-
unhandled turning gouge to fit the Sovereign System. -
Out of stock
This 18" tool can produce either massive profiling cuts or delicate finishing cuts as necessary, -
Sale!
The Record 8" Buffing Machine is the ideal solution for buffing and polishing woods as well as some metals and can be used in conjunction with pastes and compounds on a wide range of surfaces. It features a heavy-duty cast iron base which can be bolted to a bench and rubber feet to reduce vibration, making for smooth and stable running. The machine is supplied with two high-quality 8” (200 mm) diameter fine buffing wheels to ensure an excellent finish is achieved. -
This live centre kit gives woodturners a huge amount of flexibility, allowing for a wide range of work to be undertaken. The finely engineered live centre body features two sealed-for-life bearings for faultless, smooth performance. The high-precision manufacture ensure that the tips are a perfect fit in the live centre body and a rubber O-ring holds them in place securely. The tips are easily removed from the lathe tailstock using the supplied knockout bar. In addition to the many operations the tips make possible, the live centre body itself can be used to carry out long hole boring – with no tips fitted, it acts as a ring centre to support the workpiece and the body is fully bored to accept the standard 5/16” (8 mm) long hole boring augers.
Coronet Falcon Interchangeable Live Centre Traditional Tip
This traditional design features a 60º tip, to give effective penetration into the workpiece, supporting large timbers well. It is ideal for use on spindle work and can also be used to support headstock-mounted bowls and larger vessels from the tailstock. Internal support can be given to pre-bored timbers with bores from 1 to 43 mm in diameter, across the full range of the live centre cone taper.
Coronet Falcon Interchangeable Live Centre Detail Tip
This elongated single-point tip gives greater access to the workpiece at the tailstock - ideal for removing the bottoms of bowls, creating small dowels and much more. The tip is angled at 90º rather than the traditional 60º, ensuring the load is spread across a larger area, reducing the chance of splitting small, delicate workpieces.
Coronet Falcon Interchangeable Live Centre Multi-Tooth Tip
This multi-tooth live centre tip features a ring of teeth around the circumference, with a central drive point to give accurate positioning. This design gives an extremely strong grip, thanks to the many points of contact in the timber, which also minimises the risk of splitting the timber.
As the grip is spread across many small teeth rather than 4 or 6 prongs, it is possible to grip the timber sufficiently just by using the clamping pressure of the lathe tailstock.
Another benefit of this design is that your work can be removed from the lathe and accurately repositioned, using the markings created in the timber by the centre point and ring of teeth as an accurate guide.
This tip also gives a fantastic grip to paper-joint wood blanks, as the ring of teeth grip on many points across the drive’s circumference across both sections of wood on either side of the joint.
It makes an ideal partner to the range of Coronet Hawk Multi-Tooth Drive Centres, allowing timber to be held securely at both ends of the lathe quickly, easily and accurately.
Coronet Falcon Interchangeable Live Centre Pen Turning Tip
The pen turning tip is a game-changer for pen turners. Rather than use the screw at the tailstock end of the pen mandrel to secure the pen blanks, mechanisms and spacers in place, the pen turning tip simply slides over the mandrel and registers against the spacers. Tailstock clamping pressure is then used to secure the pen components in place between the headstock and tailstock.
This method means that no pressure is applied to the mandrel itself, eliminating the risk of bowing the mandrel which can cause the final pen to have uneven wall thickness, which in turn stops the pen’s components aligning correctly. Using the pen tip will help you create the most accurate and well-made pen possible. In addition, this method is fast, easy and secure, making it a great time-saving operation for prolific pen turners.
-
includes: 3 x long series HSS tin coated drills: 6.8, 6.9 & 7mm, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x 7mm pen kits, cones and spacers to suit most sizes of pen kit -
includes: 3 x long series HSS tin coated drills: 6.8, 6.9 & 7mm, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x 7mm pen kits, cones and spacers to suit most sizes of pen kit
-
Sturdy floor stand for the BDS250 Belt & Disc Sander. -
To fit the Coronet Herald, giving extra height when mounted to a bench or leg stand. -
Out of stock
Another 'Crown' special, this long boring tool is made completely from High Speed Steel with a spiral flute, which results in removing wood easier and quicker than ordinary Augers. -
Its small scale makes it ideal for smaller hollow forms.-
- ½" Flat surface allows for aggressive hollowing
-
- Swivel clamp allows under cutting
-
- One curved tip (RS111C) for flowing shapes
-
- A second pointed tip (RS112C) for square shapes
-
- Teardrop scraper cutter acts as a round, half round and square scraper all in one
- Full instructions included
-
-
Multi Tip Hollowing Tool incl. 2 hollowing tips and a finishing scraper. Designed specifically to fit the Sovereign System. The RS200KT multi-tip hollowing tool is one of Robert Sorby’s most versatile tools. Its massive half round shank and interchangeable tips make it capable of multiple applications. A Robert Sorby legend, this tool is a must-have for every turner’s collection. -
The wheel kit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis. -
Crown Tools Ultra high performance 'Razor Edge' lathe turning tools combine the use of cobalt infused M42 HSS with Crown's sophisticated cryogenic treatment process to give a superior cutting edge. With beautifully crafted and distinctive 'Copper Black' handles to their 'Super Sharp Blades' these chisels are worthy of a woodturners tool collection. -
Pedal wheel kit for the BDS250 Belt & Disc Sander. Ideal for moving the machine around the workshop. -
Designed for deep hollow forms these tools have a polished H.S.S. adjustable top section which gives complete control on the depth of a cut.
-
Out of stock
NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit -
Out of stock
NEW Deluxe Model comes with Dust Free Collet includes: 7mm drill bit, universal pen mandrel, locknut kit, pen blank trimming tool, 5 x pen kits, 7 & 10mm spacers to suit most sizes of pen kit
-
The Multi Tip Hollowing Tool (RS200KT) is our recommendation for those who wish to take their first steps in hollowing and those working on projects of 6 inch and under. It is one of the most versatile tools around. -
This stand and wheel kit provides great flexibility for those with a small workshop or for people who may need to move the machine on a regular basis. -
6mm hook and straight mini carbide set. Excellent carbide tools for boxes and small hollow forms. Bars are made from stainless steel for strength. The hook is forged to shape with the cutter tipped slightly downwards for easy controlled cutting. Max depth is recommended as no more than 5-6" deep for this set. -
This set contains the three essential tools for spindle turning - 1” spindle roughing gouge, 3/8” spindle gouge and 1/8” parting tool.These tools are manufactured to a standard that makes them perfect for use by demanding professionals but also at a cost which makes them ideal for the novice turner. Designed in consultation with and tested rigorously by professional woodturners, they represent a new standard in quality and value.The blades are made of high speed steel to keep their cutting edge longer and the handles of close-grained, stable and heavy beech. The shape of the handles has been specially designed, based on the requirements of experienced woodturners, to provide a strong and comfortable grip, leaving you free to concentrate on turning. -
This set contains the three essential tools for bowl turning - 3/8” bowl gouge, 1/2” domed scraper and 3/16” parting tool.These tools are manufactured to a standard that makes them perfect for use by demanding professionals but also at a cost which makes them ideal for the novice turner. Designed in consultation with and tested rigorously by professional woodturners, they represent a new standard in quality and value.The blades are made of high speed steel to keep their cutting edge longer and the handles of close-grained, stable and heavy beech. The shape of the handles has been specially designed, based on the requirements of experienced woodturners, to provide a strong and comfortable grip, leaving you free to concentrate on turning. -
Gift Card available to use against any product or course. -
Re-chucking bowls and platters for finishing or light shaping has always been something woodturners want to solve. The longworth style chuck makes it easy. This self-centring scroll operation quickly adjusts to fit the work and tightening only takes a few seconds. Designed for clamping in a traditional 4 jaw-self-centring chuck using standard 50mm dovetail jaws. It eliminates the time and hassle of removing and remounting chuck jaws needed when using regular re-chucking jaws. Non-Marking premium silicone grippers provide pliable yet firm gripping power Precision cut, plates provide ultimate performance and reliability 600 RPM maximum. Chuck size indicates the minimum lathe swing for which it is intended maximum external gripping capacity is approximately smaller than chuck diameter. -
Set of 12 chisel profiles, the RPCV12/A, also includes a tuitional DVD and booklet from internationally acclaimed carver and teacher Mike Davies. Mike has developed his unique and highly successful 'carving by numbers' system as a way to impart his years of expertise, ideal for the novice carving enthusiast. This DVD features his Significant Six carving techniques that will form a solid foundation upon which skills can be built. For more details and to see a video click on more info button. -
The Round Carbide cutter turning tool has a circular cutting tip, 15mm in diameter. The profile makes it ideal for cutting coves in spindle work. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
The Square Tip tool features a 15mm square cutting tip, each side having a very slight radius. It can remove quite a lot of material quickly. On the other hand it is more than capable of delicate refining cuts, flat or at a shear angle. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
The Diamond Point cutter has 15mm long edges, perfect for fine detailing, deep vee cuts, and the side edges can refine convex curves. Crown Carbide Pro turning tools are highly efficient when turning wood and are very effective when turning acrylic, polyester and resin. The tool has 20mm x 13mm shaft made from chrome vanadium steel. The weight keeps the tool on the tool's rest and, combined with a 355mm long handle, ensures effortless control. In use, the tool works best when flat and level, cutting at centre height or, with the handle slightly raised, cutting just below centre. The sides of the bar have a gentle radius allowing controlled shear cuts. Each tool comes with a hex key and spare machine screws. -
Record SC3 Chuck Package is lighter and more compact than the SC4, making it ideal for use on any lathe, particularly small to medium sized machines and is still compatible with the full jaw range. The compact design reduces load on the lathe spindles and bearings and gives good access to smaller work pieces. The large jaw slides offer unrivalled strength and holding power that cannot be found in other chucks of this size.Supplied complete with the deep wood screw, 50 mm standard jaws and 2” faceplate this package offers unrivalled value. -
The Record Power RSBG8 Bench Grinder has a long-established reputation for robustness and reliability, making it the perfect choice for the home workshop. This new and upgraded machine has an industrial-inspired design with a heavy-duty motor and offers improved power, stability and performance. It features fully adjustable tool rests with solid locking mechanisms to give optimum support. The cast iron base and sturdy body reduce vibration to give the smooth operation that is essential for successful and accurate sharpening. Rubber feet also dampen vibration whilst ensuring the grinder does not move during use. The wide body of the machine further increases stability and minimises the load on the bearings for increased life. The 40 mm white stone is ideal for giving a fine finish, particularly to HSS turning tools, while the more coarse grey stone is perfect for rougher grinding and shaping. In addition, the spark guard of the white wheel features a magnifying lens to aid fine sharpening. The build quality and reliability of this grinder is significantly higher than some of the more common and cheaper machines which generally have lower powered motors and are substantially lighter. Record Power grinders are designed to give many years of service and replacement stones are readily available should the original ones become worn out, a sure sign of the robustness of these machines.
-
Gift Card available to use against any product or course.
