-
Out of stock
Crown Hand Tools Miniature Spiralling system, complete with a 17 and a 27 tooth wheel. -
Its small scale makes it ideal for smaller hollow forms.
-
- ½" Flat surface allows for aggressive hollowing
-
- Swivel clamp allows under cutting
-
- One curved tip (RS111C) for flowing shapes
-
- A second pointed tip (RS112C) for square shapes
-
- Teardrop scraper cutter acts as a round, half round and square scraper all in one
- Full instructions included
-
-
Related Products: These cutters are designed for use with the following tools: Medium tear-drop scraper (RS200C) to suit Multi-tip Hollowing System (RS200KT, RS200) Large tear-drop scraper(RS213C) to suit RS2000 Deep Hollowing System The Robert Sorby medium tear drop cutter, like its big brother (Large Teardrop RS213C) provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports traditional scraping and shear scraping techniques. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the 472 cutter holder to reshape the profile on the Robert Sorby ProEdge or on a grinding wheel. -
Out of stock
The slim blade allows for a very fine parted section to be achieved. This is especially useful when grain match after parting is required. e.g. parting a lid from its box. The blade is 1¼" deep giving strength to such a thin section which eliminates flex and vibration. -
Related Products: This cutter is designed for use with the following tools: Midi Multi-tip Hollowing System (RS100KT, RS100) RS2000 Deep Hollowing System The Robert Sorby small tear drop cutter provides a multi-facetted, highly efficient cutting edge. The shape of the cutter effectively converts the tool into a round, half-round or square scraper suitable for use on the inside or outside of small bowls, platters and hollow forms. Use the straight edge on outside curves and the rounded shapes for internal curved shapes. A great all rounder that supports traditional scraping and shear scraping techniques. Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. -
Sharpening: Use a diamond file or honing stone flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Perfect for the smaller piece. Related Products: This cutter is designed for use with the following tools:-
- Midi Multi-tip Hollowing Tool (RS100KT and RS100)
-
-
M42 Razor Edge 3/16" Diamond Parting Tool combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
The Sovereign Extension is a useful addition to the range of accessories. Custom-made during the development of the new Sovereign sets. This 4" extension adds length to any Sovereign handle. NOTE: a threaded coupler is required. -
A must in the tool kit of every bowl turner. These tools are ideal for making bowls. They can produce either massive profiling cuts or delicate finishing cuts as necessary. -
Out of stock
This 18" tool can produce either massive profiling cuts or delicate finishing cuts as necessary, -
These are detailing tools used on between-centre work, where the grain is running parallel to the lathe bed. Spindle gouges are used to create coves, beads and other profiles on goblets, vases, bed posts, candle sticks and other spindle projects. -
Used on bowls and platters to create smooth flowing curves.
-
Providing choice and flexibility in one easy to handle tool. The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system. Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way they work. Designed to quickly and easily complete many popular projects, the TurnMaster has been a huge success with both novices and experienced turners. Its unprecedented collection of parts and cutters making it the most versatile and value added single tool concept on the market today. -
Providing choice and flexibility in one easy to handle tool. The Robert Sorby TurnMaster is the first tool in the world to combine three cutting edge technologies in one flexible system. Now woodturners can choose between tungsten carbide, titanium nitride and high speed steel cutters and decide what material best suits the way they work. Designed to quickly and easily complete many popular projects, the TurnMaster has been a huge success with both novices and experienced turners. Its unprecedented collection of parts and cutters making it the most versatile and value added single tool concept on the market today. -
The round is a general purpose cutter for the rapid removal of material inside and outside bowls and hollow forms. It works equally efficiently on spindle work. The detail point offers an excellent choice for roughing down square stock to round and for creating fine detail, while the square is useful for generating square shoulders on tenons. It is also excellent for spindle work. Both the square and round cutters deliver an extremely fine finish that requires little or no sanding when the TurnMaster is switched to shear scraping mode. Manufactured with the highest quality micro grade tungsten carbide these cutters will provide incredible durability and endurance. Sharpening: Use a diamond file or diamond plate flat across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a diamond belt or on a grinding wheel using diamond or other high density abrasive material. Sharpens to: 0.7 microns Hardness: 90 RC Material: micro grade tungsten carbide Related Products: These cutters are designed specifically for the TurnMaster -
Sharpening: Use a diamond file or honing stone across the top face. To gain best results and increase the longevity of the cutter this simple procedure should be done little and often. Use the TurnMaster cutter holder to reshape the profile on the Robert Sorby ProEdge using a zirconium or ceramic belt or on a grinding wheel using a standard abrasive material. Sharpens to: 0.2 -0.4 microns Hardness: 62 RC Material: M2 HSS Related Products: These cutters are designed specifically for the TurnMaster -
The SABRE range of bandsaws are the next evolutionary step from the highly regarded and market-leading Record Power premium bandsaws. They have built on the success of their premium range by introducing some fantastic new features to the SABRE-350 to make a bandsaw that is more effective, accurate and easier to use than any other machine in its class. Featuring an 1100 W output (1 1/2 horsepower) motor coupled with the heavy-duty cast iron band wheels, the SABRE-350 packs a real punch and can handle cuts to its full capacity with ease. The two speeds, which are slightly faster than comparable machines, make it ideal for cutting non-ferrous metals as well as wood. The cam-action fence adjustment, spring-loaded guides, cam-action blade tension release and double-sided fence mount make this a machine that is so easy to setup and use it leaves you free to concentrate fully on the project at hand.
-
Skip tooth pattern to suit BS400. Also fits Axminster JBS180 & Jet JWBS18 -
No more ground finger ends, just bolt on your turnmaster tips to aid with sharpening. -
Holds tips and cutters securely allowing easy sharpening of small and difficult to grasp attachments. -
Replacement for the main filter on Record Power high filtration dust extractors. -
With 28 LED bulbs mains powered, Charnwood's magnetic base light is ideal for any situation where better lighting is required. The flexible arm is 370mm long and is fixed onto a magnetic base that can be turned on and off allowing the LED light to be securely attached to any steel or cast iron base. With 28 LED lights it produces better light than many with the added advantage of emitting very little heat. There is a seperate on / off switch for the LED light and it runs off a standard 240v, 13amp socket and comes complete with a 1.2m cable. Ideal for use with;- Bandsaws
- Lathes
- Pillar drills
- Scroll Saws
- Underpinners
Specification
Number of LEDs 28 Brightness 180 Lumens Shaft Length 370mm Weight 1.4kg Rating Trade Warranty 1 Year -
Faceplates are the ideal tool for mounting larger or heavier work, for turning across the grain. This cast iron faceplate is precision machined on external faces to a tolerance of 1/1000th of an inch for each inch of radius and CNC turned for exceptional accuracy and balance. It features concentric circular grooves to aid the centralising of smaller workpieces. -
Designed to hold wood securely without splitting, this drive centre gives superior hold. The opposing tooth profiles mean that as they enter the wood, the fibres are pushed together rather than apart, holding the timber together. -
A good quality tailstock live centre is an essential accessory when turning between centres. Unlike traditional stationery centres, a live centre rotates with the wood, eliminating burning and increasing hold. All Record Power live centres feature high quality bearings to give long life and resist pressure during use. Sealed for life bearings ensure reliable, long lasting operation. -
Woodturners drill chuck, supplied with chuck key. -
Rotating centre with 5/16” bore for long hole boring. Based around a standard duty configuration. Also useful for spindle turning when there is a danger of a centre point splitting the stock. Set comprises: Hollow rotating centre, nose cone for use as standard centre, centring rod. -
1” diameter 4 prong head. Head relieved behind flutes to prevent binding. Supplied with inter-changeable point, pilot and hex key. -
Sleeve for using 1 Morse Taper accessories on a 2 Morse Taper lathe. -
Designed specifically with pen turners in mind. This finishing kit consists of nine different, colour coded, foam backed sanding pads measuring 10cm (4") x 8.5cm (3.1/4"). Includes the following grit sizes: 1500 - Rust 1800 - Green 2400 - Black 3200 - Tan 3600 - Wine/Brown 4000 - Teal 6000 - Purple 8000 - Royal Blue 12000 - Grey Suitable for wood and acrylic blanks . -
Sheffield stainless steel stamped bread knife blade, length 200mm, overall length 245mm including tang. Simply add wooden handle. -
Stainless steel pizza cutter. Turn a handle to create a useful pizza cutter, cutter diameter 100mm, overall length wheel and tang 150mm . -
If you have some woodturning experience, now you can create something truly special for family and friends. These beautiful hand-crafted toys are as enjoyable to make as they are to play with. Clear step-by-step instructions, detailed photographs and easy-to-follow diagrams start with simple toys and increase in complexity. Projects are a mixture of pure turned ones and also basic constructs, whereby turned items may be cut apart and resectioned to create something different. The 20 charming projects include simple turned animals, spinning top, tea party items, skittles, stacking blocks, pull-along train and indoor quoits. Each project is designed to be tactile and visually attractive as well as fun to use, and all toys are long lasting and comply with safety standards. -
For thousands of years mankind has created hollow forms to store either everyday objects or things of value – but functional objects can also be beautiful in their own right. This comprehensive book will guide the beginner through everything they need to know to get started with turning their own hollow forms. You will learn how to work with different types of wood, which tools to use and how to apply basic techniques with confidence. Learn the basic principles of form, proportion and design and how to apply this knowledge to your own work. Seven striking projects are set out in a clear step-by-step format and progress in difficulty. -
Small-scale turning is one of the most exciting challenges available to the wood turner, and offers a vast range of possibilities, from small vases and boxes to scale models of furniture and machinery. This book tells you all you need to know in order to get started on this absorbing craft: how to season and store your wood, how to choose the appropriate tools, and even how to make some tools for yourself, which is not as difficult as it sounds. Compared to other forms of turning, small-scale work is economical in terms of materials and equipment, and small pieces are easier to sell than large ones. But above all, small-scale turning is fun! The following attractive projects are covered in step-by-step detail: turquoise and tulipwood vase, metal-foil bowl with stand, miniature table, lidded box with finial, alabaster vase, lathe, spinning wheel, and fountain pen. This is a no-nonsense guide to the tools, materials and skills for miniature scale wood turning, assuming no previous knowledge of the craft. -
Part of the exclusive range of Coronet lathes from Record Power, the Envoy is perfect for the woodturner who regularly needs the power, stability and capacities necessary for large scale work. Designed as a natural progression from the Coronet Herald, it is supported by large and heavy integral cast iron legs to give ample protection from vibration while turning out of balance timbers.
The overall heavy-duty construction of the machine, along with the finely engineered and machined components make this lathe a pleasure to use. -
Regent Variable Speed Lathe is the largest lathe in the exclusive range of Coronet lathes from Record Power and is ideal for the woodturner who regularly needs the power, stability and capacities necessary for very large scale work. It is supported by large and heavy integral cast iron legs to give ample protection from vibration while turning out of balance timbers. The overall heavy-duty construction of the machine, along with the finely engineered and machined components make this lathe a pleasure to use. -
Out of stock
Laguna 18|36 REVO Lathe is designed for the user. Strength, stability and control are at the heart throughout to satisfy true specialists and woodturning professionals. One of the striking features of the lathe is an ergonomic panel with controls mounted in an anodized aluminium plate. The speed is smoothly controlled with a tactile rubber augmented knurled aluminium dial. Add the blue hue of the speed indicator and this machine stands out from the competition. The solid bed, with an impressive width of 208mm, is made of high-quality steel ASTM A36 (tougher than cast iron), and is precisely ground providing smooth travel of the headstock, tailstock and toolrest. The spindle is run by a highly efficient induction motor with a VFD frequency convertor for high torque even at lower speeds. The speed range can be changed with a clever one-lever mechanism. The headstock, tailstock and legs of the lathe are made from cast-iron securing minimum vibration and high comfort for turning of oversized pieces. Tailstock and Headstock cam lock levers are placed on the back of the machine and will not get in the way. All cam lock levers have soft grip handles and a long length resulting in a firm feel with no deflection. Supplied with 2MT four prong drive centre, 2MT revolving tail centre, 75mm (3") diameter faceplate, knock-out bar, onboard storage for accessories, 1.8m power cable with UK 3 pin plug. -
Innovation has been key to the progress of the Laguna brand and it is fully embraced here in the REVO 12/16 Midi Lathe. To overcome the issues of a traditional DC motor (Low torque at low speed and inability to achieve very low speeds) the controller uses the revolutionary Pulse Width Modulation system which feeds a succession of voltage pulses to the motor, monitoring the speed and automatically making adjustments to keep the speed constant. The result is a fantastic level of torque even at the incredibly low speed of 50rpm. The controls are mounted in an anodized aluminium plate, the ergonomic design is well positioned with a clear digital speed read out and easy access to all controls. The variable speed is smoothly controlled with a tactile rubber augmented knurled aluminium dial - A joy to use. Supplied with 2MT four prong drive centre, 2MT revolving tail centre, 75mm (3") diameter faceplate, 1.8m power cable with UK 3 pin plug. -
This set contains the three essential tools for spindle turning - 1” spindle roughing gouge, 3/8” spindle gouge and 1/8” parting tool.These tools are manufactured to a standard that makes them perfect for use by demanding professionals but also at a cost which makes them ideal for the novice turner. Designed in consultation with and tested rigorously by professional woodturners, they represent a new standard in quality and value.The blades are made of high speed steel to keep their cutting edge longer and the handles of close-grained, stable and heavy beech. The shape of the handles has been specially designed, based on the requirements of experienced woodturners, to provide a strong and comfortable grip, leaving you free to concentrate on turning. -
This set contains the three essential tools for bowl turning - 3/8” bowl gouge, 1/2” domed scraper and 3/16” parting tool.These tools are manufactured to a standard that makes them perfect for use by demanding professionals but also at a cost which makes them ideal for the novice turner. Designed in consultation with and tested rigorously by professional woodturners, they represent a new standard in quality and value.The blades are made of high speed steel to keep their cutting edge longer and the handles of close-grained, stable and heavy beech. The shape of the handles has been specially designed, based on the requirements of experienced woodturners, to provide a strong and comfortable grip, leaving you free to concentrate on turning. -
The Round Carbide cutter turning tool has a circular cutting tip, 15mm in diameter. The profile makes it ideal for cutting coves in spindle work. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
The Square Tip tool features a 15mm square cutting tip, each side having a very slight radius. It can remove quite a lot of material quickly. On the other hand it is more than capable of delicate refining cuts, flat or at a shear angle. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
The Diamond Point cutter has 15mm long edges, perfect for fine detailing, deep vee cuts, and the side edges can refine convex curves. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
Sale!
This heavy cast iron attachment allows for the turning of larger workpieces.*toolrest not included -
Out of stock
Basswood is an ideal wood for woodcarvers and whittling. Its soft, fine, even texture makes it easy to work with, while its pale inconspicuous colour doesn't distract from the carved patterns of the finished product. It can take stain and polishes without difficulty. -
Out of stock
Basswood is an ideal wood for woodcarvers and whittling. Its soft, fine, even texture makes it easy to work with, while its pale inconspicuous colour doesn't distract from the carved patterns of the finished product. It can take stain and polishes without difficulty.
-
Twist Pen with ball end clip, available in Chrome, Gun Metal or Gold. Black ink refill, for this pen use 7mm bushing set.
-
Hampshire Sheen - Cellulose Sanding Sealer 500ml is pre-thinned, giving you absolute control of the provided surface. Supplied in 500ml tin. -
Hampshire Sheen - Inlays, metal powder and decorative sand inlays are a popular choice to team up with the CA glues. Powders supplied in 250g-350g bottles, Sands in 250g & 350g shakers. -
Out of stock
Deep orange-brown timber with broad medullary rays creating a flame pattern on quarter cut faces or numerous spots on flat sawn surfaces. Hard and heavy with a slightly coarse texture. -
Out of stock
Ash is a cream to olive brown timber with a darker heart which comes from larger logs. Has a straight to wavy grain with a course texture. Machines and turns well and takes an excellent finish. -
If you’re looking for a clear finish that is tough, hardwearing and gives a satin lustre yet is still very easy to apply, even on larger areas, you’re in the right place.
Hard Wax Oil is a particular blend of tough oils combined with special waxes which dries to an exceptionally resilient finish. Ideal for anything that is going to be subjected to water splashes or a lot of handling this oil may not be indestructible but it will stand up to a lot of abuse.
It retains the ease of application typical of an oil and it stays wet long enough to get a smooth, even finish – even on large areas – but is touch dry and tack free in about 20 minutes, and better yet is ready for a second coat after about four hours (in normal conditions).
Hard Wax Oil will build to a bright gloss finish after 2-3 coats. Rub down lightly between coats with a fine abrasive. Once hard dry (allow at least 24 hours) it can be brought to an even brighter shine using either the buffing wheel system or burnishing cream.
For a not-quite-so-bright finish use a mild abrasive to reduce the gloss. For best results lubricate the abrasive with microcrystalline wax to retain the toughness of the oil.
-
Dark purple-brown with black streaks, giving an almost black appearance. Generally straight grained with a fine even texture. Finishes exceptionally well. -
Metal holders require a hole approximately 42mm diameter x 17mm deep. The glass holder requires a hole approximately 48 mm dia x 26mm deep . Available in a glass, brass, copper and polished steel finish. -
Record Power Domed Scrapers (round-nose scrapers) feature a left-hand sweep to the grind, which allows them to be used on the insides of bowls with ease. Ideal for removing gouge marks and general smoothing work. -
Record Power Bowl Gouges feature an improved flute profile, designed to help clear shavings quickly for more effective and faster cutting. -
Record Power Parting Tools mainly used for parting the finished workpiece from the waste wood. With the correct technique they can also be used for creating beads and patterns - a truly useful and essential tool. -
Record Power Skew Chisels probably the most versatile tool for working between centres - they can give a silky smooth finish and may also be used for creating beads, coves and other decorative elements. -
Record Power Spindle Gouges these are ideal general-purpose spindle tools, ideal for producing beads, coves and sweeping profiles across a wide range of projects. -
Record Power Spindle Roughing Gouges designed for use between lathe centres on parallel grain, the deep and wide flutes of these gouges remove material with speed. Ideal for roughing out spindle blanks but they can also be useful for some finer work. -
Milliput Epoxy Putty, the two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process). Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C. Shelf Life: Recommended that Milliput is stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years. Available in six colours: Standard (Yellow/Grey), Terracotta, Silver Grey, Black, Superfine White and Turquoise Blue. -
Out of stock
While this resin has been manufactured to resist scratching and resistance to marking from heat sources we must stress this resin will still mark if sharp items are moved across the surface or hot items are placed on the surface.
As with all casting products, we stress that customers should purchase a small amount to perform initial tests to ensure suitability for their project and requirements.
Pigmentation Epoxy pigments are the recommended system to colour this resin however the polyester range of pigments will also work. Please read the Technical and Safety Data sheets prior to use. We recommend small scale testing to ensure compatibility before using at full scale. Cold Weather Notice Cooler temperatures in the UK and Ireland around mid-autumn to mid spring are not ideal conditions for water clear epoxy systems, this can increase the chances of crystallisation in the resin (this can occur at room temperature depending on circumstances, it is however much less common). Appearance can differ depending on the degree of crystallisation, from small lumps sitting on the surface to a hazy/milky white appearance, extreme cases the contents may completely solidify. Crystallisation occurs due to a phase change from liquid or solid similar to that of water turning to ice, fortunately it is easily reversed by warming the epoxy component to 60°c. Ensure any crystals are completely removed as remaining crystals can act as a seed causing the crystals to form again quite quickly. Lab results show the heating cycle to remove crystals can be repeated on multiple occasions before beginning to suffer from any losses in resin properties. We recommend keeping the resin system at a good room temperature at all times where possible, ensure to clean the lids and bottle necks of containers with isopropyl alcohol / acetone allowing the solvent to evaporate before replacing the lid.Product Data Units Mix Mix Ratio Weight 100 : 50 Hardness ShoreD 80 - 85 Viscosity (25°C) mPa.s 600 - 900 Density (25°C) g/cm3 1.09 – 1.13 Pot life (200g, 25°C) Mins 25 - 30 Cure Time (200g, 25°C) Hours 24 Full Cure (25°C) Days 7 Recommended Casting Thickness mm 1 - 5 -
Llewellyn Ryland Polyester Pigment are coloured liquid/paste mediums based on pigments dispersed within a solvent-free reactive unsaturated polyester resin. They are available in a wide range of colours varying in strength and consistency depending upon the particular colouring application. They have been developed to blend easily into resin systems. The range of colours is based upon pigments carefully selected for colour fastness, opacity, heat stability and having minimum effect upon the curing characteristics of the final system. The resin used with the Polyester Colour Paste is a specially developed solvent-free reactive polyester resin which chemically cross links with the moulding resin so that the colour is "locked in" once the system has cured. They can be used to colour most polyester resin based systems used within the composites or related industry. These Polyester Colour Pastes have excellent stability. -
Features:- Fine control of heat and precise handling of the burning head, variable heat, up to 1100º C.
- The pen (for handpiece) has a cool running and lightweight handle which remains comfortable even after many hours of use.
- Writes quickly and as fluently as a fountain pen.
- Cost effective replacement points.
- The ability to shape your own points from specialist wire with the supplied fine wire, perfect for fine detailed burning. Thicker wire is available, ideal for enhancing bird or stick carving.
-
- Designed for use with the Peter Child Pyrography machine: two pen flexibility at the flick of a switch.
-
- Make points to your shape and design using wire cutters and pliers. One reel can make in excess of 150 points. Hammered flat, they can be used as a blade for burning feathers, grass or fur, or file the wire to a needle point for minute detail.
-
Made from Nickel Chromium wire and with normal use will last many years. -
The SC1 and SC2 are the first mini-chucks on the market to offer woodturners a premium-quality solution for those who regularly turn small, intricate items - bringing the world-renowned quality of the SC3 and SC4 to the mini-chuck market. The SC2 is a direct-thread chuck and features a larger diameter body than the SC1, at 63.5 mm (2 1/2”), giving larger holding capacities than the SC1. -
The SC1 and SC2 are the first mini-chucks on the market to offer woodturners a premium-quality solution for those who regularly turn small, intricate items - bringing the world-renowned quality of the SC3 and SC4 to the mini-chuck market. The SC1 works in conjunction with a separately available insert, which means it can be used across a wide variety of lathes with different thread sizes, with a simple change of insert. It also makes a perfect partner to the SC4 chuck, as the inserts are a universal fit between both chucks. It also has a very compact 53.5 mm (2”) diameter body - giving easier access around the workpiece making it ideal for the turning of very small items. Insert must be bought separately. -
Liberon Finishing Oil is a blend of high quality oils for use on all interior wood and turned woodwork. Used to nourish and enhance the colour of the wood, it is suitable for use on kitchen tables and bathroom furniture, and can also be applied to cork, stone and terracotta. Water, heat, alcohol and food acid resistant, it gives a matt, satin or gloss finish depending upon the number of coats applied. Ideal for surfaces requiring a hard wearing and water-resistant finishes. -
Liberon Quick Drying Tung Oil is a high quality natural oil for protecting interior and exterior wood. It provides a hard-wearing finish, and is ideal for surfaces such as tables and furniture. A quicker drying version of Liberon Pure Tung Oil, each coat dries in approximately four hours, and is highly resistant to water, alcohol and food acids. Being a penetrating oil it allows the wood to age gracefully and develop a natural patina. It provides a long-lasting matt finish. -
Mylands Blonde Dewaxed Shellac Flakes are used to produce a transparent, brown-coloured French Polish which is often used in antique restoration or the bespoke production of furniture. Easy to use, it is ideal for use on lighter coloured woods. -
2.5 metres of flexible hose for use with 2.5" diameter systems. -
Out of stock
New generation P3 R half mask, with low profile ergonomic design.- Offers less breathing resistance.
- Less clogging pressure and inward leakage.
- Approval P3 (R) APF20 x WEL
- Protects the user against airborne particles, oil aerosols, mist, welds and fumes.
- Twin HEPAC* pleat encapsulated design filter provides 99.99% filtration of airborne particles and aerosols at 0.3 micron and above.
- Exhalation valve on bottom of face piece, ensuring no exhalation fumes steam or fog of any glasses/visors.
- Protective grill covers 100% of filter surface.
- Grill protects filter from moisture and particulates, ensuring it performs better in clogging pressure and filtration efficiency.
- Unique integral sample port and plug allow non-destructive face fitting.
- Large non-return valve.
- Single piece head and neck strap with quick release.
- Manufactured from high-grade materials, odour free, non-allergenic. TPE mask body is latex and silicone free.
- Conforms to half mask standard BS EN 140.
- Respiratory protection to BS EN143 P3R.
- *High Efficiency Particulate Air Composite.
- Protection against airborne Coronavirus
-
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Record Sabre-250 10" Bandsaw, by taking the most relevant features from the existing SABRE series and applying them to the BS250, Record believe they have produced the best benchtop bandsaw available on the market below £400 / €500. In addition, the capacities, power and performance upgrades, combined with the unique SABRE features now found on this machine, make it a real contender in the general purpose floor-standing bandsaw category when combined with the BS250-AW stand and wheel kit. In this configuration it has quality and features well ahead of many of the lower cost floor-standing machines available in the market. The end result is a premium-quality, affordable bandsaw which retains the compact size of the BS250 while offering improved capacities, usability, accuracy and performance.
-
Sale!
The Record 8" Buffing Machine is the ideal solution for buffing and polishing woods as well as some metals and can be used in conjunction with pastes and compounds on a wide range of surfaces. It features a heavy-duty cast iron base which can be bolted to a bench and rubber feet to reduce vibration, making for smooth and stable running. The machine is supplied with two high-quality 8” (200 mm) diameter fine buffing wheels to ensure an excellent finish is achieved. -
The BM16 is a compact bench mounted morticer, introducing new levels of accuracy, ease of use and industrial features at an affordable price. The table is finely ground cast iron and moves smoothly and effortlessly front to back and side to side on machined dovetail slides. To ensure unsurpassed accuracy, the slides are fully adjustable using the easily accessible gib strips. An important feature of the table is the heavy and solid clamp, the likes of which are usually only seen on more industrial machines, which holds workpieces extremely securely, ensuring no movement during operation. The clamp is also repositionable, allowing a wide range of timber sizes to be accommodated. Movement of the chisel is similarly smooth and accurate, with a gas spring and dovetail slides, which feature adjustable gib strips, allowing cuts to be made with ease and precision. To further increase accuracy and speed of use, the BM16 also features sideways movement stops as well as vertical movement stops. These stops allow the depth and width of mortices to be set in order to achieve consistent results again and again. -
This package contains all the sharpening jigs needed for woodturning tools and offers excellent value for money. Contains: WG250/A Gouge Jig WG250/B Short Tool Jig WG250/I Tool Rest Jig WG250/N Profiled Leather Honing Wheel
-
Sturdy floor stand for the BDS250 Belt & Disc Sander. -
Pedal wheel kit for the BDS250 Belt & Disc Sander. Ideal for moving the machine around the workshop. -
for use with BDS150 for 6" x 4" Belt & Disc Sander -
The DS300 is a superbly built and heavy duty disc sander; a real workhorse that will provide years of reliable service in the workshop. Featuring a cast iron body, disc and table, this machine is more than capable of withstanding heavy sanding tasks. The powerful motor provides plenty of power and torque to easily handle large sections of timber and the dynamically balanced disc ensures smooth operation. This machine is in a different league to other disc sanders. When seen in action, the build quality and performance speak for themselves. -
The Record Power RSBG8 Bench Grinder has a long-established reputation for robustness and reliability, making it the perfect choice for the home workshop. This new and upgraded machine has an industrial-inspired design with a heavy-duty motor and offers improved power, stability and performance. It features fully adjustable tool rests with solid locking mechanisms to give optimum support. The cast iron base and sturdy body reduce vibration to give the smooth operation that is essential for successful and accurate sharpening. Rubber feet also dampen vibration whilst ensuring the grinder does not move during use. The wide body of the machine further increases stability and minimises the load on the bearings for increased life. The 40 mm white stone is ideal for giving a fine finish, particularly to HSS turning tools, while the more coarse grey stone is perfect for rougher grinding and shaping. In addition, the spark guard of the white wheel features a magnifying lens to aid fine sharpening. The build quality and reliability of this grinder is significantly higher than some of the more common and cheaper machines which generally have lower powered motors and are substantially lighter. Record Power grinders are designed to give many years of service and replacement stones are readily available should the original ones become worn out, a sure sign of the robustness of these machines.
-
The cast iron outrigger for the Coronet Envoy and Coronet Regent allows for the full capacity of the lathe to be used when turning bowls with the head swivelled. -
Adds 407 mm extra capacity between centres to the Coronet Herald lathe.
