-
Long series sawtooth Forstner cutter Long series forstner bit (inch), sawtooth pattern, particularly suited for cutting down the grain. Long series - all sizes are a minimum of 150mm long, will produce over-lapping holes, resharpenable. -
Long series sawtooth Forstner cutter Long series forstner bit (mm), sawtooth pattern, particularly suited for cutting down the grain. Long series - all sizes are a minimum of 150mm long, will produce over-lapping holes, resharpenable.
-
Re-chucking bowls and platters for finishing or light shaping has always been something woodturners want to solve. The longworth style chuck makes it easy. This self-centring scroll operation quickly adjusts to fit the work and tightening only takes a few seconds. Designed for clamping in a traditional 4 jaw-self-centring chuck using standard 50mm dovetail jaws. It eliminates the time and hassle of removing and remounting chuck jaws needed when using regular re-chucking jaws. Non-Marking premium silicone grippers provide pliable yet firm gripping power Precision cut, plates provide ultimate performance and reliability 600 RPM maximum. Chuck size indicates the minimum lathe swing for which it is intended maximum external gripping capacity is approximately smaller than chuck diameter. -
Record Power's powerful work lamp is a perfect addition to any workshop. The long flexible neck allows it to be positioned to illuminate even the most hard-to-reach areas and get rid of troublesome shadows, giving a clear view of the work in progress. To further increase the lamp’s flexibility, a sliding collar on the lamp head allows either a spotlight or floodlight beam to be created. The strong magnetic base and magnetic side clip mean the light can be secured virtually anywhere on a machine. Powered by either standard AA batteries or a USB rechargeable lithium battery, this lamp gives hours of uninterrupted use and is ideal for a wide variety of machines such as scroll saws, bandsaws, sharpening machines, lathes and many more.Includes:• Magnetic base• Magnetic side clip• AA and Lithium battery holders• Micro USB-A cable -
Gold or Chrome plated magnifying glass with glue on ferrule. 65mm diameter frame with 3 magnification. (inner dimensions of ferrule: 17mm x 20mm depth). -
Wooden display box in maple for 7mm pens, in white carton for protection. -
Wooden display case in maple for 7mm pen, in white carton for protection. -
Sale!
This heavy cast iron attachment allows for the turning of larger workpieces.*toolrest not included -
Sale!
3" Snap-in Coarse Angle Blade- Cuts - doesn't scrape or tear
- Creates shavings rather than dust
- Made from 400 series stainless steel
- Cuts up to 10 times faster with less effort than similar products
- Dimensions: 75mm x 18mm
-
Sale!
3" Snap-in Coarse Flat Blade
- Cuts - doesn't scrape or tear
- Creates shavings rather than dust
- Made from 400 series stainless steel
- Cuts up to 10 times faster with less effort than similar products
- Dimensions: 75mm x 18mm
-
Sale!
3" Snap-in Coarse Round Blade
- Cuts - doesn't scrape or tear
- Creates shavings rather than dust
- Made from 400 series stainless steel
- Cuts up to 10 times faster with less effort than similar products
- Dimensions: 75mm x 18mm
-
Sale!
3" Snap-in Fine Angle Blade
- Cuts - doesn't scrape or tear
- Creates shavings rather than dust
- Made from 400 series stainless steel
- Cuts up to 10 times faster with less effort than similar products
- Dimensions: 75mm x 18mm
-
Sale!
8" Snap-in Fine Angle Blade- Cuts - doesn't scrape or tear
- Creates shavings rather than dust
- Made from 400 series stainless steel
- Cuts up to 10 times faster with less effort than similar products
- Dimensions: 205mm x 30mm
-
Milliput Epoxy Putty, the two sticks have a long shelf life but once mixed the resultant putty is at first soft and highly adhesive and then gradually hardens. Speed of hardening is dependant on temperature and at normal temperatures (20-25ºC) Milliput becomes rock hard in three to four hours. By the application of heat the setting time can be reduced to a few minutes. After setting hard Milliput continues to cure and is fully cured after an elapse of time equal to the setting time at the same temperature. Once fully cured Milliput can be machined, drilled, tapped, turned, filed, sawn, sandpapered and painted. Milliput can be sandpapered and painted immediately it has set. (it is advisable to wear eye protection during this process). Milliput is an excellent adhesive and will bond any of the following to itself or to any of the others - wood, brick, cement, metals, concrete, plastics, glass etc, but note that Milliput is not intended as a thin layer adhesive and should not be used where a paste, mucilage or thin glue is indicated. Milliput will set under water and is heat resistant up to 130°C. Shelf Life: Recommended that Milliput is stored in cool, dry conditions. Please reseal bags after use. Stored correctly this product should remain workable for about 2 years. Available in six colours: Standard (Yellow/Grey), Terracotta, Silver Grey, Black, Superfine White and Turquoise Blue. -
Perforated design which allows the dust to escape without clogging. mixed pack of 15, 3 of each of the following 5 grits, 120G, 180G, 240G, 320G 400G, 70mm x 125mm. -
Perforated design which allows the dust to escape without clogging.
-
With 28 LED bulbs mains powered, Charnwood's magnetic base light is ideal for any situation where better lighting is required. The flexible arm is 370mm long and is fixed onto a magnetic base that can be turned on and off allowing the LED light to be securely attached to any steel or cast iron base. With 28 LED lights it produces better light than many with the added advantage of emitting very little heat. There is a seperate on / off switch for the LED light and it runs off a standard 240v, 13amp socket and comes complete with a 1.2m cable. Ideal for use with;- Bandsaws
- Lathes
- Pillar drills
- Scroll Saws
- Underpinners
Specification
Number of LEDs 28 Brightness 180 Lumens Shaft Length 370mm Weight 1.4kg Rating Trade Warranty 1 Year -
Mopane is a very heavy, dense timber. Dark red/brown in colour generally streaked with black. Narrow straw coloured sapwood. Turns well with care and polishes to a lustrous finish. -
Mopane is a very heavy, dense timber. Dark red/brown in colour generally streaked with black. Narrow straw coloured sapwood. Turns well with care and polishes to a lustrous finish.
-
Sleeve for using 1 Morse Taper accessories on a 2 Morse Taper lathe. -
1" x 20' abrasive in a convenient dispenser. Perfect for spindle, pen, or any turning where small strips are needed. This convenient dispenser is loaded with five 1" x 20' rolls of cloth backed aluminum oxide abrasive. Each dispenser pack contains one roll of 150, 240, 320, 400 & 600 grit abrasive. Just pull out and tear off the length of abrasive strip you need. -
1" x 20' abrasive in a convenient dispenser. Perfect for spindle, pen, or any turning where small strips are needed. This convenient dispenser is loaded with four or 1" x 20' rolls of cloth backed aluminum oxide abrasive. Each dispenser pack contains one roll of 150, 240, 320 & 400 grit abrasive. Just pull out and tear off the length of abrasive strip you need. -
Although French polish is the general term for all types of Shellac Polish, it is also a product in its own right. Mylands range contains many blends of Shellac Polish which have been developed over the years to fulfil various different requirements – some of which are slightly modified products for a specific purpose. They come in various depths of colour, which give the French Polisher latitude to choose the most appropriate product for the timber being polished. Shellac products have a variety of uses from finishing antiques and reproduction furniture to acting as a barrier between two normally incompatible finishes. They are particularly useful when refurbishing furniture as they will seal in any wax product which may have been applied to the furniture in the past.
-
Mylands Blonde Dewaxed Shellac Flakes are used to produce a transparent, brown-coloured French Polish which is often used in antique restoration or the bespoke production of furniture. Easy to use, it is ideal for use on lighter coloured woods. -
Use as a wipe on sealer (2 coats) prior to applying High Build Friction polish or Melamine Lacquer. Very quick drying (3-6 minutes). -
Mylands wax polishes are manufactured from the finest natural ingredients including pure Beeswax and Carnuba wax. Mylands wax will help hide any surface scratches and produce a deep traditional sheen. On polished surfaces use sparingly and buff within a couple of minutes. -
Danish Oil is a specially formulated blend of natural and synthetic oils for use on wood products. A very durable penetrating oil suitable for both interior and exterior wood. Excellent heat and water resistance make this a very versatile finishing product. -
Sold world-wide as probably the market leader in Friction polish. After sanding surface very smooth, seal with either Cellulose Sanding Sealer or Lacacote Wood Sanding Sealer (wiped on). -
Shellac Sealers are used in the French polishing trade either; as a quick drying finish to seal timber after staining; or as a basecoat for subsequent coats of French Polish. -
Used for diluting French polish, Light Fast and Earth Stains, or cleaning surfaces and tools.
-
These extended jaws act like a pin chuck, expanding into a pre-bored hole. A useful technique for free form edge bowls as you don't have to bore an exact size as with other pin jaws. The longer jaws allow for a very powerful spigot grip for smaller work. Also features a small dovetail. Expansion 26 - 46mm Contraction square: 28 - 7mm Contraction spigot 31 - 10mm
-
Specially designed to provide a strong contracting grip to unsupported spigot turning applications, e.g. vases and goblets. It can handle spigots from 30mm (13/36inch) to 50mm (2inch). Also features expanding grip mode.
-
Fine finish starts with good preparation! Use these mildly abrasive pads after sanding for a final smoothing process to give a near-perfect surface prior to applying any finish. Very long lasting, these pads are also very flexible and do not crumble, thus avoiding contamination of your work. -
Fine finishing starts with good preparation! Use these mildly abrasive pads after sanding for that final smoothing process to give a near-perfect surface prior to applying any finish. Very long lasting, these pads are also very flexible and do not crumble, thus avoiding any fear of contamination of your work. Exercise care when using these pads with the lathe revolving.
-
Out of stock
The wood has good wearing properties and resistance to abrasion because of its interlocked grain and twisty nature. Olive does polish to an excellent finish. -
A low sheen finishing oil based on Tung Nut Oil, Beeswax, Citrus solvents and anti-fungal oils that penetrates the timber substrate to nourish, preserve and seal; as well as providing protection against weather degradation and rot. A natural alternative to petroleum hydrocarbons and water based oils -
Organoils Hi-Speed Finishing Oils specifically formulated for on-lathe, under-turning-speed finishing. It is a heavy oil which can well deal with the load (fill) requirements of softwoods - you may choose to cut it (with vegetable turpentine) for denser hardwoods. One of its unique ingredients is the rare, Mustard Seed Oil (a well kept Aussie secret until now!) which gives the formulation good slip for the wet-sanding procedure and a silken touch to the finished result. -
A penetrative, nourishing, quality finishing oil which reflects the original, heavy-oil formulations that traditional Danish Oils were renowned for. As a clear finish will richly enhance the existing woodcolour/s. For best results, requires quality dry-sand surface preparation; using 600 /1200 / 1500 grit papers (the finer the better) Upon curing/drying (min. 14 days) makes for ideally prepared surface for further (optional) Waxing/Polishing. -
A refined Beeswax and Citrus Oil polish with pleasant aromatics and emulsified into a ready-to-use paste. For the palest, brightest cabinetry finish offered in our range; a double wax application and polish (min. 24 hours apart) to raw, fine-sanded woodwork would be recommended. -
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 10 TPI -
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 15 TPI.
-
These pin end blades are ideal for use in machines that only accept pin end blades, but can also be used in machines that feature universal jaws. Their width makes them ideal for straighter cuts and for more arduous cuts, such as deep hard woods. Perfect for small joints and box making. 3 mm wide, 0.5 mm thick, 20 TPI.
-
The width of these pin end blades makes them ideal for straighter and more arduous cuts, such as deep hard woods. The tooth pattern makes them ideal for faster cutting as they provide better chip clearance than standard tooth patterns. 2 mm wide, 0.25 mm thick, 18.5 TPI. -
The width of these pin end blades makes them ideal for straighter and more arduous cuts, such as deep hard woods. The tooth pattern makes them ideal for faster cutting as they provide better chip clearance than standard tooth patterns. 3 mm wide, 0.5 mm thick, 9 TPI.
-
Out of stock
Featuring a spiral twist, these plain end HSS blades can cut in any direction without the need to turn the workpiece. This is particularly useful for projects that are too big for the throat depth of the scroll saw. They also allow for pieces to be cut with the bevel running in the same direction all round. 0.8 mm wide, 0.34 mm thick, 40 TPI. -
When freshly cut the wood is bright orange red, becomes reddish brown. Moderately hard and heavy. Medium texture, but with large pores. -
Out of stock
Heartwood is a vivid red when freshly cut, toning down to a medium to dark purple-brown on exposure, often with fine black lines. Sapwood is wide and greyish-white. Straight to interlocked grain with course texture. Finishes very well, tends to be dusty. -
Panga Panga is extraordinary in its rarity as it is only found, in commercially viable quantities, inMozambique. Its dark colours, with rich parenchyma bands brings a touch of the exotic to finished pieces. The heartwood is dark chocolate brown with paler broad bands. At 880kg/m3 the heartwood is extremely durable. It sands and finishes well. -
Panga Panga is extraordinary in its rarity as it is only found, in commercially viable quantities, inMozambique. Its dark colours, with rich parenchyma bands brings a touch of the exotic to finished pieces. The heartwood is dark chocolate brown with paler broad bands. At 880kg/m3 the heartwood is extremely durable. It sands and finishes well.
-
Six replacement paper motor filter bags for CamVac extraction machines. -
This practical new guide to pen and pencil turning, featuring 15 step-by-step projects. Pens from fine and rare timbers to acrylics and polymer clays, the possibilities are endless. Perfect for beginners to the lathe as well as more advanced turners, all the basic techniques and information needed for getting started are covered. From blank preparation to turning, sanding, polishing and assembling, everything is explained clearly and in jargon-free terms. -
Self-centring design. Unique support and threaded rod design for accurate drilling. Holds and centres pen blanks up to 1-1/2 inch square. Quick and easy set up. -
Out of stock
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 7mm, 8.5mm, 9.5mm & 10mm pens.
-
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 7mm pens.
-
Used to square the ends of the pen blank prior to turning and assembly. Mounts in drill chuck or universal pen mandrel. Suitable for 8.5mm, 9.5mm & 10mm pens. -
Out of stock
NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit -
Out of stock
NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit
-
includes: 3 x long series HSS tin coated drills: 6.8, 6.9 & 7mm, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x 7mm pen kits, cones and spacers to suit most sizes of pen kit -
includes: 3 x long series HSS tin coated drills: 6.8, 6.9 & 7mm, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x 7mm pen kits, cones and spacers to suit most sizes of pen kit
-
Features:- Fine control of heat and precise handling of the burning head, variable heat, up to 1100º C.
- The pen (for handpiece) has a cool running and lightweight handle which remains comfortable even after many hours of use.
- Writes quickly and as fluently as a fountain pen.
- Cost effective replacement points.
- The ability to shape your own points from specialist wire with the supplied fine wire, perfect for fine detailed burning. Thicker wire is available, ideal for enhancing bird or stick carving.
-
- Designed for use with the Peter Child Pyrography machine: two pen flexibility at the flick of a switch.
-
Pewter pot pourri lid approx 80mm diameter.
