mm. -
Sheffield stainless steel stamped bread knife blade, length 200mm, overall length 245mm including tang. Simply add wooden handle. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
The CrushGrind Diamond range are constructed using ceramic mechanisms. These unique mechanisms, which come complete with a 25 year guarantee, will grind salt, pepper, spices, herbs and much more. All mechanisms are adjustable with 14 settings to give an excellent range of grinds from coarse to fine.A great benefit of these mechanisms is that they are fully enclosed inside the grinding mill - There is no top pin protruding from the mill, as with traditional mechanisms and this allows for greater freedom of creativity in the design and turning of the mill.Specially designed integral ribs and catchers securely hold the mechanisms in place for the lifetime of the mill. Shafts can be cut to the exact length needed if necessary. -
Wood Bleacher is ideal for removing dark stains caused by rust, alcohol, damp, ink, ring marks and fruit. It can also be used to lighten naturally dark wood or natural wood which has darkened through alkali stripping, staining or weathering. It does not harm the wood. -
Long series sawtooth Forstner cutter Long series forstner bit (inch), sawtooth pattern, particularly suited for cutting down the grain. Long series - all sizes are a minimum of 150mm long, will produce over-lapping holes, resharpenable. -
Deep orange-brown timber with broad medullary rays creating a flame pattern on quarter cut faces or numerous spots on flat sawn surfaces. Hard and heavy with a slightly coarse texture. -
Plastic Bracket for Wall Mounting Hose. For use with 100mm diameter hose, or smaller, the wall hanging bracket will allow you to fix a hose line to the wall or ceiling. Comes complete with fixing screws and raw plugs. -
Pack of 10, cover to hide the screws holding the fixing plate to the wood. -
Gift Card available to use against any product or course. -
Shellawax cream is a woodturners friction and buffing polish. Sharing many of the characteristics of Shellawax liquid, Shellawax Cream is specially formulated for use on larger turned projects where it would normally be impossible to get a first class finish using a conventional friction polish and on stand-alone articles such as carvings. As with Shellawax, only one application is required to completely finish the work. Made using a specially formulated hard shellac as a base, this excellent product gives a hard, durable finish, with impressive resistance to marks and blemishes from water, alcohol and heat. The cream formulation retards the frictional drying characteristic of friction polishes, making it suitable for use on larger lathe-turned items such as bowls and platters. Being a cream, this product is easily controlled in application and is very economical in use. Shellawax Cream is non-toxic. -
A smart looking, traditional black velvet box with white satin lining on lid. -
Brass colour metal candle cups, fits a 23mm hole (approx.), with a 20 mm overall height, pack of 10. -
Tin colour metal candle cups, fits a 23mm hole (approx.), with a 20 mm overall height, pack of 10. -
Out of stock
Ash is a cream to olive brown timber with a darker heart which comes from larger logs. Has a straight to wavy grain with a course texture. Machines and turns well and takes an excellent finish. -
Stainless steel pizza cutter. Turn a handle to create a useful pizza cutter, cutter diameter 100mm, overall length wheel and tang 150mm . -
Record Power's powerful work lamp is a perfect addition to any workshop. The long flexible neck allows it to be positioned to illuminate even the most hard-to-reach areas and get rid of troublesome shadows, giving a clear view of the work in progress. To further increase the lamp’s flexibility, a sliding collar on the lamp head allows either a spotlight or floodlight beam to be created. The strong magnetic base and magnetic side clip mean the light can be secured virtually anywhere on a machine. Powered by either standard AA batteries or a USB rechargeable lithium battery, this lamp gives hours of uninterrupted use and is ideal for a wide variety of machines such as scroll saws, bandsaws, sharpening machines, lathes and many more.Includes:• Magnetic base• Magnetic side clip• AA and Lithium battery holders• Micro USB-A cable -
Record SC3 Chuck Package is lighter and more compact than the SC4, making it ideal for use on any lathe, particularly small to medium sized machines and is still compatible with the full jaw range. The compact design reduces load on the lathe spindles and bearings and gives good access to smaller work pieces. The large jaw slides offer unrivalled strength and holding power that cannot be found in other chucks of this size.Supplied complete with the deep wood screw, 50 mm standard jaws and 2” faceplate this package offers unrivalled value. -
Gift Card available to use against any product or course. -
1/2" x 7/16" wood pillar nipples
-
A dark brown to sometimes nearly black wood with straight to interlocking grain. Hard and heavy with good working qualities. Turns and finishes well and takes a good polish. -
Metal bezel on a plastic case, fits a case hole of 58 to 62mm diameter x 18mm deep with spring fitting. Bezel diameter 85mm. Takes an LR1 battery . -
Heartwood is light golden-yellow with streaks and veining being dark brown to almost black. Sapwood is wide and grey-white with darker markings. Interlocked or wavy grain with course texture. -
Wooden display box in maple for 7mm pens, in white carton for protection. -
Milliput Epoxy Putty, the two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process). Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C. Shelf Life: Recommended that Milliput is stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years. Available in six colours: Standard (Yellow/Grey), Terracotta, Silver Grey, Black, Superfine White and Turquoise Blue. -
100mm x 25mm -
Out of stock
24K Treble Clef Clip -
Blanks are supplied in a square block form, 150mm x 20mm x 20mm. Each blank is unique and pictures indicate pattern/colour, purchased items are subject to slight variations. -
African blackwood clarinet bell (reject). Dark purple-brown with black streaks, giving an almost black appearance. Generally straight grained with a fine even texture. Finishes exceptionally well. -
Made from moulded latex rubber. Washable and reusable. 33mm long, 27mm diameter top to 20mm bottom with a 12mm hole. Add wood or acrylic handle. -
Flexible PU (Polyurethane) durable hose with transparent wall and copper coated, high tensile steel wire. Ideal for wood dust and chip extraction. Available by the metre in different diameters. Manufactured in Great Britain! -
Chuck Insert to fit the Record Power SC1 Mini Chuck and SC4 Professional Geared Scroll Chuck only. -
If you’re looking for a clear finish that is tough, hardwearing and gives a satin lustre yet is still very easy to apply, even on larger areas, you’re in the right place.
Hard Wax Oil is a particular blend of tough oils combined with special waxes which dries to an exceptionally resilient finish. Ideal for anything that is going to be subjected to water splashes or a lot of handling this oil may not be indestructible but it will stand up to a lot of abuse.
It retains the ease of application typical of an oil and it stays wet long enough to get a smooth, even finish – even on large areas – but is touch dry and tack free in about 20 minutes, and better yet is ready for a second coat after about four hours (in normal conditions).
Hard Wax Oil will build to a bright gloss finish after 2-3 coats. Rub down lightly between coats with a fine abrasive. Once hard dry (allow at least 24 hours) it can be brought to an even brighter shine using either the buffing wheel system or burnishing cream.
For a not-quite-so-bright finish use a mild abrasive to reduce the gloss. For best results lubricate the abrasive with microcrystalline wax to retain the toughness of the oil.
-
Wild Mango is a stunning deep cream coloured wood with golden undertones that creates its own ambience. The heartwood has a colour yellow brown to nut brown with a subtle but attractive grain pattern. Weighing 800Kg's/m3 the hardwood durable and logs that have been lying on the forest floor for decades produce high quality sawn boards. It sands and finishes well. It is used for turning and carving. -
Gift Card available to use against any product or course. -
Gold colour box hinge with bow clasp suitable to make a lid for a cylindrical / round wooden box. Fits approximately 51mm spigot. -
This is a solid block of carnauba wax, popular with woodturners. It gives a bright gloss finish and is also very hard wearing, able to withstand a medium amount of handling without showing finger marks. Apply over a sanding sealer by holding it against your work at it revolves on the lathe. Do not press too much – the wax is very hard and can scratch softer woods – the idea is to generate enough heat for the wax to melt slightly and transfer onto the wood. (This is easier than it sounds!). Use sparingly, and use the polishing process (using safety cloth) to ensure the wax is spread evenly. Buffing will produce a high gloss finish. -
Woodturners drill chuck, supplied with chuck key. -
These beautiful micaceous-based colours are for artists and crafters who wish to add a touch of glamour or glitter to a piece, such as the translucent glow of an angel's wings, a butterfly, a fish or the brilliant iridescent shimmer on a mallard drake's neck. Simply mix the iridescent colours directly into your paints or apply after decorating to highlight specific areas. The choice is yours. For best use when using the Iridescent paints in an Airbrush, looks well on an ebonised background. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
An exciting and vibrant set of colours for staining wood, Spirit Stains are methanol based to make them quick drying and because of this they also will not raise the grain of the timber they are applied to. The pigments used to make this stains are of the highest quality and all score the top ratings of 7s and 8s in the Blue Wool Scale, the measuring system used to rate fade resistance. This means you can use them with confidence knowing that the colour you apply will still be the same many years later. Spirit Stains are fully inter-mixable so you can produce virtually any colour you can think of, giving you full opportunity to be as creative as you wish. The colours will also mix after application so you can blend from one colour to another for fantastic ‘flare’ effects. Spirit Stain White is designed primarily as a mixer to create pastel shades when mixed with other Spirit Stain colours. It can be used to stain timber but as it is a translucent stain this can have a limited effect depending on the base colour of the timber used. Should you want a more subtle colour you can dilute the stains with Spirit Thinners for a delicate wash effect. -
As the name suggests, the High Gloss variation brings a higher shine to your decorative woodwork . It is tough, with an additional 'Pow' of shine that suits some lathe projects. Contains a high quantity of carnauba and microcrystalline waxes. Shiny, tough and exceptionally long lasting. Food and toy safe, too. Supplied in 130g tins. -
This pure cellulose solvent is a high quality dilutant for our cellulose based products, such as Cellulose Sanding Sealer and Melamine Lacquer. Thinning these products can help to make them easier to apply, especially over larger areas as it helps them flow out. Cellulose Thinners is also useful for cleaning any spills you may have in the workshop and is strong enough to help clean most things, taking care to ensure that it does not attack It can also be used to thin Spirit Stain to give a delicate wash effects, although spirit thinners is the better option for this.
