-
Record Power Bowl Gouges feature an improved flute profile, designed to help clear shavings quickly for more effective and faster cutting. -
Record Power Parting Tools mainly used for parting the finished workpiece from the waste wood. With the correct technique they can also be used for creating beads and patterns - a truly useful and essential tool. -
Record Power Skew Chisels probably the most versatile tool for working between centres - they can give a silky smooth finish and may also be used for creating beads, coves and other decorative elements. -
Record Power Spindle Gouges these are ideal general-purpose spindle tools, ideal for producing beads, coves and sweeping profiles across a wide range of projects. -
Record Power Spindle Roughing Gouges designed for use between lathe centres on parallel grain, the deep and wide flutes of these gouges remove material with speed. Ideal for roughing out spindle blanks but they can also be useful for some finer work. -
Milliput Epoxy Putty, the two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process). Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C. Shelf Life: Recommended that Milliput is stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years. Available in six colours: Standard (Yellow/Grey), Terracotta, Silver Grey, Black, Superfine White and Turquoise Blue. -
Out of stock
While this resin has been manufactured to resist scratching and resistance to marking from heat sources we must stress this resin will still mark if sharp items are moved across the surface or hot items are placed on the surface.
As with all casting products, we stress that customers should purchase a small amount to perform initial tests to ensure suitability for their project and requirements.
Pigmentation Epoxy pigments are the recommended system to colour this resin however the polyester range of pigments will also work. Please read the Technical and Safety Data sheets prior to use. We recommend small scale testing to ensure compatibility before using at full scale. Cold Weather Notice Cooler temperatures in the UK and Ireland around mid-autumn to mid spring are not ideal conditions for water clear epoxy systems, this can increase the chances of crystallisation in the resin (this can occur at room temperature depending on circumstances, it is however much less common). Appearance can differ depending on the degree of crystallisation, from small lumps sitting on the surface to a hazy/milky white appearance, extreme cases the contents may completely solidify. Crystallisation occurs due to a phase change from liquid or solid similar to that of water turning to ice, fortunately it is easily reversed by warming the epoxy component to 60°c. Ensure any crystals are completely removed as remaining crystals can act as a seed causing the crystals to form again quite quickly. Lab results show the heating cycle to remove crystals can be repeated on multiple occasions before beginning to suffer from any losses in resin properties. We recommend keeping the resin system at a good room temperature at all times where possible, ensure to clean the lids and bottle necks of containers with isopropyl alcohol / acetone allowing the solvent to evaporate before replacing the lid.Product Data Units Mix Mix Ratio Weight 100 : 50 Hardness ShoreD 80 - 85 Viscosity (25°C) mPa.s 600 - 900 Density (25°C) g/cm3 1.09 – 1.13 Pot life (200g, 25°C) Mins 25 - 30 Cure Time (200g, 25°C) Hours 24 Full Cure (25°C) Days 7 Recommended Casting Thickness mm 1 - 5 -
Llewellyn Ryland Polyester Pigment are coloured liquid/paste mediums based on pigments dispersed within a solvent-free reactive unsaturated polyester resin. They are available in a wide range of colours varying in strength and consistency depending upon the particular colouring application. They have been developed to blend easily into resin systems. The range of colours is based upon pigments carefully selected for colour fastness, opacity, heat stability and having minimum effect upon the curing characteristics of the final system. The resin used with the Polyester Colour Paste is a specially developed solvent-free reactive polyester resin which chemically cross links with the moulding resin so that the colour is "locked in" once the system has cured. They can be used to colour most polyester resin based systems used within the composites or related industry. These Polyester Colour Pastes have excellent stability. -
Features:- Fine control of heat and precise handling of the burning head, variable heat, up to 1100º C.
- The pen (for handpiece) has a cool running and lightweight handle which remains comfortable even after many hours of use.
- Writes quickly and as fluently as a fountain pen.
- Cost effective replacement points.
- The ability to shape your own points from specialist wire with the supplied fine wire, perfect for fine detailed burning. Thicker wire is available, ideal for enhancing bird or stick carving.
-
- Designed for use with the Peter Child Pyrography machine: two pen flexibility at the flick of a switch.
-
- Make points to your shape and design using wire cutters and pliers. One reel can make in excess of 150 points. Hammered flat, they can be used as a blade for burning feathers, grass or fur, or file the wire to a needle point for minute detail.
-
Made from Nickel Chromium wire and with normal use will last many years. -
The SC1 and SC2 are the first mini-chucks on the market to offer woodturners a premium-quality solution for those who regularly turn small, intricate items - bringing the world-renowned quality of the SC3 and SC4 to the mini-chuck market. The SC2 is a direct-thread chuck and features a larger diameter body than the SC1, at 63.5 mm (2 1/2”), giving larger holding capacities than the SC1. -
The SC1 and SC2 are the first mini-chucks on the market to offer woodturners a premium-quality solution for those who regularly turn small, intricate items - bringing the world-renowned quality of the SC3 and SC4 to the mini-chuck market. The SC1 works in conjunction with a separately available insert, which means it can be used across a wide variety of lathes with different thread sizes, with a simple change of insert. It also makes a perfect partner to the SC4 chuck, as the inserts are a universal fit between both chucks. It also has a very compact 53.5 mm (2”) diameter body - giving easier access around the workpiece making it ideal for the turning of very small items. Insert must be bought separately. -
Liberon Finishing Oil is a blend of high quality oils for use on all interior wood and turned woodwork. Used to nourish and enhance the colour of the wood, it is suitable for use on kitchen tables and bathroom furniture, and can also be applied to cork, stone and terracotta. Water, heat, alcohol and food acid resistant, it gives a matt, satin or gloss finish depending upon the number of coats applied. Ideal for surfaces requiring a hard wearing and water-resistant finishes.
-
Liberon Quick Drying Tung Oil is a high quality natural oil for protecting interior and exterior wood. It provides a hard-wearing finish, and is ideal for surfaces such as tables and furniture. A quicker drying version of Liberon Pure Tung Oil, each coat dries in approximately four hours, and is highly resistant to water, alcohol and food acids. Being a penetrating oil it allows the wood to age gracefully and develop a natural patina. It provides a long-lasting matt finish. -
Mylands Blonde Dewaxed Shellac Flakes are used to produce a transparent, brown-coloured French Polish which is often used in antique restoration or the bespoke production of furniture. Easy to use, it is ideal for use on lighter coloured woods. -
2.5 metres of flexible hose for use with 2.5" diameter systems. -
New generation P3 R half mask, with low profile ergonomic design.- Offers less breathing resistance.
- Less clogging pressure and inward leakage.
- Approval P3 (R) APF20 x WEL
- Protects the user against airborne particles, oil aerosols, mist, welds and fumes.
- Twin HEPAC* pleat encapsulated design filter provides 99.99% filtration of airborne particles and aerosols at 0.3 micron and above.
- Exhalation valve on bottom of face piece, ensuring no exhalation fumes steam or fog of any glasses/visors.
- Protective grill covers 100% of filter surface.
- Grill protects filter from moisture and particulates, ensuring it performs better in clogging pressure and filtration efficiency.
- Unique integral sample port and plug allow non-destructive face fitting.
- Large non-return valve.
- Single piece head and neck strap with quick release.
- Manufactured from high-grade materials, odour free, non-allergenic. TPE mask body is latex and silicone free.
- Conforms to half mask standard BS EN 140.
- Respiratory protection to BS EN143 P3R.
- *High Efficiency Particulate Air Composite.
- Protection against airborne Coronavirus
-
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Record Sabre-250 10" Bandsaw, by taking the most relevant features from the existing SABRE series and applying them to the BS250, Record believe they have produced the best benchtop bandsaw available on the market below £400 / €500. In addition, the capacities, power and performance upgrades, combined with the unique SABRE features now found on this machine, make it a real contender in the general purpose floor-standing bandsaw category when combined with the BS250-AW stand and wheel kit. In this configuration it has quality and features well ahead of many of the lower cost floor-standing machines available in the market. The end result is a premium-quality, affordable bandsaw which retains the compact size of the BS250 while offering improved capacities, usability, accuracy and performance.
-
Sale!
The Record 8" Buffing Machine is the ideal solution for buffing and polishing woods as well as some metals and can be used in conjunction with pastes and compounds on a wide range of surfaces. It features a heavy-duty cast iron base which can be bolted to a bench and rubber feet to reduce vibration, making for smooth and stable running. The machine is supplied with two high-quality 8” (200 mm) diameter fine buffing wheels to ensure an excellent finish is achieved. -
The BM16 is a compact bench mounted morticer, introducing new levels of accuracy, ease of use and industrial features at an affordable price. The table is finely ground cast iron and moves smoothly and effortlessly front to back and side to side on machined dovetail slides. To ensure unsurpassed accuracy, the slides are fully adjustable using the easily accessible gib strips. An important feature of the table is the heavy and solid clamp, the likes of which are usually only seen on more industrial machines, which holds workpieces extremely securely, ensuring no movement during operation. The clamp is also repositionable, allowing a wide range of timber sizes to be accommodated. Movement of the chisel is similarly smooth and accurate, with a gas spring and dovetail slides, which feature adjustable gib strips, allowing cuts to be made with ease and precision. To further increase accuracy and speed of use, the BM16 also features sideways movement stops as well as vertical movement stops. These stops allow the depth and width of mortices to be set in order to achieve consistent results again and again. -
Out of stock
This package contains all the sharpening jigs needed for woodturning tools and offers excellent value for money. Contains: WG250/A Gouge Jig WG250/B Short Tool Jig WG250/I Tool Rest Jig WG250/N Profiled Leather Honing Wheel
-
Sturdy floor stand for the BDS250 Belt & Disc Sander. -
Pedal wheel kit for the BDS250 Belt & Disc Sander. Ideal for moving the machine around the workshop. -
for use with BDS150 for 6" x 4" Belt & Disc Sander -
The DS300 is a superbly built and heavy duty disc sander; a real workhorse that will provide years of reliable service in the workshop. Featuring a cast iron body, disc and table, this machine is more than capable of withstanding heavy sanding tasks. The powerful motor provides plenty of power and torque to easily handle large sections of timber and the dynamically balanced disc ensures smooth operation. This machine is in a different league to other disc sanders. When seen in action, the build quality and performance speak for themselves. -
The Record Power RSBG8 Bench Grinder has a long-established reputation for robustness and reliability, making it the perfect choice for the home workshop. This new and upgraded machine has an industrial-inspired design with a heavy-duty motor and offers improved power, stability and performance. It features fully adjustable tool rests with solid locking mechanisms to give optimum support. The cast iron base and sturdy body reduce vibration to give the smooth operation that is essential for successful and accurate sharpening. Rubber feet also dampen vibration whilst ensuring the grinder does not move during use. The wide body of the machine further increases stability and minimises the load on the bearings for increased life. The 40 mm white stone is ideal for giving a fine finish, particularly to HSS turning tools, while the more coarse grey stone is perfect for rougher grinding and shaping. In addition, the spark guard of the white wheel features a magnifying lens to aid fine sharpening. The build quality and reliability of this grinder is significantly higher than some of the more common and cheaper machines which generally have lower powered motors and are substantially lighter. Record Power grinders are designed to give many years of service and replacement stones are readily available should the original ones become worn out, a sure sign of the robustness of these machines.
-
The cast iron outrigger for the Coronet Envoy and Coronet Regent allows for the full capacity of the lathe to be used when turning bowls with the head swivelled.
